www.magnate.net

Shop Online

Home > Bandsaw Blades > Carbon Steel Blades - Wood or Metal Cutting > Carbon Steel Bandsaw Blade, 131-1/2" Long

We found 58 results matching your criteria.

Sort By:

Page of 1

Magnate M131.5C14R24 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/4" Width; 24 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C14R24 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/4" Width; 24 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C14R24 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/4" Width; 24 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $18.50

Our Price: $16.82

Savings: $1.68

Qty

Add

Magnate M131.5C14H4 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/4" Width; 4 Hook Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C14H4 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/4" Width; 4 Hook Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C14H4 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/4" Width; 4 Hook Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $18.57

Our Price: $16.88

Savings: $1.69

Qty

Add

Magnate M131.5C14H6 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C14H6 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C14H6 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $18.57

Our Price: $16.88

Savings: $1.69

Qty

Add

Magnate M131.5C14R10 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/4" Width; 10 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C14R10 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/4" Width; 10 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C14R10 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/4" Width; 10 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $18.57

Our Price: $16.88

Savings: $1.69

Qty

Add

Magnate M131.5C14R14 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/4" Width; 14 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C14R14 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/4" Width; 14 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C14R14 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/4" Width; 14 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $18.57

Our Price: $16.88

Savings: $1.69

Qty

Add

Magnate M131.5C14R18 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/4" Width; 18 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C14R18 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/4" Width; 18 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C14R18 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/4" Width; 18 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $18.57

Our Price: $16.88

Savings: $1.69

Qty

Add

Magnate M131.5C14W32 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/4" Width; 32 Wavy Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C14W32 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/4" Width; 32 Wavy Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C14W32 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/4" Width; 32 Wavy Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 1/32" to 1/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $18.57

Our Price: $16.88

Savings: $1.69

Qty

Add

List Price: $18.57

Our Price: $16.88

Savings: $1.69

Qty

Add

Magnate M131.5C38R24 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/8" Width; 24 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C38R24 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/8" Width; 24 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C38R24 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/8" Width; 24 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $19.14

Our Price: $17.40

Savings: $1.74

Qty

Add

Carbon Steel Bandsaw Blade, 131-1/2" Long , For Wood or Metal Cutting: M131.5C58R18

Carbon Steel Bandsaw Blade, 131-1/2" Long , For Wood or Metal Cutting: M131.5C58R18

5/8" Width; 18 Raker Tooth; 0.032" Thickness; 0.057" Kerf;

Our Price: $18.33

Qty

Add

Magnate M131.5C38H3 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/8" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C38H3 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/8" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C38H3 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/8" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $20.59

Our Price: $18.72

Savings: $1.87

Qty

Add

Magnate M131.5C38H4 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C38H4 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C38H4 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $20.59

Our Price: $18.72

Savings: $1.87

Qty

Add

Magnate M131.5C38H6 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/8" Width; 6 Hook Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C38H6 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/8" Width; 6 Hook Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C38H6 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/8" Width; 6 Hook Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $20.59

Our Price: $18.72

Savings: $1.87

Qty

Add

Magnate M131.5C38R10 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/8" Width; 10 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C38R10 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/8" Width; 10 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C38R10 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/8" Width; 10 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $20.59

Our Price: $18.72

Savings: $1.87

Qty

Add

Magnate M131.5C38R14 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/8" Width; 14 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C38R14 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/8" Width; 14 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C38R14 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/8" Width; 14 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $20.59

Our Price: $18.72

Savings: $1.87

Qty

Add

Magnate M131.5C38R18 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/8" Width; 18 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C38R18 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/8" Width; 18 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C38R18 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/8" Width; 18 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $20.59

Our Price: $18.72

Savings: $1.87

Qty

Add

Magnate M131.5C38R8 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/8" Width; 8 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C38R8 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/8" Width; 8 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C38R8 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/8" Width; 8 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 3/8" to 1" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $20.59

Our Price: $18.72

Savings: $1.87

Qty

Add

Magnate M131.5C316R10 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/16" Width; 10 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C316R10 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/16" Width; 10 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C316R10 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/16" Width; 10 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $21.76

Our Price: $19.78

Savings: $1.98

Qty

Add

Magnate M131.5C316R14 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/16" Width; 14 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C316R14 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/16" Width; 14 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C316R14 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/16" Width; 14 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $21.76

