|
|
|
|
|
Skarpaz CP818 Replacement Chippers, 2-Wing - 8" Diameter; 1/8" Thickness; 5/8" Bore; Carbide Tipped, For Skarpaz Dado Set.
Skarpaz CP818 Replacement Chippers, 2-Wing - 8" Diameter; 1/8" Thickness; 5/8" Bore; Carbide Tipped, For Skarpaz Dado Set.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $44.37 Our Price: $40.34 Savings: $4.03
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz CP618 Replacement Chippers, 2-Wing - 6" Diameter; 1/8" Thickness; 5/8" Bore; Carbide Tipped, For Skarpaz Dado Set.
Skarpaz CP618 Replacement Chippers, 2-Wing - 6" Diameter; 1/8" Thickness; 5/8" Bore; Carbide Tipped, For Skarpaz Dado Set.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $45.93 Our Price: $41.75 Savings: $4.18
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz CP1016 Replacement Chippers, 2-Wing - 10" Diameter; 1/16" Thickness; 5/8" Bore; Carbide Tipped, For Skarpaz Dado Set.
Skarpaz CP1016 Replacement Chippers, 2-Wing - 10" Diameter; 1/16" Thickness; 5/8" Bore; Carbide Tipped, For Skarpaz Dado Set.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $54.49 Our Price: $49.54 Savings: $4.95
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz CP1018 Replacement Chippers, 2-Wing - 10" Diameter; 1/8" Thickness; 5/8" Bore; Carbide Tipped, For Skarpaz Dado Set.
Skarpaz CP1018 Replacement Chippers, 2-Wing - 10" Diameter; 1/8" Thickness; 5/8" Bore; Carbide Tipped, For Skarpaz Dado Set.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $54.49 Our Price: $49.54 Savings: $4.95
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz CP10181 Replacement Chippers, 2-Wing - 10" Diameter; 1/8" Thickness; 1" Bore; Carbide Tipped, For Skarpaz Dado Set.
Skarpaz CP10181 Replacement Chippers, 2-Wing - 10" Diameter; 1/8" Thickness; 1" Bore; Carbide Tipped, For Skarpaz Dado Set.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $54.49 Our Price: $49.54 Savings: $4.95
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Skarpaz EB1202422 Edge Banding Saw Blade - 120mm Diameter; 24 Tooth; 22mm Bore; 15ATB Grind; 2.2mm Plate; 3.2mm Kerf
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Skarpaz GP7A General Purpose Saw Blade - 7-1/4" Diameter; 24 Tooth; 5/8" Bore; 15ATB Grind; .085" Plate; .125" Kerf; For cutting hardwood and softwood; Carbide Tipped
Skarpaz GP7A General Purpose Saw Blade - 7-1/4" Diameter; 24 Tooth; 5/8" Bore; 15ATB Grind; .085" Plate; .125" Kerf; For cutting hardwood and softwood; Carbide Tipped
For cutting hardwood and softwood
This general-purpose blade is designed for both ripping and crosscutting, delivering reliable performance when higher feed rates are required.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $68.27 Our Price: $62.06 Savings: $6.21
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz CP10141 Replacement Chippers, 2-Wing - 10" Diameter; 1/4" Thickness; 1" Bore; Carbide Tipped, For Skarpaz Dado Set.
Skarpaz CP10141 Replacement Chippers, 2-Wing - 10" Diameter; 1/4" Thickness; 1" Bore; Carbide Tipped, For Skarpaz Dado Set.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $73.18 Our Price: $66.52 Savings: $6.66
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz CP814 Replacement Chippers, 2-Wing - 8" Diameter; 1/4" Thickness; 5/8" Bore; Carbide Tipped, For Skarpaz Dado Set.
Skarpaz CP814 Replacement Chippers, 2-Wing - 8" Diameter; 1/4" Thickness; 5/8" Bore; Carbide Tipped, For Skarpaz Dado Set.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $73.18 Our Price: $66.52 Savings: $6.66
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz GP1040A General Purpose Saw Blade - 10" Diameter; 40 Tooth; 5/8" Bore; 10ATB Grind; .085" Plate; .125" Kerf; For cutting hardwood and softwood; Carbide Tipped
Skarpaz GP1040A General Purpose Saw Blade - 10" Diameter; 40 Tooth; 5/8" Bore; 10ATB Grind; .085" Plate; .125" Kerf; For cutting hardwood and softwood; Carbide Tipped
For cutting hardwood and softwood
This general-purpose blade is designed for both ripping and crosscutting, delivering reliable performance when higher feed rates are required.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $75.21 Our Price: $68.37 Savings: $6.84
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Skarpaz SC740A Standard Cross Cut Saw Blade - 7-1/4" Diameter; 40 Tooth; 5/8" Bore; 10ATB Grind; .085" Plate; .125" Kerf; For cutting hardwood and softwood; Carbide Tipped
Skarpaz SC740A Standard Cross Cut Saw Blade - 7-1/4" Diameter; 40 Tooth; 5/8" Bore; 10ATB Grind; .085" Plate; .125" Kerf; For cutting hardwood and softwood; Carbide Tipped
For cutting hardwood and softwood
An ideal all-purpose blade for cabinetmakers. An Alternate Top Bevel (ATB) grind is recommended for most solid woods, while a Triple Chip Grind (TCG) is preferred for hardwoods, plywood, particle board, and other abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $76.66 Our Price: $69.69 Savings: $6.97
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Skarpaz HD1010 Rip Saw Blade - 10" Diameter; 10 Tooth; 5/8" Bore; 20ST Grind; .095" Plate; .145" Kerf; Carbide Tipped, Flat Top Grind
Skarpaz HD1010 Rip Saw Blade - 10" Diameter; 10 Tooth; 5/8" Bore; 20ST Grind; .095" Plate; .145" Kerf; Carbide Tipped, Flat Top Grind
This blade is designed for ripping both hardwoods and softwoods. It accommodates both hand-fed and power-fed operations and can be customized for gang ripping applications.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $77.22 Our Price: $70.20 Savings: $7.02
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz GP1040T General Purpose Saw Blade - 10" Diameter; 40 Tooth; 5/8" Bore; 10TCG Grind; .085" Plate; .125" Kerf; For cutting single sided laminate; hardwood; plywood; particleboard and MDF; Carbide Tipped
Skarpaz GP1040T General Purpose Saw Blade - 10" Diameter; 40 Tooth; 5/8" Bore; 10TCG Grind; .085" Plate; .125" Kerf; For cutting single sided laminate; hardwood; plywood; particleboard and MDF; Carbide Tipped
For cutting single sided laminate; hardwood; plywood; particleboard and MDF
This general-purpose blade is designed for both ripping and crosscutting, delivering reliable performance when higher feed rates are required.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $77.68 Our Price: $70.62 Savings: $7.06
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz CP1216 Replacement Chippers, 2-Wing - 12" Diameter; 1/16" Thickness; 1" Bore; Carbide Tipped, For Skarpaz Dado Set.
Skarpaz CP1216 Replacement Chippers, 2-Wing - 12" Diameter; 1/16" Thickness; 1" Bore; Carbide Tipped, For Skarpaz Dado Set.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $77.85 Our Price: $70.77 Savings: $7.08
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz CP1218 Replacement Chippers, 2-Wing - 12" Diameter; 1/8" Thickness; 1" Bore; Carbide Tipped, For Skarpaz Dado Set.
