www.magnate.net

Shop Online

Home > Amana® Tool > Amana® Router Bits > Grooving > Beading Router Bits 2 Flute Carbide Tipped

We found 5 results matching your criteria.

2 Flute Carbide Tipped

Quarter-round profiles are formed by this bit as it grooves, one on each side of a flat. The scale and depth of the beading profile distinguishes it from the roundover above. Used with a fence or edge guide, this beading bit can be used as an edge former.

Sort By:

Page of 1

Amana 56100 Beading Router Bit - 3/32" Radius; 3/16" Small Diameter; 3/8" Cutting Diameter; 5/16" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; 2 Flute Carbide Tipped

Amana 56100 Beading Router Bit - 3/32" Radius; 3/16" Small Diameter; 3/8" Cutting Diameter; 5/16" Cutting Height; 1/4" Shank Diameter; 2" Overall Length; 2 Flute Carbide Tipped

Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".