www.magnate.net

Shop Online

Home > Bandsaw Blades > Carbon Steel Blades - Wood or Metal Cutting > Carbon Steel Bandsaw Blade, 176" Long

We found 55 results matching your criteria.

Sort By:

Page of 1

Magnate M176C14R24 Carbon Steel Bandsaw Blade, 176" Long - 1/4" Width; 24 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C14R24 Carbon Steel Bandsaw Blade, 176" Long - 1/4" Width; 24 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C14R24 Carbon Steel Bandsaw Blade, 176" Long - 1/4" Width; 24 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $22.52

Our Price: $20.47

Savings: $2.05

Qty

Add

Magnate M176C14H4 Carbon Steel Bandsaw Blade, 176" Long - 1/4" Width; 4 Hook Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C14H4 Carbon Steel Bandsaw Blade, 176" Long - 1/4" Width; 4 Hook Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C14H4 Carbon Steel Bandsaw Blade, 176" Long - 1/4" Width; 4 Hook Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $23.19

Our Price: $21.08

Savings: $2.11

Qty

Add

Magnate M176C14H6 Carbon Steel Bandsaw Blade, 176" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C14H6 Carbon Steel Bandsaw Blade, 176" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C14H6 Carbon Steel Bandsaw Blade, 176" Long - 1/4" Width; 6 Hook Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $23.19

Our Price: $21.08

Savings: $2.11

Qty

Add

Magnate M176C14R10 Carbon Steel Bandsaw Blade, 176" Long - 1/4" Width; 10 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C14R10 Carbon Steel Bandsaw Blade, 176" Long - 1/4" Width; 10 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C14R10 Carbon Steel Bandsaw Blade, 176" Long - 1/4" Width; 10 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $23.19

Our Price: $21.08

Savings: $2.11

Qty

Add

Magnate M176C14R14 Carbon Steel Bandsaw Blade, 176" Long - 1/4" Width; 14 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C14R14 Carbon Steel Bandsaw Blade, 176" Long - 1/4" Width; 14 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C14R14 Carbon Steel Bandsaw Blade, 176" Long - 1/4" Width; 14 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $23.19

Our Price: $21.08

Savings: $2.11

Qty

Add

Magnate M176C14R18 Carbon Steel Bandsaw Blade, 176" Long - 1/4" Width; 18 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C14R18 Carbon Steel Bandsaw Blade, 176" Long - 1/4" Width; 18 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C14R18 Carbon Steel Bandsaw Blade, 176" Long - 1/4" Width; 18 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $23.19

Our Price: $21.08

Savings: $2.11

Qty

Add

Magnate M176C14W32 Carbon Steel Bandsaw Blade, 176" Long - 1/4" Width; 32 Wavy Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C14W32 Carbon Steel Bandsaw Blade, 176" Long - 1/4" Width; 32 Wavy Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C14W32 Carbon Steel Bandsaw Blade, 176" Long - 1/4" Width; 32 Wavy Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 1/32" to 1/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $23.19

Our Price: $21.08

Savings: $2.11

Qty

Add

List Price: $23.19

Our Price: $21.08

Savings: $2.11

Qty

Add

Magnate M176C38R24 Carbon Steel Bandsaw Blade, 176" Long - 3/8" Width; 24 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C38R24 Carbon Steel Bandsaw Blade, 176" Long - 3/8" Width; 24 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C38R24 Carbon Steel Bandsaw Blade, 176" Long - 3/8" Width; 24 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $23.32

Our Price: $21.20

Savings: $2.12

Qty

Add

Magnate M176C38H3 Carbon Steel Bandsaw Blade, 176" Long - 3/8" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 14' 8" (14 feet 8 inch) Long

Magnate M176C38H3 Carbon Steel Bandsaw Blade, 176" Long - 3/8" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 14' 8" (14 feet 8 inch) Long

Magnate M176C38H3 Carbon Steel Bandsaw Blade, 176" Long - 3/8" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $25.94