Skarpaz CP1218 Replacement Chippers, 2-Wing - 12" Diameter; 1/8" Thickness; 1" Bore; Carbide Tipped, For Skarpaz Dado Set.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $77.85 Our Price: $70.77 Savings: $7.08
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz SC740T Standard Cross Cut Saw Blade - 7-1/4" Diameter; 40 Tooth; 5/8" Bore; 10TCG Grind; .085" Plate; .125" Kerf; For cutting single sided laminate; hardwood; plywood; particleboard; MDF and other abrasive material; Carbide Tipped
Skarpaz SC740T Standard Cross Cut Saw Blade - 7-1/4" Diameter; 40 Tooth; 5/8" Bore; 10TCG Grind; .085" Plate; .125" Kerf; For cutting single sided laminate; hardwood; plywood; particleboard; MDF and other abrasive material; Carbide Tipped
For cutting single sided laminate; hardwood; plywood; particleboard; MDF and other abrasive material
An ideal all-purpose blade for cabinetmakers. An Alternate Top Bevel (ATB) grind is recommended for most solid woods, while a Triple Chip Grind (TCG) is preferred for hardwoods, plywood, particle board, and other abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $78.90 Our Price: $71.72 Savings: $7.18
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz R1024 Rip Saw Blade - 10" Diameter; 24 Tooth; 5/8" Bore; 20ST Grind; .085" Plate; .125" Kerf; Carbide Tipped, Flat Top Grind
Skarpaz R1024 Rip Saw Blade - 10" Diameter; 24 Tooth; 5/8" Bore; 20ST Grind; .085" Plate; .125" Kerf; Carbide Tipped, Flat Top Grind
This blade is designed for ripping both hardwoods and softwoods. It accommodates both hand-fed and power-fed operations and can be customized for gang ripping applications.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $79.45 Our Price: $72.23 Savings: $7.22
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Skarpaz G1024A-125 Glue Line Rip Saw Blade, Straight Line Rip - 10" Diameter; 24 Tooth; 5/8" Bore; 20ATB Grind; .085" Plate; .125" Kerf; Carbide Tipped
Skarpaz G1024A-125 Glue Line Rip Saw Blade, Straight Line Rip - 10" Diameter; 24 Tooth; 5/8" Bore; 20ATB Grind; .085" Plate; .125" Kerf; Carbide Tipped
This rip blade produces exceptionally clean cuts, making them ideal for applications requiring glue joints. For hardwoods and composite materials, a Triple Chip Grind (TCG) is recommended. For softer wood species, an Alternate Top Bevel (ATB) grind blade is recommended to provide optimal results.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $82.48 Our Price: $74.98 Savings: $7.50
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz CP1014 Replacement Chippers, 2-Wing - 10" Diameter; 1/4" Thickness; 5/8" Bore; Carbide Tipped, For Skarpaz Dado Set.
Skarpaz CP1014 Replacement Chippers, 2-Wing - 10" Diameter; 1/4" Thickness; 5/8" Bore; Carbide Tipped, For Skarpaz Dado Set.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $82.52 Our Price: $75.02 Savings: $7.50
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz R824 Rip Saw Blade - 8" Diameter; 24 Tooth; 5/8" Bore; 20ST Grind; .085" Plate; .125" Kerf; Carbide Tipped, Flat Top Grind
Skarpaz R824 Rip Saw Blade - 8" Diameter; 24 Tooth; 5/8" Bore; 20ST Grind; .085" Plate; .125" Kerf; Carbide Tipped, Flat Top Grind
This blade is designed for ripping both hardwoods and softwoods. It accommodates both hand-fed and power-fed operations and can be customized for gang ripping applications.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $82.80 Our Price: $75.28 Savings: $7.52
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Skarpaz BJ100 Biscuit Jointer Blade - 100mm Diameter; Bore; 6 Tooth; 4.0mm Kerf; 3.0mm Plate; Carbide Tipped
Skarpaz BJ100 Biscuit Jointer Blade - 100mm Diameter; Bore; 6 Tooth; 4.0mm Kerf; 3.0mm Plate; Carbide Tipped
This blade is compatible with most popular brands of plate joiner machines and features a chip-limiting design.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $83.38 Our Price: $75.80 Savings: $7.58
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Skarpaz U824 Ultra Thin Rip Saw Blade - 8" Diameter; 24 Tooth; 5/8" Bore; 20ATB Grind; .059" Plate; .090" Kerf; Carbide Tipped
Skarpaz U824 Ultra Thin Rip Saw Blade - 8" Diameter; 24 Tooth; 5/8" Bore; 20ATB Grind; .059" Plate; .090" Kerf; Carbide Tipped
This is designed for ripping with under-powered saws or molders. It features a thin kerf that reduces feed resistance and minimizes material waste. For best results, pair with saw blade stabilizers to enhance cutting accuracy and performance.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $83.94 Our Price: $76.31 Savings: $7.63
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Skarpaz CM1050 Combination/Planer Style Saw Blade - 10" Diameter; 50 Tooth; 5/8" Bore; 15CMB Grind; .095" Plate; .135" Kerf; Carbide Tipped
Skarpaz CM1050 Combination/Planer Style Saw Blade - 10" Diameter; 50 Tooth; 5/8" Bore; 15CMB Grind; .095" Plate; .135" Kerf; Carbide Tipped
This combination/planer blade is designed for efficient ripping and smooth cross cutting. It offers the most optimal balance when a single blade must perform both functions.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $85.06 Our Price: $77.32 Savings: $7.74
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz R924 Rip Saw Blade - 9" Diameter; 24 Tooth; 5/8" Bore; 20ST Grind; .085" Plate; .125" Kerf; Carbide Tipped, Flat Top Grind
Skarpaz R924 Rip Saw Blade - 9" Diameter; 24 Tooth; 5/8" Bore; 20ST Grind; .085" Plate; .125" Kerf; Carbide Tipped, Flat Top Grind
This blade is designed for ripping both hardwoods and softwoods. It accommodates both hand-fed and power-fed operations and can be customized for gang ripping applications.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $86.17 Our Price: $78.34 Savings: $7.83
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Skarpaz SR1024A Rip with Chip Guides Saw Blade - 10" Diameter; 24 Tooth; 5/8" Bore; 20ATB-S Grind; .085" Plate; .125" Kerf; Carbide Tipped
Skarpaz SR1024A Rip with Chip Guides Saw Blade - 10" Diameter; 24 Tooth; 5/8" Bore; 20ATB-S Grind; .085" Plate; .125" Kerf; Carbide Tipped
This blade is specifically designed for hand-fed operations. It features a unique shoulder design that helps minimize the risk of material kickback.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $86.17 Our Price: $78.34 Savings: $7.83
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Skarpaz PS840A Portable Miter/Table Saw Blade - 8-1/4" Diameter; 40 Tooth; 5/8" Bore; 10ATB Grind; .070" Plate; .095" Kerf; Carbide Tipped
Skarpaz PS840A Portable Miter/Table Saw Blade - 8-1/4" Diameter; 40 Tooth; 5/8" Bore; 10ATB Grind; .070" Plate; .095" Kerf; Carbide Tipped
To get the best performance from your saw, use blades with negative or neutral hook angles for miter cuts, and blades with a positive hook angle for most table saw work. For general cutting of hardwood and softwood, an Alternate Top Bevel (ATB) grind is recommended, while a Triple Chip Grind (TCG) is better suited for single-sided laminate, plywood, and MDF.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $86.71 Our Price: $78.83 Savings: $7.88
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz SC1060A Standard Cross Cut Saw Blade - 10" Diameter; 60 Tooth; 5/8" Bore; 10ATB Grind; .085" Plate; .125" Kerf; For cutting hardwood and softwood; Carbide Tipped
Skarpaz SC1060A Standard Cross Cut Saw Blade - 10" Diameter; 60 Tooth; 5/8" Bore; 10ATB Grind; .085" Plate; .125" Kerf; For cutting hardwood and softwood; Carbide Tipped
For cutting hardwood and softwood
