|
|
|
|
|
Magnate 8640 Taper Shell HSS Countersink - 3/8" Cutting Diameter; 1/8" Drill Diameter; 3/8" Shank Length, 1/2" Shank Diameter, 1-1/4" Overall Length
Magnate 8640 Taper Shell HSS Countersink - 3/8" Cutting Diameter; 1/8" Drill Diameter; 3/8" Shank Length, 1/2" Shank Diameter, 1-1/4" Overall Length
This high speed steel tapered shell countersink is designed for use in wood product containing glue or long production runs in hardwood. It also performs well in many plastics, composite materials and fiberglass. Drill ( not included ) is held in the center with a set of screws.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $15.94 Our Price: $14.35 Savings: $1.59
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8641 Taper Shell HSS Countersink - 3/8" Cutting Diameter; 3/16" Drill Diameter; 3/8" Shank Length, 1/2" Shank Diameter, 1-1/4" Overall Length
Magnate 8641 Taper Shell HSS Countersink - 3/8" Cutting Diameter; 3/16" Drill Diameter; 3/8" Shank Length, 1/2" Shank Diameter, 1-1/4" Overall Length
This high speed steel tapered shell countersink is designed for use in wood product containing glue or long production runs in hardwood. It also performs well in many plastics, composite materials and fiberglass. Drill ( not included ) is held in the center with a set of screws.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $16.01 Our Price: $14.41 Savings: $1.60
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8642 Taper Shell HSS Countersink - 1/2" Cutting Diameter; 1/8" Drill Diameter; 3/8" Shank Length, 1/2" Shank Diameter, 1-1/4" Overall Length
Magnate 8642 Taper Shell HSS Countersink - 1/2" Cutting Diameter; 1/8" Drill Diameter; 3/8" Shank Length, 1/2" Shank Diameter, 1-1/4" Overall Length
This high speed steel tapered shell countersink is designed for use in wood product containing glue or long production runs in hardwood. It also performs well in many plastics, composite materials and fiberglass. Drill ( not included ) is held in the center with a set of screws.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $16.97 Our Price: $15.27 Savings: $1.70
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8646 Taper Shell HSS Countersink - 1/2" Cutting Diameter; 3/16" Drill Diameter; 3/8" Shank Length, 1/2" Shank Diameter, 1-1/4" Overall Length
Magnate 8646 Taper Shell HSS Countersink - 1/2" Cutting Diameter; 3/16" Drill Diameter; 3/8" Shank Length, 1/2" Shank Diameter, 1-1/4" Overall Length
This high speed steel tapered shell countersink is designed for use in wood product containing glue or long production runs in hardwood. It also performs well in many plastics, composite materials and fiberglass. Drill ( not included ) is held in the center with a set of screws.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $17.14 Our Price: $15.43 Savings: $1.71
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8649 Taper Shell HSS Countersink - 1/2" Cutting Diameter; 1/4" Drill Diameter; 3/8" Shank Length, 1/2" Shank Diameter, 1-1/4" Overall Length
Magnate 8649 Taper Shell HSS Countersink - 1/2" Cutting Diameter; 1/4" Drill Diameter; 3/8" Shank Length, 1/2" Shank Diameter, 1-1/4" Overall Length
This high speed steel tapered shell countersink is designed for use in wood product containing glue or long production runs in hardwood. It also performs well in many plastics, composite materials and fiberglass. Drill ( not included ) is held in the center with a set of screws.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $17.66 Our Price: $15.89 Savings: $1.77
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8654 Adjustable Countersink For Wood Screws - 7/16" - 19/32" Overall Diameter; 2-Wing, 45 Degree Carbide Tipped
Magnate 8654 Adjustable Countersink For Wood Screws - 7/16" - 19/32" Overall Diameter; 2-Wing, 45 Degree Carbide Tipped
Accept drills from 3/32" to 9/32". (Wood screw sizes from #2 to #18). Drills not included.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $19.08 Our Price: $17.17 Savings: $1.91
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8624 Adjustable Carbide Tipped Face Frame Counterbore - 3/8" Outside Diameter; 0.136" Drill Diameter; 9/32" Carbide Height, 3/8" Shank Diameter, 4" Overall Length
Magnate 8624 Adjustable Carbide Tipped Face Frame Counterbore - 3/8" Outside Diameter; 0.136" Drill Diameter; 9/32" Carbide Height, 3/8" Shank Diameter, 4" Overall Length
This carbide tipped counterbore bit is for use with hand drills or drill presses; with #29 HSS Pilot Drill: 82-degree included angle; pilot diameter 0.136” (3.45 mm); 3/8” cutting length; 3” overall length. For use in wood, plastics, aluminum, and mild steel. Use #29 drill bit for replacement.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $20.21 Our Price: $18.19 Savings: $2.02