Our Price: $23.58

Savings: $2.36

Qty

Add

Magnate M176C38H4 Carbon Steel Bandsaw Blade, 176" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 14' 8" (14 feet 8 inch) Long

Magnate M176C38H4 Carbon Steel Bandsaw Blade, 176" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 14' 8" (14 feet 8 inch) Long

Magnate M176C38H4 Carbon Steel Bandsaw Blade, 176" Long - 3/8" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $25.94

Our Price: $23.58

Savings: $2.36

Qty

Add

Magnate M176C38H6 Carbon Steel Bandsaw Blade, 176" Long - 3/8" Width; 6 Hook Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C38H6 Carbon Steel Bandsaw Blade, 176" Long - 3/8" Width; 6 Hook Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C38H6 Carbon Steel Bandsaw Blade, 176" Long - 3/8" Width; 6 Hook Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $25.94

Our Price: $23.58

Savings: $2.36

Qty

Add

Magnate M176C38R10 Carbon Steel Bandsaw Blade, 176" Long - 3/8" Width; 10 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C38R10 Carbon Steel Bandsaw Blade, 176" Long - 3/8" Width; 10 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C38R10 Carbon Steel Bandsaw Blade, 176" Long - 3/8" Width; 10 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $25.94

Our Price: $23.58

Savings: $2.36

Qty

Add

Magnate M176C38R14 Carbon Steel Bandsaw Blade, 176" Long - 3/8" Width; 14 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C38R14 Carbon Steel Bandsaw Blade, 176" Long - 3/8" Width; 14 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C38R14 Carbon Steel Bandsaw Blade, 176" Long - 3/8" Width; 14 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $25.94

Our Price: $23.58

Savings: $2.36

Qty

Add

Magnate M176C38R18 Carbon Steel Bandsaw Blade, 176" Long - 3/8" Width; 18 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C38R18 Carbon Steel Bandsaw Blade, 176" Long - 3/8" Width; 18 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C38R18 Carbon Steel Bandsaw Blade, 176" Long - 3/8" Width; 18 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $25.94

Our Price: $23.58

Savings: $2.36

Qty

Add

Magnate M176C38R8 Carbon Steel Bandsaw Blade, 176" Long - 3/8" Width; 8 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C38R8 Carbon Steel Bandsaw Blade, 176" Long - 3/8" Width; 8 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C38R8 Carbon Steel Bandsaw Blade, 176" Long - 3/8" Width; 8 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 3/8" to 1" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $25.94

Our Price: $23.58

Savings: $2.36

Qty

Add

Magnate M176C316R10 Carbon Steel Bandsaw Blade, 176" Long - 3/16" Width; 10 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C316R10 Carbon Steel Bandsaw Blade, 176" Long - 3/16" Width; 10 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C316R10 Carbon Steel Bandsaw Blade, 176" Long - 3/16" Width; 10 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $26.86

Our Price: $24.42

Savings: $2.44

Qty

Add

Magnate M176C316R14 Carbon Steel Bandsaw Blade, 176" Long - 3/16" Width; 14 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C316R14 Carbon Steel Bandsaw Blade, 176" Long - 3/16" Width; 14 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C316R14 Carbon Steel Bandsaw Blade, 176" Long - 3/16" Width; 14 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $26.86

Our Price: $24.42

Savings: $2.44

Qty

Add

Magnate M176C316R18 Carbon Steel Bandsaw Blade, 176" Long - 3/16" Width; 18 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C316R18 Carbon Steel Bandsaw Blade, 176" Long - 3/16" Width; 18 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C316R18 Carbon Steel Bandsaw Blade, 176" Long - 3/16" Width; 18 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $26.86

Our Price: $24.42

Savings: $2.44

Qty

Add

Magnate M176C316R24 Carbon Steel Bandsaw Blade, 176" Long - 3/16" Width; 24 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C316R24 Carbon Steel Bandsaw Blade, 176" Long - 3/16" Width; 24 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C316R24 Carbon Steel Bandsaw Blade, 176" Long - 3/16" Width; 24 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $26.86

