Print Catalogs

Legacy® Shop Notes

Video Clips

News

Links

Order Information

Custom Tools

Sharpening
Home > Amana® Tool > Amana® Boring Bits > Automatic Boring Machines > Brad Point Boring Bit - 70MM Long, 10MM Shank Carbide Tipped
We found 28 results matching your criteria.

Carbide Tipped
Application: Do not use in portable drills or routers.
Sort By:
Page of 1
Amana 204005 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 5.0mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204005 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 5.0mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204005 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 5.0mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $33.20
Our Price: $23.71
Savings: $9.49
Qty Add
Amana 204075 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 7.5mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204075 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 7.5mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204075 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 7.5mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $33.85
Our Price: $24.19
Savings: $9.66
Qty Add
Amana 204052 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 5.2mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204052 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 5.2mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204052 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 5.2mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $36.25
Our Price: $25.90
Savings: $10.35
Qty Add
Amana 204055 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 5.5mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204055 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 5.5mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204055 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 5.5mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $36.25
Our Price: $25.90
Savings: $10.35
Qty Add
Amana 204006 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 6.0mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204006 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 6.0mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204006 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 6.0mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $36.50
Our Price: $26.07
Savings: $10.43
Qty Add
Amana 204008 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 8mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204008 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 8mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204008 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 8mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $36.90
Our Price: $26.36
Savings: $10.54
Qty Add
Amana 204007 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 1/4" Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204007 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 1/4" Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204007 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 1/4" Cutting Diameter; 35mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $37.85
Our Price: $27.04
Savings: $10.81
Qty Add
Amana 204004 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 4.0mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204004 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 4.0mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204004 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 4.0mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $38.65
Our Price: $27.61
Savings: $11.04
Qty Add
Amana 204011 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 11mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204011 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 11mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204011 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 11mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $39.90
Our Price: $28.50
Savings: $11.40
Qty Add
Amana 204045 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 4.5mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204045 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 4.5mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204045 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 4.5mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $39.90
Our Price: $28.50
Savings: $11.40
Qty Add
Amana 204070 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 7mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204070 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 7mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204070 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 7mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $39.90
Our Price: $28.50
Savings: $11.40
Qty Add
Amana 204051 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 5.1mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204051 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 5.1mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204051 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 5.1mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $40.15
Our Price: $28.69
Savings: $11.46
Qty Add
Amana 204067 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 6.7mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204067 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 6.7mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204067 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 6.7mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $42.30
Our Price: $30.21
Savings: $12.09
Qty Add
Amana 204090 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 9.0mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204090 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 9.0mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204090 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 9.0mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $43.30
Our Price: $30.93
Savings: $12.37
Qty Add
Amana 204010 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 10mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204010 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 10mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204010 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 10mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $47.20
Our Price: $33.71
Savings: $13.49
Qty Add
Amana 204009 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 3/8" Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204009 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 3/8" Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204009 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 3/8" Cutting Diameter; 35mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $47.30
Our Price: $33.79
Savings: $13.51
Qty Add
Amana 204047 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 3/16" Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204047 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 3/16" Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204047 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 3/16" Cutting Diameter; 35mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $48.15
Our Price: $34.40
Savings: $13.75
Qty Add
Amana 204082 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 8.2mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204082 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 8.2mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204082 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 8.2mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $49.65
Our Price: $35.47
Savings: $14.18
Qty Add
Amana 204012 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 12mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204012 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 12mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204012 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 12mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $51.90
Our Price: $37.07
Savings: $14.83
Qty Add
Amana 204065 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 6.5mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204065 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 6.5mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204065 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 6.5mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $53.45
Our Price: $38.19
Savings: $15.26
Qty Add
Amana 204013 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 1/2" Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204013 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 1/2" Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204013 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 1/2" Cutting Diameter; 35mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $54.40
Our Price: $38.86
Savings: $15.54
Qty Add
Amana 204130 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 13mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204130 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 13mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204130 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 13mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $55.60
Our Price: $39.71
Savings: $15.89
Qty Add
Amana 204014 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 14mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204014 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 14mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204014 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 14mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $56.80
Our Price: $40.57
Savings: $16.23
Qty Add
Amana 204017 Brad Point Boring Bit - 70MM Long, 10MM Shank - Right Hand Rotation; 17mm Cutting Diameter; 70mm Overall Length; 35mm Boring Height
Amana 204017 Brad Point Boring Bit - 70MM Long, 10MM Shank - Right Hand Rotation; 17mm Cutting Diameter; 70mm Overall Length; 35mm Boring Height
Application: Do not use in portable drills or routers. more info
Our Price: $45.08
Qty Add
Amana 204111 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 7/16" Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204111 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 7/16" Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204111 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 7/16" Cutting Diameter; 35mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $63.90
Our Price: $45.64
Savings: $18.26
Qty Add
Amana 204113 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 5/8" Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204113 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 5/8" Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204113 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 5/8" Cutting Diameter; 35mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $64.00
Our Price: $45.71
Savings: $18.29
Qty Add
Amana 204015 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 15mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204015 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 15mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204015 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 15mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $80.80
Our Price: $57.71
Savings: $23.09
Qty Add
Amana 204016 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 16mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204016 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 16mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped
Amana 204016 Brad Point Right-Handed Boring Bit, 70mm OAL x 10mm Shank - 16mm Cutting Diameter; 35mm Cutting Height, Carbide Tipped

Application: Do not use in portable drills or routers. This dowel boring bit is coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away. Its coating is applied onto the bit at a temperature of 570 degree Fahrenheit. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

Please note: Product images are for illustrative purposes and may vary from the actual item. more info
List Price: $83.80
Our Price: $59.86
Savings: $23.94
Qty Add
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>