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8634 Adjustable Carbide Tipped Face Frame Countersink - 0.136" Drill Diameter; 3/8" Outside Diameter; 9/32" Carbide Height, 3/8" Shank Diameter, 4" Overall Length, 45 Degree
Magnate 8634 Adjustable Carbide Tipped Face Frame Countersink - 0.136" Drill Diameter; 3/8" Outside Diameter; 9/32" Carbide Height, 3/8" Shank Diameter, 4" Overall Length, 45 Degree
This 45-degree carbide tipped countersink bit is for use with hand drills or drill presses; with #29 HSS Pilot Drill: 82-degree included angle; pilot diameter 0.136” (3.45 mm); 3/8” cutting length; 3” overall length. For use in wood, plastics, aluminum, and mild steel. Use #29 drill bit for replacement.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $20.23 Our Price: $18.21 Savings: $2.02
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate C08016R Countersink, Mount on Spiral - 16mm Outside Diameter; 8mm Inside Diameter
Designed for clamping on the spiral of the Brad Point or V Point boring/drill bit. The bit shown on the picture is not included.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate C08016L Countersink, Mount on Spiral - 16mm Outside Diameter; 8mm Inside Diameter
Designed for clamping on the spiral of the Brad Point or V Point boring/drill bit. The bit shown on the picture is not included.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate C09016L Countersink, Mount on Spiral - 18mm Outside Diameter; 9mm Inside Diameter
Designed for clamping on the spiral of the Brad Point or V Point boring/drill bit. The bit shown on the picture is not included.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate C09016R Countersink, Mount on Spiral - 18mm Outside Diameter; 9mm Inside Diameter
Designed for clamping on the spiral of the Brad Point or V Point boring/drill bit. The bit shown on the picture is not included.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate C04016L Countersink, Mount on Spiral - 4mm Inside Diameter; 16mm Outside Diameter; Carbide Tipped, Left Rotation
Magnate C04016L Countersink, Mount on Spiral - 4mm Inside Diameter; 16mm Outside Diameter; Carbide Tipped, Left Rotation
Designed for clamping on the spiral of the Brad Point or V Point boring/drill bit. The bit shown on the picture is not included.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $36.17 Our Price: $32.55 Savings: $3.62
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate C04016R Countersink, Mount on Spiral - 4mm Inside Diameter; 16mm Outside Diameter; Carbide Tipped, Right Rotation
Magnate C04016R Countersink, Mount on Spiral - 4mm Inside Diameter; 16mm Outside Diameter; Carbide Tipped, Right Rotation
Designed for clamping on the spiral of the Brad Point or V Point boring/drill bit. The bit shown on the picture is not included.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $36.17 Our Price: $32.55 Savings: $3.62
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate C05016L Countersink, Mount on Spiral - 5mm Inside Diameter; 16mm Outside Diameter; Carbide Tipped, Left Rotation
Magnate C05016L Countersink, Mount on Spiral - 5mm Inside Diameter; 16mm Outside Diameter; Carbide Tipped, Left Rotation
Designed for clamping on the spiral of the Brad Point or V Point boring/drill bit. The bit shown on the picture is not included.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $36.17 Our Price: $32.55 Savings: $3.62
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate C05016R Countersink, Mount on Spiral - 5mm Inside Diameter; 16mm Outside Diameter; Carbide Tipped, Right Rotation
Magnate C05016R Countersink, Mount on Spiral - 5mm Inside Diameter; 16mm Outside Diameter; Carbide Tipped, Right Rotation
Designed for clamping on the spiral of the Brad Point or V Point boring/drill bit. The bit shown on the picture is not included.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $36.17 Our Price: $32.55 Savings: $3.62
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate C06016L Countersink, Mount on Spiral - 6mm Inside Diameter; 16mm Outside Diameter; Carbide Tipped, Left Rotation
Magnate C06016L Countersink, Mount on Spiral - 6mm Inside Diameter; 16mm Outside Diameter; Carbide Tipped, Left Rotation
Designed for clamping on the spiral of the Brad Point or V Point boring/drill bit. The bit shown on the picture is not included.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $36.17 Our Price: $32.55 Savings: $3.62
