|
|
|
|
|
Carving Pod Bits, M2 High Speed Steel: 2771
Left Hand Rotation; 3/4" Cutting Length; 1/4" Shank Diameter; 1/8" Cutting Diameter;
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2774 Carving Pod Bits - Left Hand Rotation; 1" Cutting Length; 1/4" Shank Diameter; 3/16" Cutting Diameter
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2776 Carving Pod Bits - Left Hand Rotation; 1" Cutting Length; 1/4" Shank Diameter; 1/4" Cutting Diameter
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Carving Pod Bits, M2 High Speed Steel: 2751
Right Hand Rotation; 3/4" Cutting Length; 1/4" Shank Diameter; 1/8" Cutting Diameter;
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2754 Carving Pod Bits - Right Hand Rotation; 1" Cutting Length; 1/4" Shank Diameter; 3/16" Cutting Diameter
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2756 Carving Pod Bits - Right Hand Rotation; 1" Cutting Length; 1/4" Shank Diameter; 1/4" Cutting Diameter
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2876 Carving Rougher Bit - 2 Flute, M2 High Speed Steel - Left Hand Rotation; 3/4" Cutting Diameter; 1-3/16" Cutting Length; 2-1/2" Overall Length; 1/4" Shank Diameter
This carving rougher bit is designed to be used on a multiple carving machine.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Carving Pod Bits, M2 High Speed Steel: 2778
Left Hand Rotation; 1" Cutting Length; 1/4" Shank Diameter; 3/8" Cutting Diameter;
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Carving Pod Bits, M2 High Speed Steel: 2758
Right Hand Rotation; 1" Cutting Length; 1/4" Shank Diameter; 3/8" Cutting Diameter;
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1970 Veining/Liner Bit for Carving Machine - 1/16" Tip; 20 Degree; 1/2" Cutting Height; 2" Overall Length; 1/4" Shank Diameter, 1-Flute Solid Carbide
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $32.94 Our Price: $26.35 Savings: $6.59
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2846 Carving Rougher Bit - 2 Flute, M2 High Speed Steel - Right Hand Rotation; 3/4" Cutting Diameter; 1-3/16" Cutting Length; 2-1/2" Overall Length; 1/4" Shank Diameter
This carving rougher bit is designed to be used on a multiple carving machine.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate 1971 Veining/Liner Bit for Carving Machine - 1/16" Tip; 20 Degree; 1/2" Cutting Height; 2" Overall Length; Left Hand Rotation; 1/4" Shank Diameter, 1-Flute Solid Carbide
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $33.54 Our Price: $26.83 Savings: $6.71
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Carving Rougher Bit - 2 Flute, M2 High Speed Steel, : 2847
Right Hand Rotation; 3/4" Cutting Diameter; 1-3/16" Cutting Length; 2-1/2" Overall Length; 1/2" Shank Diameter;
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Carving Rougher Bit - 2 Flute, M2 High Speed Steel, : 2877
Left Hand Rotation; 3/4" Cutting Diameter; 1-3/16" Cutting Length; 2-1/2" Overall Length; 1/2" Shank Diameter;
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Carving Rougher Bit - 2 Flute, M2 High Speed Steel, : 2844
Right Hand Rotation; 1/2" Cutting Diameter; 1-3/16" Cutting Length; 2-1/2" Overall Length; 1/4" Shank Diameter;
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Carving Rougher Bit - 2 Flute, M2 High Speed Steel, : 2871
Left Hand Rotation; 5/8" Cutting Diameter; 1-3/16" Cutting Length; 2-1/2" Overall Length; 11mm Shank Diameter;
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Carving Rougher Bit - 2 Flute, M2 High Speed Steel, : 2841
Right Hand Rotation; 5/8" Cutting Diameter; 1-3/16" Cutting Length; 2-1/2" Overall Length; 11mm Shank Diameter;
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Carving Rougher Bit - 2 Flute, M2 High Speed Steel, : 2874
Left Hand Rotation; 1/2" Cutting Diameter; 1-3/16" Cutting Length; 2-1/2" Overall Length; 1/4" Shank Diameter;
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate 1972 Veining/Liner Bit for Carving Machine - 1/16" Tip; 15 Degree; 1/2" Cutting Height; 2-1/2" Overall Length; 1/4" Shank Diameter, 1-Flute Solid Carbide
Always consult your router's operation manual before setting the RPM for your router bit. If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions. 1) Up to 24,000 RPM for bits with an overall diameter of 1". 2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2". 3) Up to 18,000 RPM for bits with an overall diameter of 2". 4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2". 5) Up to 12,000 RPM for bits with an overall diameter of 3". 6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2".
|
|
List Price: $51.50 Our Price: $41.20 Savings: $10.30
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2845 Carving Rougher Bit - 2 Flute, M2 High Speed Steel - Right Hand Rotation; 5/8" Cutting Diameter; 1-3/16" Cutting Length; 2-1/2" Overall Length; 1/4" Shank Diameter
This carving rougher bit is designed to be used on a multiple carving machine.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2875 Carving Rougher Bit - 2 Flute, M2 High Speed Steel - Left Hand Rotation; 5/8" Cutting Diameter; 1-3/16" Cutting Length; 2-1/2" Overall Length; 1/4" Shank Diameter
This carving rougher bit is designed to be used on a multiple carving machine.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Carving Rougher Bit - 2 Flute, M2 High Speed Steel, : 2842
Right Hand Rotation; 3/4" Cutting Diameter; 1-3/16" Cutting Length; 2-1/2" Overall Length; 11mm Shank Diameter;
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Carving Rougher Bit - 2 Flute, M2 High Speed Steel, : 2872
Left Hand Rotation; 3/4" Cutting Diameter; 1-3/16" Cutting Length; 2-1/2" Overall Length; 11mm Shank Diameter;
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Carving Rougher Bit - 2 Flute, M2 High Speed Steel, : 2878
Left Hand Rotation; 1" Cutting Diameter; 1-3/16" Cutting Length; 2-1/2" Overall Length; 1/2" Shank Diameter;
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Carving Rougher Bit - 2 Flute, M2 High Speed Steel, : 2848
Right Hand Rotation; 1" Cutting Diameter; 1-3/16" Cutting Length; 2-1/2" Overall Length; 1/2" Shank Diameter;
|
|
|
|
Qty
|
Add
|
|
|
|
|
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>
|