An ideal all-purpose blade for cabinetmakers. An Alternate Top Bevel (ATB) grind is recommended for most solid woods, while a Triple Chip Grind (TCG) is preferred for hardwoods, plywood, particle board, and other abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $87.29 Our Price: $79.35 Savings: $7.94
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz HD1024 Rip Saw Blade - 10" Diameter; 24 Tooth; 5/8" Bore; 20ST Grind; .095" Plate; .145" Kerf; Carbide Tipped, Flat Top Grind
Skarpaz HD1024 Rip Saw Blade - 10" Diameter; 24 Tooth; 5/8" Bore; 20ST Grind; .095" Plate; .145" Kerf; Carbide Tipped, Flat Top Grind
This blade is designed for ripping both hardwoods and softwoods. It accommodates both hand-fed and power-fed operations and can be customized for gang ripping applications.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $88.41 Our Price: $80.37 Savings: $8.04
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz HD1212 Rip Saw Blade - 12" Diameter; 12 Tooth; 1" Bore; 20ST Grind; .110" Plate; .160" Kerf; Carbide Tipped, Flat Top Grind
Skarpaz HD1212 Rip Saw Blade - 12" Diameter; 12 Tooth; 1" Bore; 20ST Grind; .110" Plate; .160" Kerf; Carbide Tipped, Flat Top Grind
This blade is designed for ripping both hardwoods and softwoods. It accommodates both hand-fed and power-fed operations and can be customized for gang ripping applications.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $88.41 Our Price: $80.37 Savings: $8.04
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz SC1060T Standard Cross Cut Saw Blade - 10" Diameter; 60 Tooth; 5/8" Bore; 10TCG Grind; .085" Plate; .125" Kerf; For cutting single sided laminate; hardwood; plywood; particleboard; MDF and other abrasive material; Carbide Tipped
Skarpaz SC1060T Standard Cross Cut Saw Blade - 10" Diameter; 60 Tooth; 5/8" Bore; 10TCG Grind; .085" Plate; .125" Kerf; For cutting single sided laminate; hardwood; plywood; particleboard; MDF and other abrasive material; Carbide Tipped
For cutting single sided laminate; hardwood; plywood; particleboard; MDF and other abrasive material
An ideal all-purpose blade for cabinetmakers. An Alternate Top Bevel (ATB) grind is recommended for most solid woods, while a Triple Chip Grind (TCG) is preferred for hardwoods, plywood, particle board, and other abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $88.41 Our Price: $80.37 Savings: $8.04
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz GP840A General Purpose Saw Blade - 8" Diameter; 40 Tooth; 5/8" Bore; 10ATB Grind; .085" Plate; .125" Kerf; For cutting hardwood and softwood; Carbide Tipped
Skarpaz GP840A General Purpose Saw Blade - 8" Diameter; 40 Tooth; 5/8" Bore; 10ATB Grind; .085" Plate; .125" Kerf; For cutting hardwood and softwood; Carbide Tipped
For cutting hardwood and softwood
This general-purpose blade is designed for both ripping and crosscutting, delivering reliable performance when higher feed rates are required.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $90.42 Our Price: $82.20 Savings: $8.22
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz GP840T General Purpose Saw Blade - 8" Diameter; 40 Tooth; 5/8" Bore; 10TCG Grind; .085" Plate; .125" Kerf; For cutting single sided laminate; hardwood; plywood; particleboard and MDF; Carbide Tipped
Skarpaz GP840T General Purpose Saw Blade - 8" Diameter; 40 Tooth; 5/8" Bore; 10TCG Grind; .085" Plate; .125" Kerf; For cutting single sided laminate; hardwood; plywood; particleboard and MDF; Carbide Tipped
For cutting single sided laminate; hardwood; plywood; particleboard and MDF
This general-purpose blade is designed for both ripping and crosscutting, delivering reliable performance when higher feed rates are required.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $90.42 Our Price: $82.20 Savings: $8.22
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz U1040A Portable Miter/Table Saw Blade - 10" Diameter; 40 Tooth; 5/8" Bore; 10ATB Grind; .059" Plate; .090" Kerf; Carbide Tipped
Skarpaz U1040A Portable Miter/Table Saw Blade - 10" Diameter; 40 Tooth; 5/8" Bore; 10ATB Grind; .059" Plate; .090" Kerf; Carbide Tipped
To get the best performance from your saw, use blades with negative or neutral hook angles for miter cuts, and blades with a positive hook angle for most table saw work. For general cutting of hardwood and softwood, an Alternate Top Bevel (ATB) grind is recommended, while a Triple Chip Grind (TCG) is better suited for single-sided laminate, plywood, and MDF.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $92.89 Our Price: $84.45 Savings: $8.44
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz G1030T Glue Line Rip Saw Blade, Straight Line Rip - 10" Diameter; 30 Tooth; 5/8" Bore; 20TCG Grind; .095" Plate; .145" Kerf; Carbide Tipped
Skarpaz G1030T Glue Line Rip Saw Blade, Straight Line Rip - 10" Diameter; 30 Tooth; 5/8" Bore; 20TCG Grind; .095" Plate; .145" Kerf; Carbide Tipped
This rip blade produces exceptionally clean cuts, making them ideal for applications requiring glue joints. For hardwoods and composite materials, a Triple Chip Grind (TCG) is recommended. For softer wood species, an Alternate Top Bevel (ATB) grind blade is recommended to provide optimal results.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $94.57 Our Price: $85.97 Savings: $8.60
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz U1040T Portable Miter/Table Saw Blade - 10" Diameter; 40 Tooth; 5/8" Bore; 10TCG Grind; .059" Plate; .090" Kerf; Carbide Tipped
Skarpaz U1040T Portable Miter/Table Saw Blade - 10" Diameter; 40 Tooth; 5/8" Bore; 10TCG Grind; .059" Plate; .090" Kerf; Carbide Tipped
To get the best performance from your saw, use blades with negative or neutral hook angles for miter cuts, and blades with a positive hook angle for most table saw work. For general cutting of hardwood and softwood, an Alternate Top Bevel (ATB) grind is recommended, while a Triple Chip Grind (TCG) is better suited for single-sided laminate, plywood, and MDF.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $97.36 Our Price: $88.51 Savings: $8.85
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz BJ100-2 Biscuit Jointer Blade - 100mm Diameter; Bore; 6 Tooth; 4.0mm Kerf; 3.0mm Plate; has 4 countersunk pinholes for being compatible with Lamello Top 20SF machine; Carbide Tipped
Skarpaz BJ100-2 Biscuit Jointer Blade - 100mm Diameter; Bore; 6 Tooth; 4.0mm Kerf; 3.0mm Plate; has 4 countersunk pinholes for being compatible with Lamello Top 20SF machine; Carbide Tipped
This blade is compatible with most popular brands of plate joiner machines and features a chip-limiting design.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $100.71 Our Price: $91.55 Savings: $9.16
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz P860A Portable Miter/Table Saw Blade - 8-1/2" Diameter; 60 Tooth; 5/8" Bore; 0ATB Grind; .059" Plate; .090" Kerf; Carbide Tipped
Skarpaz P860A Portable Miter/Table Saw Blade - 8-1/2" Diameter; 60 Tooth; 5/8" Bore; 0ATB Grind; .059" Plate; .090" Kerf; Carbide Tipped
To get the best performance from your saw, use blades with negative or neutral hook angles for miter cuts, and blades with a positive hook angle for most table saw work. For general cutting of hardwood and softwood, an Alternate Top Bevel (ATB) grind is recommended, while a Triple Chip Grind (TCG) is better suited for single-sided laminate, plywood, and MDF.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $100.71 Our Price: $91.55 Savings: $9.16
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz P86NA Portable Miter/Table Saw Blade - 8-1/2" Diameter; 60 Tooth; 5/8" Bore; N5ATB Grind; .070" Plate; .095" Kerf; Carbide Tipped