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate C06016R Countersink, Mount on Spiral - 6mm Inside Diameter; 16mm Outside Diameter; Carbide Tipped, Right Rotation
Magnate C06016R Countersink, Mount on Spiral - 6mm Inside Diameter; 16mm Outside Diameter; Carbide Tipped, Right Rotation
Designed for clamping on the spiral of the Brad Point or V Point boring/drill bit. The bit shown on the picture is not included.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $36.17 Our Price: $32.55 Savings: $3.62
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate C07016L Countersink, Mount on Spiral - 7mm Inside Diameter; 16mm Outside Diameter; Carbide Tipped, Left Rotation
Magnate C07016L Countersink, Mount on Spiral - 7mm Inside Diameter; 16mm Outside Diameter; Carbide Tipped, Left Rotation
Designed for clamping on the spiral of the Brad Point or V Point boring/drill bit. The bit shown on the picture is not included.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $36.17 Our Price: $32.55 Savings: $3.62
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate C07016R Countersink, Mount on Spiral - 7mm Inside Diameter; 16mm Outside Diameter; Carbide Tipped, Right Rotation
Magnate C07016R Countersink, Mount on Spiral - 7mm Inside Diameter; 16mm Outside Diameter; Carbide Tipped, Right Rotation
Designed for clamping on the spiral of the Brad Point or V Point boring/drill bit. The bit shown on the picture is not included.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $36.17 Our Price: $32.55 Savings: $3.62
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate C63516L Countersink, Mount on Spiral - 6.35mm (1/4") Inside Diameter; 16mm Outside Diameter; Carbide Tipped, Left Rotation
Magnate C63516L Countersink, Mount on Spiral - 6.35mm (1/4") Inside Diameter; 16mm Outside Diameter; Carbide Tipped, Left Rotation
Designed for clamping on the spiral of the Brad Point or V Point boring/drill bit. The bit shown on the picture is not included.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $36.17 Our Price: $32.55 Savings: $3.62
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate C63516R Countersink, Mount on Spiral - 6.35mm (1/4") Inside Diameter; 16mm Outside Diameter; Carbide Tipped, Right Rotation
Magnate C63516R Countersink, Mount on Spiral - 6.35mm (1/4") Inside Diameter; 16mm Outside Diameter; Carbide Tipped, Right Rotation
Designed for clamping on the spiral of the Brad Point or V Point boring/drill bit. The bit shown on the picture is not included.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $36.17 Our Price: $32.55 Savings: $3.62
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate H62302 Adjustable Counterbore, High Speed Steel - 1/2" Outside Diameter; 3/16" Inside Diameter
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate C08018L Countersink, Mount on Spiral - 8mm Inside Diameter; 18mm Outside Diameter; Carbide Tipped, Left Rotation
Magnate C08018L Countersink, Mount on Spiral - 8mm Inside Diameter; 18mm Outside Diameter; Carbide Tipped, Left Rotation
Designed for clamping on the spiral of the Brad Point or V Point boring/drill bit. The bit shown on the picture is not included.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $39.22 Our Price: $35.30 Savings: $3.92
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate C08018R Countersink, Mount on Spiral - 8mm Inside Diameter; 18mm Outside Diameter; Carbide Tipped, Right Rotation
Magnate C08018R Countersink, Mount on Spiral - 8mm Inside Diameter; 18mm Outside Diameter; Carbide Tipped, Right Rotation
Designed for clamping on the spiral of the Brad Point or V Point boring/drill bit. The bit shown on the picture is not included.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $39.22 Our Price: $35.30 Savings: $3.92
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate C09018L Countersink, Mount on Spiral - 9mm Inside Diameter; 18mm Outside Diameter; Carbide Tipped, Left Rotation
Magnate C09018L Countersink, Mount on Spiral - 9mm Inside Diameter; 18mm Outside Diameter; Carbide Tipped, Left Rotation
Designed for clamping on the spiral of the Brad Point or V Point boring/drill bit. The bit shown on the picture is not included.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $39.22 Our Price: $35.30 Savings: $3.92
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate C09018R Countersink, Mount on Spiral - 9mm Inside Diameter; 18mm Outside Diameter; Carbide Tipped, Right Rotation
Magnate C09018R Countersink, Mount on Spiral - 9mm Inside Diameter; 18mm Outside Diameter; Carbide Tipped, Right Rotation