Our Price: $19.78

Savings: $1.98

Qty

Add

Magnate M131.5C316R18 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/16" Width; 18 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C316R18 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/16" Width; 18 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C316R18 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/16" Width; 18 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $21.76

Our Price: $19.78

Savings: $1.98

Qty

Add

Magnate M131.5C316R24 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/16" Width; 24 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C316R24 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/16" Width; 24 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C316R24 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/16" Width; 24 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $21.76

Our Price: $19.78

Savings: $1.98

Qty

Add

Magnate M131.5C316S4 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/16" Width; 4 Skip Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C316S4 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/16" Width; 4 Skip Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C316S4 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/16" Width; 4 Skip Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

For cutting 3/4??4-1/2? thick materials

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $21.76

Our Price: $19.78

Savings: $1.98

Qty

Add

Magnate M131.5C316H6 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/16" Width; 6 Hook Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C316H6 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/16" Width; 6 Hook Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C316H6 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/16" Width; 6 Hook Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $21.76

Our Price: $19.78

Savings: $1.98

Qty

Add

Magnate M131.5C12H3 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C12H3 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C12H3 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $22.41

Our Price: $20.37

Savings: $2.04

Qty

Add

Magnate M131.5C12H4 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C12H4 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C12H4 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $22.41

Our Price: $20.37

Savings: $2.04

Qty

Add

Magnate M131.5C12H6 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C12H6 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C12H6 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $22.41

Our Price: $20.37

Savings: $2.04

Qty

Add

Magnate M131.5C12R10 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/2" Width; 10 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C12R10 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/2" Width; 10 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C12R10 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/2" Width; 10 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $22.41

Our Price: $20.37

Savings: $2.04

Qty

Add

Magnate M131.5C12R14 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C12R14 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C12R14 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $22.41

Our Price: $20.37

Savings: $2.04

Qty

Add

Magnate M131.5C12R18 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C12R18 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C12R18 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $22.41

Our Price: $20.37

Savings: $2.04

Qty

Add

Magnate M131.5C12R24 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/2" Width; 24 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C12R24 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/2" Width; 24 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C12R24 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/2" Width; 24 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $22.41

Our Price: $20.37

Savings: $2.04

Qty

Add

Magnate M131.5C316S6 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/16" Width; 6 Skip Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C316S6 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/16" Width; 6 Skip Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C316S6 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/16" Width; 6 Skip Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $22.41

Our Price: $20.37

Savings: $2.04

Qty

Add

Magnate M131.5C12W32 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/2" Width; 32 Wavy Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C12W32 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/2" Width; 32 Wavy Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C12W32 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/2" Width; 32 Wavy Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 1/32" to 1/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $22.41

Our Price: $20.37

Savings: $2.04

Qty

Add

Magnate M131.5C58H4 Carbon Steel Bandsaw Blade, 131-1/2" Long - 5/8" Width; 4 Hook Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C58H4 Carbon Steel Bandsaw Blade, 131-1/2" Long - 5/8" Width; 4 Hook Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C58H4 Carbon Steel Bandsaw Blade, 131-1/2" Long - 5/8" Width; 4 Hook Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $25.26

Our Price: $22.96

Savings: $2.30

Qty

Add

Magnate M131.5C58R10 Carbon Steel Bandsaw Blade, 131-1/2" Long - 5/8" Width; 10 Raker Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C58R10 Carbon Steel Bandsaw Blade, 131-1/2" Long - 5/8" Width; 10 Raker Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C58R10 Carbon Steel Bandsaw Blade, 131-1/2" Long - 5/8" Width; 10 Raker Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $25.26

Our Price: $22.96

Savings: $2.30

Qty

Add

Magnate M131.5C34H2 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/4" Width; 2 Hook Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C34H2 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/4" Width; 2 Hook Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C34H2 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/4" Width; 2 Hook Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 2" to 6" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $26.43

Our Price: $24.03

Savings: $2.40

Qty

Add

Magnate M131.5C34H3 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/4" Width; 3 Hook Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C34H3 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/4" Width; 3 Hook Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C34H3 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/4" Width; 3 Hook Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $26.43

Our Price: $24.03

Savings: $2.40

Qty

Add

Magnate M131.5C34H4 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/4" Width; 4 Hook Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C34H4 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/4" Width; 4 Hook Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C34H4 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/4" Width; 4 Hook Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $26.43