Our Price: $24.42

Savings: $2.44

Qty

Add

Magnate M176C316S4 Carbon Steel Bandsaw Blade, 176" Long - 3/16" Width; 4 Skip Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C316S4 Carbon Steel Bandsaw Blade, 176" Long - 3/16" Width; 4 Skip Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C316S4 Carbon Steel Bandsaw Blade, 176" Long - 3/16" Width; 4 Skip Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

For cutting 3/4??4-1/2? thick materials

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $26.86

Our Price: $24.42

Savings: $2.44

Qty

Add

Magnate M176C316H6 Carbon Steel Bandsaw Blade, 176" Long - 3/16" Width; 6 Hook Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C316H6 Carbon Steel Bandsaw Blade, 176" Long - 3/16" Width; 6 Hook Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C316H6 Carbon Steel Bandsaw Blade, 176" Long - 3/16" Width; 6 Hook Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $26.86

Our Price: $24.42

Savings: $2.44

Qty

Add

Magnate M176C12H3 Carbon Steel Bandsaw Blade, 176" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 14' 8" (14 feet 8 inch) Long

Magnate M176C12H3 Carbon Steel Bandsaw Blade, 176" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 14' 8" (14 feet 8 inch) Long

Magnate M176C12H3 Carbon Steel Bandsaw Blade, 176" Long - 1/2" Width; 3 Hook Tooth; 0.025" Thickness; 032" thickness also available; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $28.41

Our Price: $25.83

Savings: $2.58

Qty

Add

Magnate M176C12H4 Carbon Steel Bandsaw Blade, 176" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 14' 8" (14 feet 8 inch) Long

Magnate M176C12H4 Carbon Steel Bandsaw Blade, 176" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 14' 8" (14 feet 8 inch) Long

Magnate M176C12H4 Carbon Steel Bandsaw Blade, 176" Long - 1/2" Width; 4 Hook Tooth; 0.025" Thickness; 032" thickness also available; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $28.41

Our Price: $25.83

Savings: $2.58

Qty

Add

Magnate M176C12H6 Carbon Steel Bandsaw Blade, 176" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C12H6 Carbon Steel Bandsaw Blade, 176" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C12H6 Carbon Steel Bandsaw Blade, 176" Long - 1/2" Width; 6 Hook Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $28.41

Our Price: $25.83

Savings: $2.58

Qty

Add

Magnate M176C12R10 Carbon Steel Bandsaw Blade, 176" Long - 1/2" Width; 10 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C12R10 Carbon Steel Bandsaw Blade, 176" Long - 1/2" Width; 10 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C12R10 Carbon Steel Bandsaw Blade, 176" Long - 1/2" Width; 10 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $28.41

Our Price: $25.83

Savings: $2.58

Qty

Add

Magnate M176C12R14 Carbon Steel Bandsaw Blade, 176" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C12R14 Carbon Steel Bandsaw Blade, 176" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C12R14 Carbon Steel Bandsaw Blade, 176" Long - 1/2" Width; 14 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $28.41

Our Price: $25.83

Savings: $2.58

Qty

Add

Magnate M176C12R18 Carbon Steel Bandsaw Blade, 176" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C12R18 Carbon Steel Bandsaw Blade, 176" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C12R18 Carbon Steel Bandsaw Blade, 176" Long - 1/2" Width; 18 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $28.41

Our Price: $25.83

Savings: $2.58

Qty

Add

Magnate M176C12R24 Carbon Steel Bandsaw Blade, 176" Long - 1/2" Width; 24 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C12R24 Carbon Steel Bandsaw Blade, 176" Long - 1/2" Width; 24 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C12R24 Carbon Steel Bandsaw Blade, 176" Long - 1/2" Width; 24 Raker Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 1/16" to 1/4" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $28.41

Our Price: $25.83

Savings: $2.58

Qty

Add

Magnate M176C316S6 Carbon Steel Bandsaw Blade, 176" Long - 3/16" Width; 6 Skip Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C316S6 Carbon Steel Bandsaw Blade, 176" Long - 3/16" Width; 6 Skip Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C316S6 Carbon Steel Bandsaw Blade, 176" Long - 3/16" Width; 6 Skip Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $28.41