Designed for clamping on the spiral of the Brad Point or V Point boring/drill bit. The bit shown on the picture is not included.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $39.22 Our Price: $35.30 Savings: $3.92
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate C10020L Countersink, Mount on Spiral - 10mm Inside Diameter; 20mm Outside Diameter; Carbide Tipped, Left Rotation
Magnate C10020L Countersink, Mount on Spiral - 10mm Inside Diameter; 20mm Outside Diameter; Carbide Tipped, Left Rotation
Designed for clamping on the spiral of the Brad Point or V Point boring/drill bit. The bit shown on the picture is not included.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $41.87 Our Price: $37.68 Savings: $4.19
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate C10020R Countersink, Mount on Spiral - 10mm Inside Diameter; 20mm Outside Diameter; Carbide Tipped, Right Rotation
Magnate C10020R Countersink, Mount on Spiral - 10mm Inside Diameter; 20mm Outside Diameter; Carbide Tipped, Right Rotation
Designed for clamping on the spiral of the Brad Point or V Point boring/drill bit. The bit shown on the picture is not included.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $41.87 Our Price: $37.68 Savings: $4.19
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate C12020L Countersink, Mount on Spiral - 12mm Inside Diameter; 20mm Outside Diameter; Carbide Tipped, Left Rotation
Magnate C12020L Countersink, Mount on Spiral - 12mm Inside Diameter; 20mm Outside Diameter; Carbide Tipped, Left Rotation
Designed for clamping on the spiral of the Brad Point or V Point boring/drill bit. The bit shown on the picture is not included.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $41.87 Our Price: $37.68 Savings: $4.19
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate C12020R Countersink, Mount on Spiral - 12mm Inside Diameter; 20mm Outside Diameter; Carbide Tipped, Right Rotation
Magnate C12020R Countersink, Mount on Spiral - 12mm Inside Diameter; 20mm Outside Diameter; Carbide Tipped, Right Rotation
Designed for clamping on the spiral of the Brad Point or V Point boring/drill bit. The bit shown on the picture is not included.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $41.87 Our Price: $37.68 Savings: $4.19
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate C10020LD Countersink, Mount on Shank - 20mm Outside Diameter; 10mm Inside Diameter; Carbide Tipped, Left Rotation
Magnate C10020LD Countersink, Mount on Shank - 20mm Outside Diameter; 10mm Inside Diameter; Carbide Tipped, Left Rotation
Designed for clamping on the shank of the Brad Point or V Point boring/drill bit. The bit shown on the picture is not included.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $42.28 Our Price: $38.05 Savings: $4.23
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate C10020RD Countersink, Mount on Shank - 20mm Outside Diameter; Shank Diameter; Carbide Tipped, Right Rotation
Magnate C10020RD Countersink, Mount on Shank - 20mm Outside Diameter; Shank Diameter; Carbide Tipped, Right Rotation
Designed for clamping on the shank of the Brad Point or V Point boring/drill bit. The bit shown on the picture is not included.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $42.28 Our Price: $38.05 Savings: $4.23
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate H62301 Adjustable HSS Counterbore - 3/8" Outside Diameter; 3/16" Inside Diameter; 1-1/2" Overall Length
Magnate H62301 Adjustable HSS Counterbore - 3/8" Outside Diameter; 3/16" Inside Diameter; 1-1/2" Overall Length
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $44.72 Our Price: $40.25 Savings: $4.47
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate C16025L Countersink, Mount on Spiral - 16mm Inside Diameter; 25mm Outside Diameter; Carbide Tipped, Left Rotation
Magnate C16025L Countersink, Mount on Spiral - 16mm Inside Diameter; 25mm Outside Diameter; Carbide Tipped, Left Rotation
Designed for clamping on the spiral of the Brad Point or V Point boring/drill bit. The bit shown on the picture is not included.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $49.41 Our Price: $44.47 Savings: $4.94
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate C16025R Countersink, Mount on Spiral - 16mm Inside Diameter; 25mm Outside Diameter; Carbide Tipped, Right Rotation
Magnate C16025R Countersink, Mount on Spiral - 16mm Inside Diameter; 25mm Outside Diameter; Carbide Tipped, Right Rotation
Designed for clamping on the spiral of the Brad Point or V Point boring/drill bit. The bit shown on the picture is not included.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $49.41 Our Price: $44.47 Savings: $4.94