Skarpaz P86NA Portable Miter/Table Saw Blade - 8-1/2" Diameter; 60 Tooth; 5/8" Bore; N5ATB Grind; .070" Plate; .095" Kerf; Carbide Tipped
To get the best performance from your saw, use blades with negative or neutral hook angles for miter cuts, and blades with a positive hook angle for most table saw work. For general cutting of hardwood and softwood, an Alternate Top Bevel (ATB) grind is recommended, while a Triple Chip Grind (TCG) is better suited for single-sided laminate, plywood, and MDF.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $100.71 Our Price: $91.55 Savings: $9.16
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz PS860A Portable Miter/Table Saw Blade - 8-1/4" Diameter; 60 Tooth; 5/8" Bore; 10ATB Grind; .070" Plate; .095" Kerf; Carbide Tipped
Skarpaz PS860A Portable Miter/Table Saw Blade - 8-1/4" Diameter; 60 Tooth; 5/8" Bore; 10ATB Grind; .070" Plate; .095" Kerf; Carbide Tipped
To get the best performance from your saw, use blades with negative or neutral hook angles for miter cuts, and blades with a positive hook angle for most table saw work. For general cutting of hardwood and softwood, an Alternate Top Bevel (ATB) grind is recommended, while a Triple Chip Grind (TCG) is better suited for single-sided laminate, plywood, and MDF.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $100.71 Our Price: $91.55 Savings: $9.16
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz PS861T Portable Miter/Table Saw Blade - 8-1/4" Diameter; 60 Tooth; 5/8" Bore; 10TCG Grind; .070" Plate; .095" Kerf; Carbide Tipped
Skarpaz PS861T Portable Miter/Table Saw Blade - 8-1/4" Diameter; 60 Tooth; 5/8" Bore; 10TCG Grind; .070" Plate; .095" Kerf; Carbide Tipped
To get the best performance from your saw, use blades with negative or neutral hook angles for miter cuts, and blades with a positive hook angle for most table saw work. For general cutting of hardwood and softwood, an Alternate Top Bevel (ATB) grind is recommended, while a Triple Chip Grind (TCG) is better suited for single-sided laminate, plywood, and MDF.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $100.71 Our Price: $91.55 Savings: $9.16
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Skarpaz LM1060A45 Low Melt Plastic/Solid Surface Saw Blade - 10" Diameter; 60 Tooth; 5/8" Bore; 10AT45 Grind; .085" Plate; .115" Kerf; Carbide Tipped
Skarpaz LM1060A45 Low Melt Plastic/Solid Surface Saw Blade - 10" Diameter; 60 Tooth; 5/8" Bore; 10AT45 Grind; .085" Plate; .115" Kerf; Carbide Tipped
This blade is designed for cutting acrylic, engraving stock, Lexan, PVC, polycarbonate, polyethylene, and rigid vinyl. It features a special low melt tooth style provides excellent cuts in wide variety of plastics. Durable LX carbide tips extend edge life and reduce the need for frequent sharpening.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $100.71 Our Price: $91.55 Savings: $9.16
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Precision Trim Saw Blades , Carbide Tipped: PT1081A
10ATB Grind; 10" Diameter; 80 Tooth; 5/8" Bore; .085" Plate; .125" Kerf;
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Skarpaz GR1040T-3 Gang Rip Saw Blade - 10" Diameter; 40 Tooth; 3" Bore; 15TCG Grind; .085" Plate; .125" Kerf; 3 pinholes; Carbide Tipped
Skarpaz GR1040T-3 Gang Rip Saw Blade - 10" Diameter; 40 Tooth; 3" Bore; 15TCG Grind; .085" Plate; .125" Kerf; 3 pinholes; Carbide Tipped
3 pinholes
This gang rip blade is designed for ripping of both softwoods and hardwoods. Be sure to confirm that the keyway dimensions are fully compatible with your machine's specifications.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $102.86 Our Price: $93.51 Savings: $9.35
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz GR1040T-318 Gang Rip Saw Blade - 10" Diameter; 40 Tooth; 3-1/8" Bore; 15TCG Grind; .085" Plate; .125" Kerf; Glue Line Gang Rip Blade; (2)1/4"x1/4keyways; Carbide Tipped
Skarpaz GR1040T-318 Gang Rip Saw Blade - 10" Diameter; 40 Tooth; 3-1/8" Bore; 15TCG Grind; .085" Plate; .125" Kerf; Glue Line Gang Rip Blade; (2)1/4"x1/4keyways; Carbide Tipped
Glue Line Gang Rip Blade with (2)1/4"x1/4 keyways
This gang rip blade is designed for ripping of both softwoods and hardwoods. Be sure to confirm that the keyway dimensions are fully compatible with your machine's specifications.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $102.86 Our Price: $93.51 Savings: $9.35
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz GR1040T-4 Gang Rip Saw Blade - 10" Diameter; 40 Tooth; 4-3/16" Bore; 15TCG Grind; .085" Plate; .125" Kerf; 3 pinholes; Carbide Tipped
Skarpaz GR1040T-4 Gang Rip Saw Blade - 10" Diameter; 40 Tooth; 4-3/16" Bore; 15TCG Grind; .085" Plate; .125" Kerf; 3 pinholes; Carbide Tipped
3 pinholes
This gang rip blade is designed for ripping of both softwoods and hardwoods. Be sure to confirm that the keyway dimensions are fully compatible with your machine's specifications.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $102.86 Our Price: $93.51 Savings: $9.35
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz R1224 Rip Saw Blade - 12" Diameter; 24 Tooth; 1" Bore; 20ST Grind; .085" Plate; .125" Kerf; Carbide Tipped, Flat Top Grind
Skarpaz R1224 Rip Saw Blade - 12" Diameter; 24 Tooth; 1" Bore; 20ST Grind; .085" Plate; .125" Kerf; Carbide Tipped, Flat Top Grind
This blade is designed for ripping both hardwoods and softwoods. It accommodates both hand-fed and power-fed operations and can be customized for gang ripping applications.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $103.52 Our Price: $94.11 Savings: $9.41
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Skarpaz U1024 Ultra Thin Rip Saw Blade - 10" Diameter; 24 Tooth; 5/8" Bore; 20ATB Grind; .059" Plate; .090" Kerf; Carbide Tipped
Skarpaz U1024 Ultra Thin Rip Saw Blade - 10" Diameter; 24 Tooth; 5/8" Bore; 20ATB Grind; .059" Plate; .090" Kerf; Carbide Tipped
This is designed for ripping with under-powered saws or molders. It features a thin kerf that reduces feed resistance and minimizes material waste. For best results, pair with saw blade stabilizers to enhance cutting accuracy and performance.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $104.08 Our Price: $94.62 Savings: $9.46
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Skarpaz RA1060 Radial Arm/Miter Saw Blade - 10" Diameter; 60 Tooth; 5/8" Bore; 0ATB Grind; .085" Plate; .125" Kerf; Carbide Tipped
Skarpaz RA1060 Radial Arm/Miter Saw Blade - 10" Diameter; 60 Tooth; 5/8" Bore; 0ATB Grind; .085" Plate; .125" Kerf; Carbide Tipped
This blade is designed for cutting hardwood, softwood, single-sided laminates, plywood, and particleboard. However, due to its ATB (Alternate Top Bevel) grind, it is not recommended for non-ferrous metals. The neutral hook angle helps prevent the saw from grabbing the material, ensuring smoother control during cutting.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $105.19 Our Price: $95.63 Savings: $9.56
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz RA860 Radial Arm/Miter Saw Blade - 8" Diameter; 60 Tooth; 5/8" Bore; 0ATB Grind; .085" Plate; .115" Kerf; Carbide Tipped
Skarpaz RA860 Radial Arm/Miter Saw Blade - 8" Diameter; 60 Tooth; 5/8" Bore; 0ATB Grind; .085" Plate; .115" Kerf; Carbide Tipped
This blade is designed for cutting hardwood, softwood, single-sided laminates, plywood, and particleboard. However, due to its ATB (Alternate Top Bevel) grind, it is not recommended for non-ferrous metals. The neutral hook angle helps prevent the saw from grabbing the material, ensuring smoother control during cutting.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $105.75 Our Price: $96.14 Savings: $9.61