Our Price: $25.83

Savings: $2.58

Qty

Add

Magnate M176C12W32 Carbon Steel Bandsaw Blade, 176" Long - 1/2" Width; 32 Wavy Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C12W32 Carbon Steel Bandsaw Blade, 176" Long - 1/2" Width; 32 Wavy Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C12W32 Carbon Steel Bandsaw Blade, 176" Long - 1/2" Width; 32 Wavy Tooth; 0.025" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 1/32" to 1/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $28.41

Our Price: $25.83

Savings: $2.58

Qty

Add

Magnate M176C58H4 Carbon Steel Bandsaw Blade, 176" Long - 5/8" Width; 4 Hook Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C58H4 Carbon Steel Bandsaw Blade, 176" Long - 5/8" Width; 4 Hook Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C58H4 Carbon Steel Bandsaw Blade, 176" Long - 5/8" Width; 4 Hook Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $31.35

Our Price: $28.50

Savings: $2.85

Qty

Add

Magnate M176C58R10 Carbon Steel Bandsaw Blade, 176" Long - 5/8" Width; 10 Raker Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C58R10 Carbon Steel Bandsaw Blade, 176" Long - 5/8" Width; 10 Raker Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C58R10 Carbon Steel Bandsaw Blade, 176" Long - 5/8" Width; 10 Raker Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $31.35

Our Price: $28.50

Savings: $2.85

Qty

Add

Magnate M176C34H2 Carbon Steel Bandsaw Blade, 176" Long - 3/4" Width; 2 Hook Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C34H2 Carbon Steel Bandsaw Blade, 176" Long - 3/4" Width; 2 Hook Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C34H2 Carbon Steel Bandsaw Blade, 176" Long - 3/4" Width; 2 Hook Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 2" to 6" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $33.91

Our Price: $30.83

Savings: $3.08

Qty

Add

Magnate M176C34H3 Carbon Steel Bandsaw Blade, 176" Long - 3/4" Width; 3 Hook Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C34H3 Carbon Steel Bandsaw Blade, 176" Long - 3/4" Width; 3 Hook Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C34H3 Carbon Steel Bandsaw Blade, 176" Long - 3/4" Width; 3 Hook Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $33.91

Our Price: $30.83

Savings: $3.08

Qty

Add

Magnate M176C34H4 Carbon Steel Bandsaw Blade, 176" Long - 3/4" Width; 4 Hook Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C34H4 Carbon Steel Bandsaw Blade, 176" Long - 3/4" Width; 4 Hook Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C34H4 Carbon Steel Bandsaw Blade, 176" Long - 3/4" Width; 4 Hook Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $33.91

Our Price: $30.83

Savings: $3.08

Qty

Add

Magnate M176C34H6 Carbon Steel Bandsaw Blade, 176" Long - 3/4" Width; 6 Hook Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C34H6 Carbon Steel Bandsaw Blade, 176" Long - 3/4" Width; 6 Hook Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C34H6 Carbon Steel Bandsaw Blade, 176" Long - 3/4" Width; 6 Hook Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $33.91

Our Price: $30.83

Savings: $3.08

Qty

Add

Magnate M176C34R10 Carbon Steel Bandsaw Blade, 176" Long - 3/4" Width; 10 Raker Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C34R10 Carbon Steel Bandsaw Blade, 176" Long - 3/4" Width; 10 Raker Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C34R10 Carbon Steel Bandsaw Blade, 176" Long - 3/4" Width; 10 Raker Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $33.91

Our Price: $30.83

Savings: $3.08

Qty

Add

Magnate M176C34R14 Carbon Steel Bandsaw Blade, 176" Long - 3/4" Width; 14 Raker Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C34R14 Carbon Steel Bandsaw Blade, 176" Long - 3/4" Width; 14 Raker Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C34R14 Carbon Steel Bandsaw Blade, 176" Long - 3/4" Width; 14 Raker Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $33.91