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H62304 Adjustable HSS Counterbore - 1/2" Outside Diameter; 1/4" Inside Diameter; 1-1/2" Overall Length
Magnate H62304 Adjustable HSS Counterbore - 1/2" Outside Diameter; 1/4" Inside Diameter; 1-1/2" Overall Length
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $49.41 Our Price: $44.47 Savings: $4.94
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate H62261 Adjustable HSS 1/2" Shank Diameter Counterbore - 3/8" Outside Diameter; 1/8" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Magnate H62261 Adjustable HSS 1/2" Shank Diameter Counterbore - 3/8" Outside Diameter; 1/8" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $54.50 Our Price: $49.05 Savings: $5.45
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H62262 Adjustable HSS 1/2" Shank Diameter Counterbore - 3/8" Outside Diameter; 5/32" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Magnate H62262 Adjustable HSS 1/2" Shank Diameter Counterbore - 3/8" Outside Diameter; 5/32" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $54.50 Our Price: $49.05 Savings: $5.45
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H62263 Adjustable HSS 1/2" Shank Diameter Counterbore - 3/8" Outside Diameter; 3/16" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Magnate H62263 Adjustable HSS 1/2" Shank Diameter Counterbore - 3/8" Outside Diameter; 3/16" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $54.50 Our Price: $49.05 Savings: $5.45
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H62264 Adjustable HSS 1/2" Shank Diameter Counterbore - 7/16" Outside Diameter; 3/16" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Magnate H62264 Adjustable HSS 1/2" Shank Diameter Counterbore - 7/16" Outside Diameter; 3/16" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $54.50 Our Price: $49.05 Savings: $5.45
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H62265 Adjustable HSS 1/2" Shank Diameter Counterbore - 7/16" Outside Diameter; 7/32" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Magnate H62265 Adjustable HSS 1/2" Shank Diameter Counterbore - 7/16" Outside Diameter; 7/32" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $54.50 Our Price: $49.05 Savings: $5.45
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H62268 Adjustable HSS 1/2" Shank Diameter Counterbore - 1/2" Outside Diameter; 3/16" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Magnate H62268 Adjustable HSS 1/2" Shank Diameter Counterbore - 1/2" Outside Diameter; 3/16" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $54.50 Our Price: $49.05 Savings: $5.45
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H62269 Adjustable HSS 1/2" Shank Diameter Counterbore - 1/2" Outside Diameter; 7/32" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Magnate H62269 Adjustable HSS 1/2" Shank Diameter Counterbore - 1/2" Outside Diameter; 7/32" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $54.50 Our Price: $49.05 Savings: $5.45
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate H62270 Adjustable HSS 1/2" Shank Diameter Counterbore - 1/2" Outside Diameter; 1/4" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Magnate H62270 Adjustable HSS 1/2" Shank Diameter Counterbore - 1/2" Outside Diameter; 1/4" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $54.50 Our Price: $49.05 Savings: $5.45
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H62263LH Adjustable HSS 1/2" Shank Diameter Counterbore - 7/16" Outside Diameter; 3/16" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Left Rotation
Magnate H62263LH Adjustable HSS 1/2" Shank Diameter Counterbore - 7/16" Outside Diameter; 3/16" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Left Rotation
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $54.50 Our Price: $49.05 Savings: $5.45
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate H62282 Adjustable HSS 1/2" Shank Diameter Countersink - 3/8" Outside Diameter; 1/8" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $54.50 Our Price: $49.05 Savings: $5.45
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H62283 Adjustable HSS 1/2" Shank Diameter Countersink - 3/8" Outside Diameter; 5/32" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $54.50 Our Price: $49.05 Savings: $5.45
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H62284 Adjustable HSS 1/2" Shank Diameter Countersink - 3/8" Outside Diameter; 3/16" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $54.50 Our Price: $49.05 Savings: $5.45
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H62286 Adjustable HSS 1/2" Shank Diameter Countersink - 7/16" Outside Diameter; 7/32" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $54.50 Our Price: $49.05 Savings: $5.45
