Print Catalogs

Legacy® Shop Notes

Video Clips

News

Links

Order Information

Custom Tools

Sharpening
Home > Magnate Router Bits & Accessories > Magnate Carbide Tipped Router Bits > Stagger Tooth
We found 10 results matching your criteria.
Stagger Tooth Panel With Center Pilot Router Bit 2-Flute, 1/2" Shank Carbide Tipped Stagger Tooth Pilot Panel Router Bit 2-Flute Carbide Tipped Stagger Tooth Plunge Router Bit 2-Flute Carbide Tipped

2-Flute, 1/2" Shank Carbide Tipped more info

2-Flute Carbide Tipped more info

2-Flute Carbide Tipped more info
Sort By:
Page of 1
MAGNATE 601 Stagger Tooth Plunge Router Bit - 3/8" Cutting Diameter; 1-1/2" Cutting Length; 3/8" Shank Diameter; 2-3/4" Overall Length; 2-Flute Carbide Tipped
MAGNATE 601 Stagger Tooth Plunge Router Bit - 3/8" Cutting Diameter; 1-1/2" Cutting Length; 3/8" Shank Diameter; 2-3/4" Overall Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $14.75
Our Price: $13.41
Savings: $1.34
Qty Add
MAGNATE 602 Stagger Tooth Plunge Router Bit - 3/8" Cutting Diameter; 1-1/2" Cutting Length; 1/2" Shank Diameter; 2-3/4" Overall Length; 2-Flute Carbide Tipped
MAGNATE 602 Stagger Tooth Plunge Router Bit - 3/8" Cutting Diameter; 1-1/2" Cutting Length; 1/2" Shank Diameter; 2-3/4" Overall Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $15.25
Our Price: $13.86
Savings: $1.39
Qty Add
MAGNATE 543 Stagger Tooth Pilot Panel Router Bit - 3/8" Cutting Diameter; 7/8" Cutting Length; 3/8" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped
MAGNATE 543 Stagger Tooth Pilot Panel Router Bit - 3/8" Cutting Diameter; 7/8" Cutting Length; 3/8" Shank Diameter; 1-1/4" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $16.28
Our Price: $14.80
Savings: $1.48
Qty Add
MAGNATE 603 Stagger Tooth Plunge Router Bit - 1/2" Cutting Diameter; 1-1/2" Cutting Length; 1/2" Shank Diameter; 3" Overall Length; 2-Flute Carbide Tipped
MAGNATE 603 Stagger Tooth Plunge Router Bit - 1/2" Cutting Diameter; 1-1/2" Cutting Length; 1/2" Shank Diameter; 3" Overall Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $16.86
Our Price: $15.33
Savings: $1.53
Qty Add
MAGNATE 604 Stagger Tooth Plunge Router Bit - 1/2" Cutting Diameter; 2" Cutting Length; 1/2" Shank Diameter; 3-1/4" Overall Length; 2-Flute Carbide Tipped
MAGNATE 604 Stagger Tooth Plunge Router Bit - 1/2" Cutting Diameter; 2" Cutting Length; 1/2" Shank Diameter; 3-1/4" Overall Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $18.91
Our Price: $17.19
Savings: $1.72
Qty Add
MAGNATE 612 Stagger Tooth Plunge Router Bit - 1/2" Cutting Diameter; 2" Cutting Length; 1/2" Shank Diameter; 4" Overall Length; Opposite Shear; 2-Flute Carbide Tipped
MAGNATE 612 Stagger Tooth Plunge Router Bit - 1/2" Cutting Diameter; 2" Cutting Length; 1/2" Shank Diameter; 4" Overall Length; Opposite Shear; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $19.16
Our Price: $17.42
Savings: $1.74
Qty Add
MAGNATE 547 Stagger Tooth Pilot Panel Router Bit - 5/8" Cutting Diameter; 2-1/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
MAGNATE 547 Stagger Tooth Pilot Panel Router Bit - 5/8" Cutting Diameter; 2-1/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $19.53
Our Price: $17.75
Savings: $1.78
Qty Add
MAGNATE 564 Stagger Tooth Panel With Center Pilot Router Bit - 1/2" Cutting Diameter; 1-1/8" & 1-1/8" Flute Height; 2-3/4" Cutting Length; 4-1/4" Overall Length; 2-Flute, 1/2" Shank Carbide Tipped
MAGNATE 564 Stagger Tooth Panel With Center Pilot Router Bit - 1/2" Cutting Diameter; 1-1/8" & 1-1/8" Flute Height; 2-3/4" Cutting Length; 4-1/4" Overall Length; 2-Flute, 1/2" Shank Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $19.68
Our Price: $17.89
Savings: $1.79
Qty Add
MAGNATE 605 Stagger Tooth Plunge Router Bit - 1/2" Cutting Diameter; 2-1/2" Cutting Length; 1/2" Shank Diameter; 4" Overall Length; 2-Flute Carbide Tipped
MAGNATE 605 Stagger Tooth Plunge Router Bit - 1/2" Cutting Diameter; 2-1/2" Cutting Length; 1/2" Shank Diameter; 4" Overall Length; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $22.62
Our Price: $20.56
Savings: $2.06
Qty Add
MAGNATE 614 Stagger Tooth Plunge Router Bit - 1/2" Cutting Diameter; 2-5/8" Cutting Length; 1/2" Shank Diameter; 5-1/2" Overall Length; Opposite Shear; 2-Flute Carbide Tipped
MAGNATE 614 Stagger Tooth Plunge Router Bit - 1/2" Cutting Diameter; 2-5/8" Cutting Length; 1/2" Shank Diameter; 5-1/2" Overall Length; Opposite Shear; 2-Flute Carbide Tipped
Always consult your router's operation manual before setting the RPM for your router bit.    If a router bit does not include a recommended speed chart, you may begin at approximately 2,000 RPM below the maximum speed listed in the guide below. Please note that these speeds are for reference only the optimal speed may vary depending on factors such as bit size, material type, and cutting conditions.    1) Up to 24,000 RPM for bits with an overall diameter of 1".   2) Up to 20,000 RPM for bits with an overall diameter of 1-1/2".   3) Up to 18,000 RPM for bits with an overall diameter of 2".   4) Up to 16,000 RPM for bits with an overall diameter of 2-1/2".   5) Up to 12,000 RPM for bits with an overall diameter of 3".   6) Up to 10,000 RPM for bits with an overall diameter of 3-1/2". more info
List Price: $24.06
Our Price: $21.87
Savings: $2.19
Qty Add
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>