Our Price: $30.83

Savings: $3.08

Qty

Add

Magnate M176C34R18 Carbon Steel Bandsaw Blade, 176" Long - 3/4" Width; 18 Raker Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C34R18 Carbon Steel Bandsaw Blade, 176" Long - 3/4" Width; 18 Raker Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C34R18 Carbon Steel Bandsaw Blade, 176" Long - 3/4" Width; 18 Raker Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 1/8" to 3/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $33.91

Our Price: $30.83

Savings: $3.08

Qty

Add

Magnate M176C34R6 Carbon Steel Bandsaw Blade, 176" Long - 3/4" Width; 6 Raker Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C34R6 Carbon Steel Bandsaw Blade, 176" Long - 3/4" Width; 6 Raker Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C34R6 Carbon Steel Bandsaw Blade, 176" Long - 3/4" Width; 6 Raker Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $33.91

Our Price: $30.83

Savings: $3.08

Qty

Add

Magnate M176C34R8 Carbon Steel Bandsaw Blade, 176" Long - 3/4" Width; 8 Raker Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C34R8 Carbon Steel Bandsaw Blade, 176" Long - 3/4" Width; 8 Raker Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C34R8 Carbon Steel Bandsaw Blade, 176" Long - 3/4" Width; 8 Raker Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 3/8" to 1" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $33.91

Our Price: $30.83

Savings: $3.08

Qty

Add

Magnate M176C58H3 Carbon Steel Bandsaw Blade, 176" Long - 5/8" Width; 3 Hook Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C58H3 Carbon Steel Bandsaw Blade, 176" Long - 5/8" Width; 3 Hook Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C58H3 Carbon Steel Bandsaw Blade, 176" Long - 5/8" Width; 3 Hook Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $33.91

Our Price: $30.83

Savings: $3.08

Qty

Add

Magnate M176C58R14 Carbon Steel Bandsaw Blade, 176" Long - 5/8" Width; 14 Raker Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C58R14 Carbon Steel Bandsaw Blade, 176" Long - 5/8" Width; 14 Raker Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C58R14 Carbon Steel Bandsaw Blade, 176" Long - 5/8" Width; 14 Raker Tooth; 0.032" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $33.91

Our Price: $30.83

Savings: $3.08

Qty

Add

Magnate M176C1R8 Carbon Steel Bandsaw Blade, 176" Long - 1" Width; 8 Raker Tooth; 0.035" Thickness; .073" Kerf

Magnate M176C1R8 Carbon Steel Bandsaw Blade, 176" Long - 1" Width; 8 Raker Tooth; 0.035" Thickness; .073" Kerf

14' 8" (14 feet 8 inch) Long, Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel ), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.All bandsaw blades carried by Magnate (TM) are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item.

List Price: $39.60

Our Price: $36.00

Savings: $3.60

Qty

Add

Magnate M176C1H6 Carbon Steel Bandsaw Blade, 176" Long - 1" Width; 6 Hook Tooth; 0.035" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C1H6 Carbon Steel Bandsaw Blade, 176" Long - 1" Width; 6 Hook Tooth; 0.035" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C1H6 Carbon Steel Bandsaw Blade, 176" Long - 1" Width; 6 Hook Tooth; 0.035" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $41.28

Our Price: $37.53

Savings: $3.75

Qty

Add

Magnate M176C1H1.3 Carbon Steel Bandsaw Blade, 176" Long - 1" Width; 1.3 Hook Tooth; 0.035" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C1H1.3 Carbon Steel Bandsaw Blade, 176" Long - 1" Width; 1.3 Hook Tooth; 0.035" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C1H1.3 Carbon Steel Bandsaw Blade, 176" Long - 1" Width; 1.3 Hook Tooth; 0.035" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 3" to 12" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $42.16

Our Price: $38.33

Savings: $3.83

Qty

Add

Magnate M176C1H2 Carbon Steel Bandsaw Blade, 176" Long - 1" Width; 2 Hook Tooth; 0.035" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C1H2 Carbon Steel Bandsaw Blade, 176" Long - 1" Width; 2 Hook Tooth; 0.035" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C1H2 Carbon Steel Bandsaw Blade, 176" Long - 1" Width; 2 Hook Tooth; 0.035" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 2" to 6" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $42.16