Our Price: $24.03

Savings: $2.40

Qty

Add

Magnate M131.5C34H6 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/4" Width; 6 Hook Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C34H6 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/4" Width; 6 Hook Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C34H6 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/4" Width; 6 Hook Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $26.43

Our Price: $24.03

Savings: $2.40

Qty

Add

Magnate M131.5C34R10 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/4" Width; 10 Raker Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C34R10 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/4" Width; 10 Raker Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C34R10 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/4" Width; 10 Raker Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $26.43

Our Price: $24.03

Savings: $2.40

Qty

Add

Magnate M131.5C34R14 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/4" Width; 14 Raker Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C34R14 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/4" Width; 14 Raker Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C34R14 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/4" Width; 14 Raker Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $26.43

Our Price: $24.03

Savings: $2.40

Qty

Add

Magnate M131.5C34R18 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/4" Width; 18 Raker Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C34R18 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/4" Width; 18 Raker Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C34R18 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/4" Width; 18 Raker Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $26.43

Our Price: $24.03

Savings: $2.40

Qty

Add

Magnate M131.5C34R6 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/4" Width; 6 Raker Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C34R6 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/4" Width; 6 Raker Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C34R6 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/4" Width; 6 Raker Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $26.43

Our Price: $24.03

Savings: $2.40

Qty

Add

Magnate M131.5C34R8 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/4" Width; 8 Raker Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C34R8 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/4" Width; 8 Raker Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C34R8 Carbon Steel Bandsaw Blade, 131-1/2" Long - 3/4" Width; 8 Raker Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 3/8" to 1" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $26.43

Our Price: $24.03

Savings: $2.40

Qty

Add

Magnate M131.5C58H3 Carbon Steel Bandsaw Blade, 131-1/2" Long - 5/8" Width; 3 Hook Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C58H3 Carbon Steel Bandsaw Blade, 131-1/2" Long - 5/8" Width; 3 Hook Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C58H3 Carbon Steel Bandsaw Blade, 131-1/2" Long - 5/8" Width; 3 Hook Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $26.43

Our Price: $24.03

Savings: $2.40

Qty

Add

Magnate M131.5C58R14 Carbon Steel Bandsaw Blade, 131-1/2" Long - 5/8" Width; 14 Raker Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C58R14 Carbon Steel Bandsaw Blade, 131-1/2" Long - 5/8" Width; 14 Raker Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C58R14 Carbon Steel Bandsaw Blade, 131-1/2" Long - 5/8" Width; 14 Raker Tooth; 0.032" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $26.43

Our Price: $24.03

Savings: $2.40

Qty

Add

Magnate M131.5C18R14 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/8" Width; 14 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C18R14 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/8" Width; 14 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C18R14 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/8" Width; 14 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $26.76

Our Price: $24.33

Savings: $2.43

Qty

Add

Magnate M131.5C18R18 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/8" Width; 18 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C18R18 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/8" Width; 18 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C18R18 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1/8" Width; 18 Raker Tooth; 0.025" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $26.76

Our Price: $24.33

Savings: $2.43

Qty

Add

Magnate M131.5C1R8 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1" Width; 8 Raker Tooth; 0.035" Thickness; .073" Kerf

Magnate M131.5C1R8 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1" Width; 8 Raker Tooth; 0.035" Thickness; .073" Kerf

10' 11-1/2" (10 feet 11-1/2 inch) Long, 10' 11-1/2" (10 feet 11-1/2 inch) Long, Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel ), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.All bandsaw blades carried by Magnate (TM) are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item.

List Price: $30.72

Our Price: $27.93

Savings: $2.79

Qty

Add

Magnate M131.5C1H6 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1" Width; 6 Hook Tooth; 0.035" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C1H6 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1" Width; 6 Hook Tooth; 0.035" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C1H6 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1" Width; 6 Hook Tooth; 0.035" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $32.09

Our Price: $29.17

Savings: $2.92

Qty

Add

Magnate M131.5C1H1.3 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1" Width; 1.3 Hook Tooth; 0.035" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C1H1.3 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1" Width; 1.3 Hook Tooth; 0.035" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C1H1.3 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1" Width; 1.3 Hook Tooth; 0.035" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 3" to 12" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $32.86

Our Price: $29.87

Savings: $2.99

Qty

Add

Magnate M131.5C1H2 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1" Width; 2 Hook Tooth; 0.035" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C1H2 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1" Width; 2 Hook Tooth; 0.035" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C1H2 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1" Width; 2 Hook Tooth; 0.035" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 2" to 6" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $32.86