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H62289 Adjustable HSS 1/2" Shank Diameter Countersink - 1/2" Outside Diameter; 3/16" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $54.50 Our Price: $49.05 Savings: $5.45
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H62290 Adjustable HSS 1/2" Shank Diameter Countersink - 1/2" Outside Diameter; 7/32" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $54.50 Our Price: $49.05 Savings: $5.45
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H62291 Adjustable HSS 1/2" Shank Diameter Countersink - 1/2" Outside Diameter; 1/4" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $54.50 Our Price: $49.05 Savings: $5.45
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate H62313-7/16 Adjustable Counterbore, High Speed Steel - 1" Outside Diameter; 7/16" Inside Diameter
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate H62249 Adjustable HSS 7/16"-14 Threaded Shank Counterbore - 3/8" Outside Diameter; 3/16" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $63.67 Our Price: $57.30 Savings: $6.37
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H62250 Adjustable HSS 7/16"-14 Threaded Shank Counterbore - 1/2" Outside Diameter; 3/16" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $63.67 Our Price: $57.30 Savings: $6.37
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H62251 Adjustable HSS 7/16"-14 Threaded Shank Counterbore - 1/2" Outside Diameter; 7/32" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $63.67 Our Price: $57.30 Savings: $6.37
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H62252 Adjustable HSS 7/16"-14 Threaded Shank Counterbore - 1/2" Outside Diameter; 1/4" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $63.67 Our Price: $57.30 Savings: $6.37
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H716 Adjustable HSS 7/16"-14 Threaded Shank Counterbore - 7/16" Outside Diameter; 3/16" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $63.67 Our Price: $57.30 Savings: $6.37
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H62307 Adjustable HSS Counterbore - 3/4" Outside Diameter; 1/4" Inside Diameter; 2" Overall Length
Magnate H62307 Adjustable HSS Counterbore - 3/4" Outside Diameter; 1/4" Inside Diameter; 2" Overall Length
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $65.09 Our Price: $58.58 Savings: $6.51
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H62308 Adjustable HSS Counterbore - 3/4" Outside Diameter; 5/16" Inside Diameter; 2" Overall Length
Magnate H62308 Adjustable HSS Counterbore - 3/4" Outside Diameter; 5/16" Inside Diameter; 2" Overall Length
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $65.09 Our Price: $58.58 Savings: $6.51
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H62253 Adjustable HSS 7/16"-14 Threaded Shank Counterbore - 3/8" Outside Diameter; 3/16" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Left Rotation
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $66.11 Our Price: $59.50 Savings: $6.61
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H62254 Adjustable HSS 7/16"-14 Threaded Shank Counterbore - 1/2" Outside Diameter; 3/16" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Left Rotation
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $66.11 Our Price: $59.50 Savings: $6.61
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H62255 Adjustable HSS 7/16"-14 Threaded Shank Counterbore - 1/2" Outside Diameter; 7/32" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Left Rotation
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $66.11 Our Price: $59.50 Savings: $6.61
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H62256 Adjustable HSS 7/16"-14 Threaded Shank Counterbore - 1/2" Outside Diameter; 1/4" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Left Rotation
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $66.11 Our Price: $59.50 Savings: $6.61
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate H62257 Adjustable HSS 7/16"-14 Threaded Shank Countersink - 3/8" Outside Diameter; 3/16" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $68.14 Our Price: $61.33 Savings: $6.81
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate H62258 Adjustable HSS 7/16"-14 Threaded Shank Countersink - 1/2" Outside Diameter; 3/16" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $68.14 Our Price: $61.33 Savings: $6.81
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H62309 Adjustable HSS Counterbore - 7/8" Outside Diameter; 5/16" Inside Diameter; 2" Overall Length