Our Price: $38.33

Savings: $3.83

Qty

Add

Magnate M176C1H3 Carbon Steel Bandsaw Blade, 176" Long - 1" Width; 3 Hook Tooth; 0.035" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C1H3 Carbon Steel Bandsaw Blade, 176" Long - 1" Width; 3 Hook Tooth; 0.035" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C1H3 Carbon Steel Bandsaw Blade, 176" Long - 1" Width; 3 Hook Tooth; 0.035" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 1-1/2" to 3" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $42.16

Our Price: $38.33

Savings: $3.83

Qty

Add

Magnate M176C1H4 Carbon Steel Bandsaw Blade, 176" Long - 1" Width; 4 Hook Tooth; 0.035" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C1H4 Carbon Steel Bandsaw Blade, 176" Long - 1" Width; 4 Hook Tooth; 0.035" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C1H4 Carbon Steel Bandsaw Blade, 176" Long - 1" Width; 4 Hook Tooth; 0.035" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 1" to 2-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $42.16

Our Price: $38.33

Savings: $3.83

Qty

Add

Magnate M176C1R10 Carbon Steel Bandsaw Blade, 176" Long - 1" Width; 10 Raker Tooth; 0.035" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C1R10 Carbon Steel Bandsaw Blade, 176" Long - 1" Width; 10 Raker Tooth; 0.035" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C1R10 Carbon Steel Bandsaw Blade, 176" Long - 1" Width; 10 Raker Tooth; 0.035" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 5/16" to 5/8" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $42.16

Our Price: $38.33

Savings: $3.83

Qty

Add

Magnate M176C1R14 Carbon Steel Bandsaw Blade, 176" Long - 1" Width; 14 Raker Tooth; 0.035" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C1R14 Carbon Steel Bandsaw Blade, 176" Long - 1" Width; 14 Raker Tooth; 0.035" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C1R14 Carbon Steel Bandsaw Blade, 176" Long - 1" Width; 14 Raker Tooth; 0.035" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 3/16" to 7/16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $42.16

Our Price: $38.33

Savings: $3.83

Qty

Add

Magnate M176C1R6 Carbon Steel Bandsaw Blade, 176" Long - 1" Width; 6 Raker Tooth; 0.035" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C1R6 Carbon Steel Bandsaw Blade, 176" Long - 1" Width; 6 Raker Tooth; 0.035" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C1R6 Carbon Steel Bandsaw Blade, 176" Long - 1" Width; 6 Raker Tooth; 0.035" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 3/4" to 1-1/2" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $42.16

Our Price: $38.33

Savings: $3.83

Qty

Add

Magnate M176C114H1.3 Carbon Steel Bandsaw Blade, 176" Long - 1-1/4" Width; 1.3 Hook Tooth; 0.042" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C114H1.3 Carbon Steel Bandsaw Blade, 176" Long - 1-1/4" Width; 1.3 Hook Tooth; 0.042" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C114H1.3 Carbon Steel Bandsaw Blade, 176" Long - 1-1/4" Width; 1.3 Hook Tooth; 0.042" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 3" to 12" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $56.29

Our Price: $51.17

Savings: $5.12

Qty

Add

Magnate M176C112H1.15 Carbon Steel Bandsaw Blade, 176" Long - 1-1/2" Width; 1.1 Hook Tooth; 0.042" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C112H1.15 Carbon Steel Bandsaw Blade, 176" Long - 1-1/2" Width; 1.1 Hook Tooth; 0.042" Thickness; 14' 8" (14 feet 8 inch) Long

Magnate M176C112H1.15 Carbon Steel Bandsaw Blade, 176" Long - 1-1/2" Width; 1.1 Hook Tooth; 0.042" Thickness; 14' 8" (14 feet 8 inch) Long