Our Price: $29.87

Savings: $2.99

Qty

Add

Magnate M131.5C1H3 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1" Width; 3 Hook Tooth; 0.035" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C1H3 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1" Width; 3 Hook Tooth; 0.035" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C1H3 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1" Width; 3 Hook Tooth; 0.035" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $32.86

Our Price: $29.87

Savings: $2.99

Qty

Add

Magnate M131.5C1H4 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1" Width; 4 Hook Tooth; 0.035" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C1H4 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1" Width; 4 Hook Tooth; 0.035" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C1H4 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1" Width; 4 Hook Tooth; 0.035" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $32.86

Our Price: $29.87

Savings: $2.99

Qty

Add

Magnate M131.5C1R10 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1" Width; 10 Raker Tooth; 0.035" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C1R10 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1" Width; 10 Raker Tooth; 0.035" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C1R10 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1" Width; 10 Raker Tooth; 0.035" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $32.86

Our Price: $29.87

Savings: $2.99

Qty

Add

Magnate M131.5C1R14 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1" Width; 14 Raker Tooth; 0.035" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C1R14 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1" Width; 14 Raker Tooth; 0.035" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C1R14 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1" Width; 14 Raker Tooth; 0.035" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $32.86

Our Price: $29.87

Savings: $2.99

Qty

Add

Magnate M131.5C1R6 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1" Width; 6 Raker Tooth; 0.035" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C1R6 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1" Width; 6 Raker Tooth; 0.035" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C1R6 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1" Width; 6 Raker Tooth; 0.035" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $32.86

Our Price: $29.87

Savings: $2.99

Qty

Add

Magnate M131.5C114H1.3 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1-1/4" Width; 1.3 Hook Tooth; 0.042" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C114H1.3 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1-1/4" Width; 1.3 Hook Tooth; 0.042" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C114H1.3 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1-1/4" Width; 1.3 Hook Tooth; 0.042" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 3" to 12" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $43.37

Our Price: $39.43

Savings: $3.94

Qty

Add

Magnate M131.5C112H1.15 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1-1/2" Width; 1.1 Hook Tooth; 0.042" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C112H1.15 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1-1/2" Width; 1.1 Hook Tooth; 0.042" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Magnate M131.5C112H1.15 Carbon Steel Bandsaw Blade, 131-1/2" Long - 1-1/2" Width; 1.1 Hook Tooth; 0.042" Thickness; 10' 11-1/2" (10 feet 11-1/2 inch) Long

Cuts solid materials approximately 4" to 16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 131-1/2 inch (10 ft. 11-1/2 in.; 10' 11-1/2"; 10 pies 11-1/2 pulgadas; 131-1/2 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: Grizzly G0513; Grizzly G0513X; Grizzly G0513X2; Grizzly G0640X Metal/Wood; General International 90-320 M1 (Metal/Wood); General International 90-240 M1 (131-5/8”, Wood); BRIDGEWOOD 17"

List Price: $48.31

Our Price: $43.92

Savings: $4.39

Qty

Add

To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>

All Magnate (TM) bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw  to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal ( i.e. aluminum, copper and brass ) at a range of 200-1,000 fpm.

However, to cut ferrous metals or mild steel ( don't cut hard steel ), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended.

The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use

* 24 raker to cut 1/16" to 1/4" thick material,
* 18 raker to cut 1/8" to 3/8" thick material,
* 14 raker to cut 3/16" to 7/16" thick material,
* 10 raker to cut 1/4" to 5/8" thick material,
* 6 Hook to cut 3/8" to 2" thick material,
* 4 Hook to cut 3/4" to 4-1/2" thick material,
* 3 Hook to cut 1" to 6" thick material,
* 2 Hook to cut 2" to 12" thick material.

The following bandsaw models use 131-1/2 inch ( 10 ft. 11-1/2 inch, 10' 11-1/2" ) bandsaw blades.

Grizzly G0513; G0513X2; G0513B; G0640X 17"; General International 90-320 M1 (Metalcutting);

Magnate, Inc.

Shop Online

Print Catalogs

Legacy® Shop Notes

Video Clips

News

Links

Order Information

Custom Tools

Sharpening

Company Information

My Account

Customer Service