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz SC860A Standard Cross Cut Saw Blade - 8" Diameter; 60 Tooth; 5/8" Bore; 10ATB Grind; .085" Plate; .125" Kerf; For cutting hardwood and softwood; Carbide Tipped
Skarpaz SC860A Standard Cross Cut Saw Blade - 8" Diameter; 60 Tooth; 5/8" Bore; 10ATB Grind; .085" Plate; .125" Kerf; For cutting hardwood and softwood; Carbide Tipped
For cutting hardwood and softwood
An ideal all-purpose blade for cabinetmakers. An Alternate Top Bevel (ATB) grind is recommended for most solid woods, while a Triple Chip Grind (TCG) is preferred for hardwoods, plywood, particle board, and other abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $105.75 Our Price: $96.14 Savings: $9.61
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz U860A Portable Miter/Table Saw Blade - 8" Diameter; 60 Tooth; 5/8" Bore; 5ATB Grind; .059" Plate; .090" Kerf; Carbide Tipped
Skarpaz U860A Portable Miter/Table Saw Blade - 8" Diameter; 60 Tooth; 5/8" Bore; 5ATB Grind; .059" Plate; .090" Kerf; Carbide Tipped
To get the best performance from your saw, use blades with negative or neutral hook angles for miter cuts, and blades with a positive hook angle for most table saw work. For general cutting of hardwood and softwood, an Alternate Top Bevel (ATB) grind is recommended, while a Triple Chip Grind (TCG) is better suited for single-sided laminate, plywood, and MDF.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $106.31 Our Price: $96.65 Savings: $9.66
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz U850-062 Ultra Thin Rip Saw Blade - 8" Diameter; 50 Tooth; 2-13/16" Bore; 12St2 Grind; .050" Plate; .062" Kerf; Carbide Tipped
Skarpaz U850-062 Ultra Thin Rip Saw Blade - 8" Diameter; 50 Tooth; 2-13/16" Bore; 12St2 Grind; .050" Plate; .062" Kerf; Carbide Tipped
This is designed for ripping with under-powered saws or molders. It features a thin kerf that reduces feed resistance and minimizes material waste. For best results, pair with saw blade stabilizers to enhance cutting accuracy and performance.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $106.31 Our Price: $96.65 Savings: $9.66
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz SC1060A-1 Standard Cross Cut Saw Blade - 10" Diameter; 60 Tooth; 1" Bore; 10ATB Grind; .085" Plate; .125" Kerf; For cutting hardwood and softwood; Carbide Tipped
Skarpaz SC1060A-1 Standard Cross Cut Saw Blade - 10" Diameter; 60 Tooth; 1" Bore; 10ATB Grind; .085" Plate; .125" Kerf; For cutting hardwood and softwood; Carbide Tipped
For cutting hardwood and softwood
An ideal all-purpose blade for cabinetmakers. An Alternate Top Bevel (ATB) grind is recommended for most solid woods, while a Triple Chip Grind (TCG) is preferred for hardwoods, plywood, particle board, and other abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $107.43 Our Price: $97.66 Savings: $9.77
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz U860T Portable Miter/Table Saw Blade - 8" Diameter; 60 Tooth; 5/8" Bore; 5TCG Grind; .059" Plate; .090" Kerf; Carbide Tipped
Skarpaz U860T Portable Miter/Table Saw Blade - 8" Diameter; 60 Tooth; 5/8" Bore; 5TCG Grind; .059" Plate; .090" Kerf; Carbide Tipped
To get the best performance from your saw, use blades with negative or neutral hook angles for miter cuts, and blades with a positive hook angle for most table saw work. For general cutting of hardwood and softwood, an Alternate Top Bevel (ATB) grind is recommended, while a Triple Chip Grind (TCG) is better suited for single-sided laminate, plywood, and MDF.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $107.43 Our Price: $97.66 Savings: $9.77
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz P1060A Portable Miter/Table Saw Blade - 10" Diameter; 60 Tooth; 5/8" Bore; 0ATB Grind; .059" Plate; .090" Kerf; Carbide Tipped
Skarpaz P1060A Portable Miter/Table Saw Blade - 10" Diameter; 60 Tooth; 5/8" Bore; 0ATB Grind; .059" Plate; .090" Kerf; Carbide Tipped
To get the best performance from your saw, use blades with negative or neutral hook angles for miter cuts, and blades with a positive hook angle for most table saw work. For general cutting of hardwood and softwood, an Alternate Top Bevel (ATB) grind is recommended, while a Triple Chip Grind (TCG) is better suited for single-sided laminate, plywood, and MDF.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $107.43 Our Price: $97.66 Savings: $9.77
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz U81250-062 Ultra Thin Rip Saw Blade - 8-1/2" Diameter; 50 Tooth; 2-13/16" Bore; 12St2 Grind; .050" Plate; .062" Kerf; Carbide Tipped
Skarpaz U81250-062 Ultra Thin Rip Saw Blade - 8-1/2" Diameter; 50 Tooth; 2-13/16" Bore; 12St2 Grind; .050" Plate; .062" Kerf; Carbide Tipped
This is designed for ripping with under-powered saws or molders. It features a thin kerf that reduces feed resistance and minimizes material waste. For best results, pair with saw blade stabilizers to enhance cutting accuracy and performance.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $107.43 Our Price: $97.66 Savings: $9.77
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz SC860T Standard Cross Cut Saw Blade - 8" Diameter; 60 Tooth; 5/8" Bore; 10TCG Grind; .085" Plate; .125" Kerf; For cutting single sided laminate; hardwood; plywood; particleboard; MDF and other abrasive material; Carbide Tipped
Skarpaz SC860T Standard Cross Cut Saw Blade - 8" Diameter; 60 Tooth; 5/8" Bore; 10TCG Grind; .085" Plate; .125" Kerf; For cutting single sided laminate; hardwood; plywood; particleboard; MDF and other abrasive material; Carbide Tipped
For cutting single sided laminate; hardwood; plywood; particleboard; MDF and other abrasive material
An ideal all-purpose blade for cabinetmakers. An Alternate Top Bevel (ATB) grind is recommended for most solid woods, while a Triple Chip Grind (TCG) is preferred for hardwoods, plywood, particle board, and other abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $107.99 Our Price: $98.17 Savings: $9.82
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz HD1224 Rip Saw Blade - 12" Diameter; 24 Tooth; 1" Bore; 20ST Grind; .095" Plate; .145" Kerf; Carbide Tipped, Flat Top Grind
Skarpaz HD1224 Rip Saw Blade - 12" Diameter; 24 Tooth; 1" Bore; 20ST Grind; .095" Plate; .145" Kerf; Carbide Tipped, Flat Top Grind
This blade is designed for ripping both hardwoods and softwoods. It accommodates both hand-fed and power-fed operations and can be customized for gang ripping applications.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $108.70 Our Price: $98.82 Savings: $9.88
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz GR1030 Gang Rip Saw Blade - 10" Diameter; 30 Tooth; 70mm Bore; 20ST Grind; .095" Plate; .165" Kerf; (2)20x10 keyways; Carbide Tipped
Skarpaz GR1030 Gang Rip Saw Blade - 10" Diameter; 30 Tooth; 70mm Bore; 20ST Grind; .095" Plate; .165" Kerf; (2)20x10 keyways; Carbide Tipped
(2)20x10 keyways
This gang rip blade is designed for ripping of both softwoods and hardwoods. Be sure to confirm that the keyway dimensions are fully compatible with your machine's specifications.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $108.88 Our Price: $98.98 Savings: $9.90
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz CP1214 Replacement Chippers, 2-Wing - 12" Diameter; 1/4" Thickness; 1" Bore; Carbide Tipped, For Skarpaz Dado Set.