Cuts solid materials approximately 4" to 16" thick

For ease of shipping, all bandsaw blades are coiled into multiple rings. The image of a coiled bandsaw blade is for illustrative purposes only, represents a single blade, and may vary from the actual item. If the bandsaw blade teeth are facing the wrong direction for your machine, simply flip the blade inside out to correct its direction. All Magnate bandsaw blades are welded and fabricated in the USA. While the coils and materials used are from U.S. brands, they may be sourced overseas.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal (i.e. aluminum, copper and brass) at a range of 200-1,000 fpm. However, to cut ferrous metals or mild steel (don't cut hard steel), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended. The following is a guideline for choosing an adequate tooth pattern to cut materials, Use * 24 raker to cut 1/16" to 1/4" thick material, * 18 raker to cut 1/8" to 3/8" thick material, * 14 raker to cut 3/16" to 7/16" thick material, * 10 raker to cut 1/4" to 5/8" thick material, * 6 Hook to cut 3/8" to 2" thick material, * 4 Hook to cut 3/4" to 4-1/2" thick material, * 3 Hook to cut 1" to 6" thick material, * 2 Hook to cut 2" to 12" thick material.

Safety Warning: Bandsaw blades are tightly coiled like a spring for packaging and can suddenly snap open when being coiled or uncoiled. Always wear heavy-duty leather gloves, along with proper eye and body protection, and handle the blade with extreme caution. Improper handling can result in serious injury. Refer to your bandsaw owner's/operation manual for complete safety guidelines. Important: Always disconnect the power before installing, removing, or measuring blades.

This 176 inch (14 ft. 8 in.; 14' 8"; 14 pies 8 pulgadas; 176 pulgadas hoja de sierra de cinta) bandsaw blade is compatible with the following bandsaw models: LAGUNA LT20x20; LOBO 24" BS-0242; GRIZZLY 24" G-3619 (163-5/8” to 176-1/2”); GRIZZLY 24"" G-3620 (173-5/8” to 176-1/2”); DoAll 261; DoAll 361; Forrest Mfg. Co. 106/14-W; Heska ESU-63; Jaespa AS-6; Marvel 8-M-1; Marvel 8-M-8; Marvel 8-M-8-M-9; Marvel 8-STD.; Meba 330-A; Peerless 2400-MH; Startrite H-330-A; Startrite H-330-SA

List Price: $62.61

Our Price: $56.92

Savings: $5.69

Qty

Add

To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>

All Magnate (TM) bandsaw blades are welded and fabricated in the USA. The coils/material are USA brands but may not be made in the USA. All band saw blades’ pictures depict a general bandsaw blade and thus may look different from each particular item.

Carbon tool steel bandsaw blades are designed to work with a woodcutting saw  to cut all types of woods 800-3,500 fpm; especially ideal for soft woods, i.e. pine, polar, fir and spruce. If used with a good release agent, it can cut plastics at a range of 200-800 fpm, or non-ferrous metal ( i.e. aluminum, copper and brass ) at a range of 200-1,000 fpm.

However, to cut ferrous metals or mild steel ( don't cut hard steel ), you must only use a metal-cutting saw at a range of 40-200 fpm. Having liquid coolant running along the back of the blade yields the best results is highly recommended.

The following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use

* 24 raker to cut 1/16" to 1/4" thick material,
* 18 raker to cut 1/8" to 3/8" thick material,
* 14 raker to cut 3/16" to 7/16" thick material,
* 10 raker to cut 1/4" to 5/8" thick material,
* 6 Hook to cut 3/8" to 2" thick material,
* 4 Hook to cut 3/4" to 4-1/2" thick material,
* 3 Hook to cut 1" to 6" thick material,
* 2 Hook to cut 2" to 12" thick material.

The following bandsaw models use 176 inch ( 14 ft. 8 inch, 14' 8" ) bandsaw blades.

Laguna LT20" x 20"

Magnate, Inc.

Shop Online

Print Catalogs

Legacy® Shop Notes

Video Clips

News

Links

Order Information

Custom Tools

Sharpening

Company Information

My Account

Customer Service