Magnate H62309 Adjustable HSS Counterbore - 7/8" Outside Diameter; 5/16" Inside Diameter; 2" Overall Length
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $68.76 Our Price: $61.88 Savings: $6.88
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H62310 Adjustable HSS Counterbore - 7/8" Outside Diameter; 3/8" Inside Diameter; 2" Overall Length
Magnate H62310 Adjustable HSS Counterbore - 7/8" Outside Diameter; 3/8" Inside Diameter; 2" Overall Length
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $69.17 Our Price: $62.25 Savings: $6.92
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H62311 Adjustable HSS Counterbore - 7/8" Outside Diameter; 7/16" Inside Diameter; 2" Overall Length
Magnate H62311 Adjustable HSS Counterbore - 7/8" Outside Diameter; 7/16" Inside Diameter; 2" Overall Length
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $69.17 Our Price: $62.25 Savings: $6.92
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H62312 Adjustable HSS Counterbore - 1" Outside Diameter; 5/16" Inside Diameter; 2" Overall Length
Magnate H62312 Adjustable HSS Counterbore - 1" Outside Diameter; 5/16" Inside Diameter; 2" Overall Length
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $77.92 Our Price: $70.13 Savings: $7.79
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H62313 Adjustable HSS Counterbore - 1" Outside Diameter; 3/8" Inside Diameter; 2" Overall Length
Magnate H62313 Adjustable HSS Counterbore - 1" Outside Diameter; 3/8" Inside Diameter; 2" Overall Length
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $77.92 Our Price: $70.13 Savings: $7.79
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H62314 Adjustable HSS Counterbore - 1" Outside Diameter; 1/2" Inside Diameter; 2" Overall Length
Magnate H62314 Adjustable HSS Counterbore - 1" Outside Diameter; 1/2" Inside Diameter; 2" Overall Length
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $77.92 Our Price: $70.13 Savings: $7.79
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H62313-7/16 Adjustable HSS Counterbore - 1" Outside Diameter; 7/16" Inside Diameter; 2" Overall Length
Magnate H62313-7/16 Adjustable HSS Counterbore - 1" Outside Diameter; 7/16" Inside Diameter; 2" Overall Length
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $77.92 Our Price: $70.13 Savings: $7.79
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H62273 Adjustable HSS 1/2" Shank Diameter Counterbore - 5/8" Outside Diameter; 3/16" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Magnate H62273 Adjustable HSS 1/2" Shank Diameter Counterbore - 5/8" Outside Diameter; 3/16" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $81.39 Our Price: $73.25 Savings: $8.14
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H62274 Adjustable HSS 1/2" Shank Diameter Counterbore - 5/8" Outside Diameter; 1/4" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Magnate H62274 Adjustable HSS 1/2" Shank Diameter Counterbore - 5/8" Outside Diameter; 1/4" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $81.39 Our Price: $73.25 Savings: $8.14
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate C62292 Adjustable Carbide Tipped 1/2" Shank Diameter Counterbore - 3/8" Outside Diameter; 3/16" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $81.39 Our Price: $73.25 Savings: $8.14
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate C62293 Adjustable Carbide Tipped 1/2" Shank Diameter Counterbore - 1/2" Outside Diameter; 3/16" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $81.39 Our Price: $73.25 Savings: $8.14
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate C62297 Adjustable Carbide Tipped 1/2" Shank Diameter Countersink - 1/2" Outside Diameter; 3/16" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $81.39 Our Price: $73.25 Savings: $8.14
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H62276 Adjustable HSS 1/2" Shank Diameter Counterbore - 5/8" Outside Diameter; 5/16" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Magnate H62276 Adjustable HSS 1/2" Shank Diameter Counterbore - 5/8" Outside Diameter; 5/16" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $84.03 Our Price: $75.63 Savings: $8.40
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate C62312-1 Adjustable Carbide Tipped Counterbore - 1" Outside Diameter; 3/16" Inside Diameter; 2" Overall Length
Magnate C62312-1 Adjustable Carbide Tipped Counterbore - 1" Outside Diameter; 3/16" Inside Diameter; 2" Overall Length
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $86.48 Our Price: $77.83 Savings: $8.65