Skarpaz CP1214 Replacement Chippers, 2-Wing - 12" Diameter; 1/4" Thickness; 1" Bore; Carbide Tipped, For Skarpaz Dado Set.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $108.98 Our Price: $99.08 Savings: $9.90
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz SC1060T-1 Standard Cross Cut Saw Blade - 10" Diameter; 60 Tooth; 1" Bore; 10TCG Grind; .085" Plate; .125" Kerf; For cutting single sided laminate; hardwood; plywood; particleboard; MDF and other abrasive material; Carbide Tipped
Skarpaz SC1060T-1 Standard Cross Cut Saw Blade - 10" Diameter; 60 Tooth; 1" Bore; 10TCG Grind; .085" Plate; .125" Kerf; For cutting single sided laminate; hardwood; plywood; particleboard; MDF and other abrasive material; Carbide Tipped
For cutting single sided laminate; hardwood; plywood; particleboard; MDF and other abrasive material
An ideal all-purpose blade for cabinetmakers. An Alternate Top Bevel (ATB) grind is recommended for most solid woods, while a Triple Chip Grind (TCG) is preferred for hardwoods, plywood, particle board, and other abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $109.66 Our Price: $99.69 Savings: $9.97
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Skarpaz EB1002020 Edge Banding Saw Blade - 100mm Diameter; 20 Tooth; 20mm Bore; 10ATB Grind; 2.2mm Plate; 3.2mm Kerf; Carbide Tipped
Skarpaz EB1002020 Edge Banding Saw Blade - 100mm Diameter; 20 Tooth; 20mm Bore; 10ATB Grind; 2.2mm Plate; 3.2mm Kerf; Carbide Tipped
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $110.80 Our Price: $100.72 Savings: $10.08
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz EB1102022 Edge Banding Saw Blade - 110mm Diameter; 20 Tooth; 22mm Bore; 10ATB Grind; 2.5mm Plate; 3.6mm Kerf; Carbide Tipped
Skarpaz EB1102022 Edge Banding Saw Blade - 110mm Diameter; 20 Tooth; 22mm Bore; 10ATB Grind; 2.5mm Plate; 3.6mm Kerf; Carbide Tipped
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $110.80 Our Price: $100.72 Savings: $10.08
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz EB1003030 Edge Banding Saw Blade - 100mm Diameter; 30 Tooth; 30mm Bore; 10ATB Grind; 1.8mm Plate; 2.4mm Kerf; Carbide Tipped
Skarpaz EB1003030 Edge Banding Saw Blade - 100mm Diameter; 30 Tooth; 30mm Bore; 10ATB Grind; 1.8mm Plate; 2.4mm Kerf; Carbide Tipped
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $110.80 Our Price: $100.72 Savings: $10.08
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz EB1102032 Edge Banding Saw Blade - 110mm Diameter; 20 Tooth; 32mm Bore; 10ATB Grind; 2.5mm Plate; 3.6mm Kerf; Carbide Tipped
Skarpaz EB1102032 Edge Banding Saw Blade - 110mm Diameter; 20 Tooth; 32mm Bore; 10ATB Grind; 2.5mm Plate; 3.6mm Kerf; Carbide Tipped
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $110.80 Our Price: $100.72 Savings: $10.08
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz SC960A Standard Cross Cut Saw Blade - 9" Diameter; 60 Tooth; 5/8" Bore; 5ATB Grind; .085" Plate; .125" Kerf; For cutting hardwood and softwood; Carbide Tipped
Skarpaz SC960A Standard Cross Cut Saw Blade - 9" Diameter; 60 Tooth; 5/8" Bore; 5ATB Grind; .085" Plate; .125" Kerf; For cutting hardwood and softwood; Carbide Tipped
For cutting hardwood and softwood
An ideal all-purpose blade for cabinetmakers. An Alternate Top Bevel (ATB) grind is recommended for most solid woods, while a Triple Chip Grind (TCG) is preferred for hardwoods, plywood, particle board, and other abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $111.34 Our Price: $101.22 Savings: $10.12
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz R1230 Rip Saw Blade - 12" Diameter; 30 Tooth; 1" Bore; 20ST Grind; .085" Plate; .125" Kerf; Carbide Tipped, Flat Top Grind
Skarpaz R1230 Rip Saw Blade - 12" Diameter; 30 Tooth; 1" Bore; 20ST Grind; .085" Plate; .125" Kerf; Carbide Tipped, Flat Top Grind
This blade is designed for ripping both hardwoods and softwoods. It accommodates both hand-fed and power-fed operations and can be customized for gang ripping applications.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $112.20 Our Price: $102.00 Savings: $10.20
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz GP1240A General Purpose Saw Blade - 12" Diameter; 40 Tooth; 1" Bore; 10ATB Grind; .095" Plate; .135" Kerf; For cutting hardwood and softwood; Carbide Tipped
Skarpaz GP1240A General Purpose Saw Blade - 12" Diameter; 40 Tooth; 1" Bore; 10ATB Grind; .095" Plate; .135" Kerf; For cutting hardwood and softwood; Carbide Tipped
For cutting hardwood and softwood
This general-purpose blade is designed for both ripping and crosscutting, delivering reliable performance when higher feed rates are required.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $112.32 Our Price: $102.11 Savings: $10.21
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz GP1240T General Purpose Saw Blade - 12" Diameter; 40 Tooth; 1" Bore; 10TCG Grind; .095" Plate; .135" Kerf; For cutting single sided laminate; hardwood; plywood; particleboard and MDF; Carbide Tipped
Skarpaz GP1240T General Purpose Saw Blade - 12" Diameter; 40 Tooth; 1" Bore; 10TCG Grind; .095" Plate; .135" Kerf; For cutting single sided laminate; hardwood; plywood; particleboard and MDF; Carbide Tipped
For cutting single sided laminate; hardwood; plywood; particleboard and MDF
This general-purpose blade is designed for both ripping and crosscutting, delivering reliable performance when higher feed rates are required.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $112.32 Our Price: $102.11 Savings: $10.21
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz EB1202032 Edge Banding Saw Blade - 120mm Diameter; 20 Tooth; 32mm Bore; 10ATB Grind; 2.2mm Plate; 3.2mm Kerf; Carbide Tipped
Skarpaz EB1202032 Edge Banding Saw Blade - 120mm Diameter; 20 Tooth; 32mm Bore; 10ATB Grind; 2.2mm Plate; 3.2mm Kerf; Carbide Tipped
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $114.70 Our Price: $104.28 Savings: $10.42
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz R1236 Rip Saw Blade - 12" Diameter; 36 Tooth; 1" Bore; 20ST Grind; .085" Plate; .125" Kerf; Carbide Tipped, Flat Top Grind
Skarpaz R1236 Rip Saw Blade - 12" Diameter; 36 Tooth; 1" Bore; 20ST Grind; .085" Plate; .125" Kerf; Carbide Tipped, Flat Top Grind
This blade is designed for ripping both hardwoods and softwoods. It accommodates both hand-fed and power-fed operations and can be customized for gang ripping applications.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $115.26 Our Price: $104.78 Savings: $10.48
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz U1060A Portable Miter/Table Saw Blade - 10" Diameter; 60 Tooth; 5/8" Bore; 10ATB Grind; .059" Plate; .090" Kerf; Carbide Tipped
Skarpaz U1060A Portable Miter/Table Saw Blade - 10" Diameter; 60 Tooth; 5/8" Bore; 10ATB Grind; .059" Plate; .090" Kerf; Carbide Tipped
To get the best performance from your saw, use blades with negative or neutral hook angles for miter cuts, and blades with a positive hook angle for most table saw work. For general cutting of hardwood and softwood, an Alternate Top Bevel (ATB) grind is recommended, while a Triple Chip Grind (TCG) is better suited for single-sided laminate, plywood, and MDF.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $115.26 Our Price: $104.78 Savings: $10.48
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz U1060T Portable Miter/Table Saw Blade - 10" Diameter; 60 Tooth; 5/8" Bore; 10TCG Grind; .059" Plate; .090" Kerf; Carbide Tipped
Skarpaz U1060T Portable Miter/Table Saw Blade - 10" Diameter; 60 Tooth; 5/8" Bore; 10TCG Grind; .059" Plate; .090" Kerf; Carbide Tipped
To get the best performance from your saw, use blades with negative or neutral hook angles for miter cuts, and blades with a positive hook angle for most table saw work. For general cutting of hardwood and softwood, an Alternate Top Bevel (ATB) grind is recommended, while a Triple Chip Grind (TCG) is better suited for single-sided laminate, plywood, and MDF.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $116.38 Our Price: $105.80 Savings: $10.58
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz U1224 Ultra Thin Rip Saw Blade - 12" Diameter; 24 Tooth; 1" Bore; 20ST Grind; .060" Plate; .090" Kerf; Carbide Tipped
Skarpaz U1224 Ultra Thin Rip Saw Blade - 12" Diameter; 24 Tooth; 1" Bore; 20ST Grind; .060" Plate; .090" Kerf; Carbide Tipped
This is designed for ripping with under-powered saws or molders. It features a thin kerf that reduces feed resistance and minimizes material waste. For best results, pair with saw blade stabilizers to enhance cutting accuracy and performance.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $118.61 Our Price: $107.83 Savings: $10.78
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Skarpaz EB1203640P Edge Banding Saw Blade - 120mm Diameter; 36 Tooth; 40mm Bore; 10ATB Grind; 2.8mm Plate; 3.6mm Kerf
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz GP1248A General Purpose Saw Blade - 12" Diameter; 48 Tooth; 1" Bore; 10ATB Grind; .095" Plate; .135" Kerf; For cutting hardwood and softwood; Carbide Tipped
Skarpaz GP1248A General Purpose Saw Blade - 12" Diameter; 48 Tooth; 1" Bore; 10ATB Grind; .095" Plate; .135" Kerf; For cutting hardwood and softwood; Carbide Tipped
For cutting hardwood and softwood
This general-purpose blade is designed for both ripping and crosscutting, delivering reliable performance when higher feed rates are required.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $120.86 Our Price: $109.88 Savings: $10.98
