Print Catalogs

Legacy® Shop Notes

Video Clips



Order Information

Custom Tools


Home > Aircraft/Car Detailing > GLARE® Spider
We found 0 results matching your criteria.

GLARE® SPIDER with Glassplexin® is the most advanced swirl removing product ever created. Utilizing a unique chemical process of ultra pure metal interlinked fusion to Glassplexin particles, GLARE® SPIDER will physically and chemically remove circular swirls and the appearance of spider webs in the paint, including on black paint even when viewed in direct sunlight. GLARE® SPIDER is not a cover up product, but a technologically advanced swirl removal solution that will permanently correct 99% of the swirls that appear in your paint which are caused by automated carwashes, hard water, dust, and dirt. Unlike other products that are sold as swirl remover products, GLARE® SPIDER actually works and does exactly what the label says it will do. GLARE® SPIDER will correct even the heaviest level of swirls and should always be followed with an application of GLARE® MICRO-FINISH or GLARE® PROFESSIONAL POLISH. GLARE® SPIDER has been designed to also work excellently on plastic too!
  • GLARE® products are also suitable for the following applications - Marine, Finished Furniture, Plexiglass and Lexan Repair;  Sporting Goods, CD/DVD Repair, Clear Transparent Plastic, Musical Instruments, Visors, Goggles and Glasses,  Solid Color Plastic and Fiberglass, and etc.
  • All GLARE® products are made in USA and 50 states EPA compliant for VOC's.  
  • MSDS available upon request.
  • GLARE® Application Instructions

    1  Knock Out
    2. Micro-Finish
    3. Spider
    4. Glare® Professional Polish

    In this order you will apply the products the same. Buffing with a thick Micro Fiber Towel hook and loop design until the product disappears. Turn over the Towel and use the other side to wipe off the excess. Use a new Micro Fiber Towel with each of the products mentioned above. After you finished using the four products as described you will then go over a second coat only with the Glare® Professional Polish. Rub in this time but not until the polish disappears. Let it dry to a haze! Do the whole vehicle without buffing the haze off. When you are finished with the vehicle at that time wait 30 min. then buff to a shine with a new Micro Fiber Towel. Do not get water on the Vehicle for 24 hours as it has to cure, and also do not ever put any other products over the Glare except a Glare® product as the Glassplexin® does not mix with Silicones, Waxes, and Polymers. Very important on this point. If you want to apply another coat of Glare you can do this without any problems to fill in new scratches. As you know when you drive any vehicle on the road the dirt from the highways will make new scratches so we suggest you put on a new coat of Glare® every other month. You will not need to go over the 4 step ever again unless your paint got keyed or vandalized etc.