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H62277 Adjustable HSS 1/2" Shank Diameter Counterbore - 3/4" Outside Diameter; 3/16" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Magnate H62277 Adjustable HSS 1/2" Shank Diameter Counterbore - 3/4" Outside Diameter; 3/16" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $89.13 Our Price: $80.22 Savings: $8.91
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H62280 Adjustable HSS 1/2" Shank Diameter Counterbore - 3/4" Outside Diameter; 5/16" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Magnate H62280 Adjustable HSS 1/2" Shank Diameter Counterbore - 3/4" Outside Diameter; 5/16" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $89.13 Our Price: $80.22 Savings: $8.91
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H62281 Adjustable HSS 1/2" Shank Diameter Counterbore - 3/4" Outside Diameter; 3/8" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Magnate H62281 Adjustable HSS 1/2" Shank Diameter Counterbore - 3/4" Outside Diameter; 3/8" Inside Diameter; 2-1/2" Cutting length, 4-1/2" Overall Length, Right Rotation
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $89.13 Our Price: $80.22 Savings: $8.91
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate C62312 Adjustable Carbide Tipped Counterbore - 1" Outside Diameter; 5/16" Inside Diameter; 2" Overall Length
Magnate C62312 Adjustable Carbide Tipped Counterbore - 1" Outside Diameter; 5/16" Inside Diameter; 2" Overall Length
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $91.58 Our Price: $82.42 Savings: $9.16
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate CS1210L Carbide Tipped CounterSink Bit - 12mm Cutting Diameter; 10mm Shank Diameter; Left Rotation; 10.2mm Cutting Length, 55.5mm Overall Length, Compatible with Grass Zargen and ZBox Drawer Systems
Magnate CS1210L Carbide Tipped CounterSink Bit - 12mm Cutting Diameter; 10mm Shank Diameter; Left Rotation; 10.2mm Cutting Length, 55.5mm Overall Length, Compatible with Grass Zargen and ZBox Drawer Systems
This countersink bit is designed for use with Grass Zargen and ZBox drawer systems. Both Left-Hand and Right-Hand bits are required for Zargen and ZBox Pro1 installations. Compatible with selected Grass hinge systems.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $94.83 Our Price: $85.35 Savings: $9.48
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate CS1210R Carbide Tipped CounterSink Bit - 12mm Cutting Diameter; 10mm Shank Diameter; Right Rotation; 10.2mm Cutting Length, 55.5mm Overall Length, Compatible with Grass Zargen and ZBox Drawer Systems
Magnate CS1210R Carbide Tipped CounterSink Bit - 12mm Cutting Diameter; 10mm Shank Diameter; Right Rotation; 10.2mm Cutting Length, 55.5mm Overall Length, Compatible with Grass Zargen and ZBox Drawer Systems
This countersink bit is designed for use with Grass Zargen and ZBox drawer systems. Both Left-Hand and Right-Hand bits are required for Zargen and ZBox Pro1 installations. Compatible with selected Grass hinge systems.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $94.83 Our Price: $85.35 Savings: $9.48
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate C62312-2 Adjustable Carbide Tipped Counterbore - 1" Outside Diameter; 7/16" Inside Diameter; 2" Overall Length
Magnate C62312-2 Adjustable Carbide Tipped Counterbore - 1" Outside Diameter; 7/16" Inside Diameter; 2" Overall Length
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $96.26 Our Price: $86.63 Savings: $9.63
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate C62313 Adjustable Carbide Tipped Counterbore - 1" Outside Diameter; 3/8" Inside Diameter; 2" Overall Length
Magnate C62313 Adjustable Carbide Tipped Counterbore - 1" Outside Diameter; 3/8" Inside Diameter; 2" Overall Length
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $96.26 Our Price: $86.63 Savings: $9.63
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H62316 Adjustable HSS Counterbore - 1-1/4" Outside Diameter; 1/2" Inside Diameter; 2" Overall Length
Magnate H62316 Adjustable HSS Counterbore - 1-1/4" Outside Diameter; 1/2" Inside Diameter; 2" Overall Length
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $115.00 Our Price: $103.50 Savings: $11.50
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate H62318 Adjustable HSS Counterbore - 1-1/2" Outside Diameter; 1/2" Inside Diameter; 2" Overall Length
Magnate H62318 Adjustable HSS Counterbore - 1-1/2" Outside Diameter; 1/2" Inside Diameter; 2" Overall Length
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $123.76 Our Price: $111.38 Savings: $12.38
|
|
Qty
|
Add
|
|
|
|
|
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>
|