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz HD1236 Rip Saw Blade - 12" Diameter; 36 Tooth; 1" Bore; 20ST Grind; .095" Plate; .145" Kerf; Carbide Tipped, Flat Top Grind
Skarpaz HD1236 Rip Saw Blade - 12" Diameter; 36 Tooth; 1" Bore; 20ST Grind; .095" Plate; .145" Kerf; Carbide Tipped, Flat Top Grind
This blade is designed for ripping both hardwoods and softwoods. It accommodates both hand-fed and power-fed operations and can be customized for gang ripping applications.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $121.98 Our Price: $110.89 Savings: $11.09
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz SR1224A-145 Rip with Chip Guides Saw Blade - 12" Diameter; 24 Tooth; 1" Bore; 20ATB-S Grind; .095" Plate; .145" Kerf; Carbide Tipped
Skarpaz SR1224A-145 Rip with Chip Guides Saw Blade - 12" Diameter; 24 Tooth; 1" Bore; 20ATB-S Grind; .095" Plate; .145" Kerf; Carbide Tipped
This blade is specifically designed for hand-fed operations. It features a unique shoulder design that helps minimize the risk of material kickback.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $121.98 Our Price: $110.89 Savings: $11.09
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz U2660AR Portable Miter/Table Saw Blade - 260mm Diameter; 60 Tooth; 30mm Bore; N2ATB+R Grind; 1.8mm Plate; 2.5mm Kerf; Compatible with FesTool Kapex Miter saw.; Carbide Tipped
Skarpaz U2660AR Portable Miter/Table Saw Blade - 260mm Diameter; 60 Tooth; 30mm Bore; N2ATB+R Grind; 1.8mm Plate; 2.5mm Kerf; Compatible with FesTool Kapex Miter saw.; Carbide Tipped
To get the best performance from your saw, use blades with negative or neutral hook angles for miter cuts, and blades with a positive hook angle for most table saw work. For general cutting of hardwood and softwood, an Alternate Top Bevel (ATB) grind is recommended, while a Triple Chip Grind (TCG) is better suited for single-sided laminate, plywood, and MDF.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $123.10 Our Price: $111.91 Savings: $11.19
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz GR1224-318 Gang Rip Saw Blade - 12" Diameter; 24 Tooth; 3-1/8" Bore; 20TCG Grind; .095" Plate; .135" Kerf; Carbide Tipped
Skarpaz GR1224-318 Gang Rip Saw Blade - 12" Diameter; 24 Tooth; 3-1/8" Bore; 20TCG Grind; .095" Plate; .135" Kerf; Carbide Tipped
This gang rip blade is designed for ripping of both softwoods and hardwoods. Be sure to confirm that the keyway dimensions are fully compatible with your machine's specifications.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $123.10 Our Price: $111.91 Savings: $11.19
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Skarpaz R3030 Rip Saw Blade - 300mm Diameter; 30 Tooth; 30mm Bore; 20ST Grind; 2.2mm Plate; 3.2mm Kerf; Come with universal pinholes; Carbide Tipped, Flat Top Grind
Skarpaz R3030 Rip Saw Blade - 300mm Diameter; 30 Tooth; 30mm Bore; 20ST Grind; 2.2mm Plate; 3.2mm Kerf; Come with universal pinholes; Carbide Tipped, Flat Top Grind
has universal pinholes
This blade is designed for ripping both hardwoods and softwoods. It accommodates both hand-fed and power-fed operations and can be customized for gang ripping applications.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $124.44 Our Price: $113.12 Savings: $11.32
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz GR1224-125 Gang Rip Saw Blade - 12" Diameter; 24 Tooth; 70mm Bore; 20ST Grind; .085" Plate; .125" Kerf; (2)20x10 keyways; Carbide Tipped
Skarpaz GR1224-125 Gang Rip Saw Blade - 12" Diameter; 24 Tooth; 70mm Bore; 20ST Grind; .085" Plate; .125" Kerf; (2)20x10 keyways; Carbide Tipped
(2)20x10 keyways
This gang rip blade is designed for ripping of both softwoods and hardwoods. Be sure to confirm that the keyway dimensions are fully compatible with your machine's specifications.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $125.11 Our Price: $113.74 Savings: $11.37
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz R1224-134 Gang Rip Saw Blade - 12" Diameter; 24 Tooth; 1-3/4" Bore; 20ST Grind; .085" Plate; .125" Kerf; Carbide Tipped
Skarpaz R1224-134 Gang Rip Saw Blade - 12" Diameter; 24 Tooth; 1-3/4" Bore; 20ST Grind; .085" Plate; .125" Kerf; Carbide Tipped
This gang rip blade is designed for ripping of both softwoods and hardwoods. Be sure to confirm that the keyway dimensions are fully compatible with your machine's specifications.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $125.11 Our Price: $113.74 Savings: $11.37
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Skarpaz PT1085A Precision Trim Saw Blades - 10" Diameter; 80 Tooth; 5/8" Bore; 5ATB Grind; .085" Plate; .125" Kerf; For cutting solid wood; Carbide Tipped
Skarpaz PT1085A Precision Trim Saw Blades - 10" Diameter; 80 Tooth; 5/8" Bore; 5ATB Grind; .085" Plate; .125" Kerf; For cutting solid wood; Carbide Tipped
Finer cutting than the Standard Cross Cut, these blades are ideal for thinner sheets of material. Use ATB for solid wood, Use TCG for chipboard, plywood, particleboard & other abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $125.89 Our Price: $114.45 Savings: $11.44
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz RA1080 Radial Arm/Miter Saw Blade - 10" Diameter; 80 Tooth; 5/8" Bore; 0ATB Grind; .085" Plate; .125" Kerf; Carbide Tipped
Skarpaz RA1080 Radial Arm/Miter Saw Blade - 10" Diameter; 80 Tooth; 5/8" Bore; 0ATB Grind; .085" Plate; .125" Kerf; Carbide Tipped
This blade is designed for cutting hardwood, softwood, single-sided laminates, plywood, and particleboard. However, due to its ATB (Alternate Top Bevel) grind, it is not recommended for non-ferrous metals. The neutral hook angle helps prevent the saw from grabbing the material, ensuring smoother control during cutting.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $125.89 Our Price: $114.45 Savings: $11.44
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz P124NA Portable Miter/Table Saw Blade - 12" Diameter; 40 Tooth; 1" Bore; N5ATB Grind; .085" Plate; .115" Kerf; Carbide Tipped
Skarpaz P124NA Portable Miter/Table Saw Blade - 12" Diameter; 40 Tooth; 1" Bore; N5ATB Grind; .085" Plate; .115" Kerf; Carbide Tipped
To get the best performance from your saw, use blades with negative or neutral hook angles for miter cuts, and blades with a positive hook angle for most table saw work. For general cutting of hardwood and softwood, an Alternate Top Bevel (ATB) grind is recommended, while a Triple Chip Grind (TCG) is better suited for single-sided laminate, plywood, and MDF.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $126.47 Our Price: $114.97 Savings: $11.50
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz GR1224-134 Gang Rip Saw Blade - 12" Diameter; 24 Tooth; 1-3/4" Bore; 20ST Grind; .095" Plate; .145" Kerf; Carbide Tipped
Skarpaz GR1224-134 Gang Rip Saw Blade - 12" Diameter; 24 Tooth; 1-3/4" Bore; 20ST Grind; .095" Plate; .145" Kerf; Carbide Tipped
This gang rip blade is designed for ripping of both softwoods and hardwoods. Be sure to confirm that the keyway dimensions are fully compatible with your machine's specifications.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $129.90 Our Price: $118.09 Savings: $11.81
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz GR1224-145 Gang Rip Saw Blade - 12" Diameter; 24 Tooth; 70mm Bore; 20ST Grind; .095" Plate; .145" Kerf; (2)20x10 keyways; Carbide Tipped
Skarpaz GR1224-145 Gang Rip Saw Blade - 12" Diameter; 24 Tooth; 70mm Bore; 20ST Grind; .095" Plate; .145" Kerf; (2)20x10 keyways; Carbide Tipped
(2)20x10 keyways
This gang rip blade is designed for ripping of both softwoods and hardwoods. Be sure to confirm that the keyway dimensions are fully compatible with your machine's specifications.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $129.90 Our Price: $118.09 Savings: $11.81
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz GR1236 Gang Rip Saw Blade - 12" Diameter; 36 Tooth; 3-1/8" Bore; 20ST Grind; .095" Plate; .135" Kerf; Carbide Tipped
Skarpaz GR1236 Gang Rip Saw Blade - 12" Diameter; 36 Tooth; 3-1/8" Bore; 20ST Grind; .095" Plate; .135" Kerf; Carbide Tipped
This gang rip blade is designed for ripping of both softwoods and hardwoods. Be sure to confirm that the keyway dimensions are fully compatible with your machine's specifications.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $130.10 Our Price: $118.28 Savings: $11.82
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz PT1085T Precision Trim Saw Blades - 10" Diameter; 80 Tooth; 5/8" Bore; 5TCG Grind; .085" Plate; .125" Kerf; For cutting chipboard; plywood; particle board and other abrasive materials.; Carbide Tipped
Skarpaz PT1085T Precision Trim Saw Blades - 10" Diameter; 80 Tooth; 5/8" Bore; 5TCG Grind; .085" Plate; .125" Kerf; For cutting chipboard; plywood; particle board and other abrasive materials.; Carbide Tipped
Finer cutting than the Standard Cross Cut, these blades are ideal for thinner sheets of material. Use ATB for solid wood, Use TCG for chipboard, plywood, particleboard & other abrasive materials.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $132.05 Our Price: $120.05 Savings: $12.00
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Skarpaz LR860 Laminates & Veneer Saw Blade - 8" Diameter; 60 Tooth; 5/8" Bore; .085" Plate; .115" Kerf; Carbide Tipped, N5LRCR Grind.
