Use with a wood cutting band saw, ( DO NOT use a metal-cutting bandsaw ). This gullet edge, tungsten carbide particle grit bandsaw blade is ideal for cutting applications involving materials with a cross section greater than 1/4” (6.4mm).
It cuts abrasive and hardened materials such as wire reinforced rubber, steel belted radial tires, ceramics, fiberglass, composites, hardened steel, cast iron (grey with voids), graphite, and case hardened materials.
The following bandsaw models use 138 inch ( 11 ft. 6 inch, 11' 6" ) bandsaw blades.
Amada H250SAII, HA250W, HFA250W, VM420; Dake LE-10A