Skarpaz LR860 Laminates & Veneer Saw Blade - 8" Diameter; 60 Tooth; 5/8" Bore; .085" Plate; .115" Kerf; Carbide Tipped, N5LRCR Grind.
This blade is designed to deliver chip-free cuts on single-sided, double-sided laminates, plywood and fine veneers without a scoring saw. A negative hook angle and high ATB design, combined with durable Skarpaz LXT carbide, ensure long-lasting precision.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $133.73 Our Price: $121.57 Savings: $12.16
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz HP1224 Rip Saw Blade - 12" Diameter; 24 Tooth; 1" Bore; 20ST Grind; .110" Plate; .160" Kerf; Carbide Tipped, Flat Top Grind
Skarpaz HP1224 Rip Saw Blade - 12" Diameter; 24 Tooth; 1" Bore; 20ST Grind; .110" Plate; .160" Kerf; Carbide Tipped, Flat Top Grind
This blade is designed for ripping both hardwoods and softwoods. It accommodates both hand-fed and power-fed operations and can be customized for gang ripping applications.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $133.79 Our Price: $121.63 Savings: $12.16
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz G1236T-160 Glue Line Rip Saw Blade, Straight Line Rip - 12" Diameter; 36 Tooth; 1" Bore; 20TCG Grind; .110" Plate; .160" Kerf; Carbide Tipped
Skarpaz G1236T-160 Glue Line Rip Saw Blade, Straight Line Rip - 12" Diameter; 36 Tooth; 1" Bore; 20TCG Grind; .110" Plate; .160" Kerf; Carbide Tipped
This rip blade produces exceptionally clean cuts, making them ideal for applications requiring glue joints. For hardwoods and composite materials, a Triple Chip Grind (TCG) is recommended. For softer wood species, an Alternate Top Bevel (ATB) grind blade is recommended to provide optimal results.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $135.23 Our Price: $122.94 Savings: $12.29
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz G1230T Glue Line Rip Saw Blade, Straight Line Rip - 12" Diameter; 30 Tooth; 1" Bore; 20TCG Grind; .110" Plate; .160" Kerf; Carbide Tipped
Skarpaz G1230T Glue Line Rip Saw Blade, Straight Line Rip - 12" Diameter; 30 Tooth; 1" Bore; 20TCG Grind; .110" Plate; .160" Kerf; Carbide Tipped
This rip blade produces exceptionally clean cuts, making them ideal for applications requiring glue joints. For hardwoods and composite materials, a Triple Chip Grind (TCG) is recommended. For softer wood species, an Alternate Top Bevel (ATB) grind blade is recommended to provide optimal results.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $135.42 Our Price: $123.11 Savings: $12.31
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz RA980 Radial Arm/Miter Saw Blade - 9" Diameter; 80 Tooth; 5/8" Bore; 0ATB Grind; .085" Plate; .115" Kerf; Carbide Tipped
Skarpaz RA980 Radial Arm/Miter Saw Blade - 9" Diameter; 80 Tooth; 5/8" Bore; 0ATB Grind; .085" Plate; .115" Kerf; Carbide Tipped
This blade is designed for cutting hardwood, softwood, single-sided laminates, plywood, and particleboard. However, due to its ATB (Alternate Top Bevel) grind, it is not recommended for non-ferrous metals. The neutral hook angle helps prevent the saw from grabbing the material, ensuring smoother control during cutting.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $136.72 Our Price: $124.29 Savings: $12.43
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz EB1152430 Edge Banding Saw Blade - 110mm Diameter; 24 Tooth; 30mm Bore; 15ATB Grind; 1.6mm Plate; 2.6mm Kerf; Carbide Tipped
Skarpaz EB1152430 Edge Banding Saw Blade - 110mm Diameter; 24 Tooth; 30mm Bore; 15ATB Grind; 1.6mm Plate; 2.6mm Kerf; Carbide Tipped
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $138.77 Our Price: $126.15 Savings: $12.62
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz GR1228 Gang Rip Saw Blade - 12" Diameter; 28 Tooth; 80mm Bore; 20ST Grind; .110" Plate; .160" Kerf; (2)20x5+6 pinholes; Carbide Tipped
Skarpaz GR1228 Gang Rip Saw Blade - 12" Diameter; 28 Tooth; 80mm Bore; 20ST Grind; .110" Plate; .160" Kerf; (2)20x5+6 pinholes; Carbide Tipped
(2)20x5+6 pinholes
This gang rip blade is designed for ripping of both softwoods and hardwoods. Be sure to confirm that the keyway dimensions are fully compatible with your machine's specifications.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $141.29 Our Price: $128.45 Savings: $12.84
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz GR1236T-125 Gang Rip Saw Blade - 12" Diameter; 36 Tooth; 3-1/8" Bore; 20TCG Grind; .085" Plate; .125" Kerf; Glue Line Gang Rip Blade; (2)1/4"x1/4keyways; Carbide Tipped
Skarpaz GR1236T-125 Gang Rip Saw Blade - 12" Diameter; 36 Tooth; 3-1/8" Bore; 20TCG Grind; .085" Plate; .125" Kerf; Glue Line Gang Rip Blade; (2)1/4"x1/4keyways; Carbide Tipped
Glue Line Gang Rip Blade with (2)1/4"x1/4keyways
This gang rip blade is designed for ripping of both softwoods and hardwoods. Be sure to confirm that the keyway dimensions are fully compatible with your machine's specifications.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $141.29 Our Price: $128.45 Savings: $12.84
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz G1236T-170 Glue Line Rip Saw Blade, Straight Line Rip - 12" Diameter; 36 Tooth; 1" Bore; 20TCG Grind; .120" Plate; .170" Kerf; Carbide Tipped
Skarpaz G1236T-170 Glue Line Rip Saw Blade, Straight Line Rip - 12" Diameter; 36 Tooth; 1" Bore; 20TCG Grind; .120" Plate; .170" Kerf; Carbide Tipped
This rip blade produces exceptionally clean cuts, making them ideal for applications requiring glue joints. For hardwoods and composite materials, a Triple Chip Grind (TCG) is recommended. For softer wood species, an Alternate Top Bevel (ATB) grind blade is recommended to provide optimal results.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $142.07 Our Price: $129.15 Savings: $12.92
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Skarpaz G3036T-30 Glue Line Rip Saw Blade, Straight Line Rip - 300mm Diameter; 36 Tooth; 30mm Bore; 20TCG Grind; 2.8mm Plate; 4.0mm Kerf; Come with universal pinholes; Carbide Tipped
Skarpaz G3036T-30 Glue Line Rip Saw Blade, Straight Line Rip - 300mm Diameter; 36 Tooth; 30mm Bore; 20TCG Grind; 2.8mm Plate; 4.0mm Kerf; Come with universal pinholes; Carbide Tipped
have universal pinholes.
This rip blade produces exceptionally clean cuts, making them ideal for applications requiring glue joints. For hardwoods and composite materials, a Triple Chip Grind (TCG) is recommended. For softer wood species, an Alternate Top Bevel (ATB) grind blade is recommended to provide optimal results.
Please note: Product images are for illustrative purposes and may vary from the actual item.
|
|
List Price: $142.34 Our Price: $129.40 Savings: $12.94
|
|
Qty
|
Add
|
|
|
|
|
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>
|
