|
|
|
|
|
Magnate 2700 Surface Planing ( Bottom Cleaning ) Router Bit - 3/4" Cutting Diameter; 1/4" Shank Diameter; 3/8" Cutting Length; 1-1/4" Shank Length
Good for cleaning out dadoes and cutting wide square grooves. Leaves a smooth clean finished surface. Also perfect for milling round, square, or flat stock on the Legacy Ornamental Mill.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2701 Surface Planing ( Bottom Cleaning ) Router Bit - 3/4" Cutting Diameter; 1/2" Shank Diameter; 15/32" Cutting Length; 2" Shank Length
Good for cleaning out dadoes and cutting wide square grooves. Leaves a smooth clean finished surface. Also perfect for milling round, square, or flat stock on the Legacy Ornamental Mill.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 358 Plunge Button Router Bit - 3/8" Cutting Diameter; 1/4" Button Diameter; 1/4" Shank Diameter; 1/8" Radius; 1-3/8" Shank Length
Designed for the Legacy Ornamental Milling machines. Plunge to mill buttons and fine details on flat mouldings and/or around the circumference of a spindle or leg. Adds just the right touch for those details that give style to any project.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 796 Thread Cutting 90-Degree Router Bit - 3/8" Cutting Height; 1/4" Shank Diameter; 1-1/2" Shank Length; 5/8" Overall Diameter
This cutter is used to cut internal and external threads i.e. a wooden bolt and nut. The 90 degree angle produces a stronger wooden thread that is less likely to chip out, The depth of cut is 3/16". The 3/8" dimension refers to the size of the V section measured parallel to the shank. Legacy's CCAM software will automatically generate the G Code for both parts.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3931 Classic Plunge Cutting Router Bit - 3/32" Radius; 1/2" Cutting Diameter; 1/4" Shank Diameter; 3/8" Cutting Height; 1-1/4" Shank Length
For decorative edge grooving on cabinet faces and for picture and mirror frames.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 761 V-Grooving & Carving 3-Flute Router Bit - 60 Degree; 5/8" Cutting Diameter; 1/4" Shank Diameter; 5/8" Cutting Length; 1-1/4" Shank Length
It is designed for professional sign making and lettering.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2712 Surface Planing ( Bottom Cleaning ) Router Bit - 7/8" Cutting Diameter; 1/4" Shank Diameter; 3/8" Cutting Length; 1-1/2" Shank Length
Good for cleaning out dadoes and cutting wide square grooves. Leaves a smooth clean finished surface. Also perfect for milling round, square, or flat stock on the Legacy Ornamental Mill.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2702 Surface Planing ( Bottom Cleaning ) Router Bit - 7/8" Cutting Diameter; 1/2" Shank Diameter; 15/32" Cutting Length; 2" Shank Length
Good for cleaning out dadoes and cutting wide square grooves. Leaves a smooth clean finished surface. Also perfect for milling round, square, or flat stock on the Legacy Ornamental Mill.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 350 Plunge Button Router Bit - 1/2" Cutting Diameter; 3/8" Button Diameter; 1/2" Shank Diameter; 1/4" Radius; 2" Shank Length
Designed for the Legacy Ornamental Milling machines. Plunge to mill buttons and fine details on flat mouldings and/or around the circumference of a spindle or leg. Adds just the right touch for those details that give style to any project.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7597 Rope Pen Router Bit - 0.65" Radius; 1/2" Cutting Diameter; 1/4" Shank Diameter; 3/8" Cutting Height; 1-1/2" Shank Length
Designed for the Legacy. This bit creates rope pens using a standard 7mm twist pen kit. The above illustration depicts a wood pen milled by the Legacy Ornamental Mill using this bit.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 763 V-Grooving & Carving 3-Flute Router Bit - 60 Degree; 5/8" Cutting Diameter; 1/2" Shank Diameter; 5/8" Cutting Length; 2" Shank Length
It is designed for professional sign making and lettering.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7591 Rope Pen Router Bit - 0.65" Radius; 1/2" Cutting Diameter; 1/2" Shank Diameter; 3/8" Cutting Height; 2" Shank Length
Designed for the Legacy. This bit creates rope pens using a standard 7mm twist pen kit. The above illustration depicts a wood pen milled by the Legacy Ornamental Mill using this bit.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 771 Side V-Grooving Router Bit - 90 Degree; 1/4" Cutting Height; 1/4" Shank Diameter; 1-1/2" Shank Length; 7/8" Overall Diameter
This side cutting v-grooving router bit is designed to make clean v-shaped grooves and chamfer edges. The bearing allows the bit to follow template whichever is applicable. Comes with a Magnate BR-05 bearing.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3932 Classic Plunge Cutting Router Bit - 5/32" Radius; 3/4" Cutting Diameter; 1/4" Shank Diameter; 1/2" Cutting Height; 1-1/4" Shank Length
For decorative edge grooving on cabinet faces and for picture and mirror frames.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2713 Surface Planing ( Bottom Cleaning ) Router Bit - 1" Cutting Diameter; 1/4" Shank Diameter; 3/8" Cutting Length; 1-1/2" Shank Length
Good for cleaning out dadoes and cutting wide square grooves. Leaves a smooth clean finished surface. Also perfect for milling round, square, or flat stock on the Legacy Ornamental Mill.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 776 Side V-Grooving Router Bit - 90 Degree; 1/4" Cutting Height; 1/2" Shank Diameter; 2" Shank Length; 7/8" Overall Diameter
This side cutting v-grooving router bit is designed to make clean v-shaped grooves and chamfer edges. The bearing allows the bit to follow template whichever is applicable. Comes with a Magnate BR-05 bearing.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2703 Surface Planing ( Bottom Cleaning ) Router Bit - 1" Cutting Diameter; 1/2" Shank Diameter; 15/32" Cutting Length; 2" Shank Length
Good for cleaning out dadoes and cutting wide square grooves. Leaves a smooth clean finished surface. Also perfect for milling round, square, or flat stock on the Legacy Ornamental Mill.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3933 Classic Plunge Cutting Router Bit - 5/32" Radius; 3/4" Cutting Diameter; 1/2" Shank Diameter; 1/2" Cutting Height; 1-1/2" Shank Length
For decorative edge grooving on cabinet faces and for picture and mirror frames.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 351 Plunge Button Router Bit - 5/8" Cutting Diameter; 5/16" Button Diameter; 1/2" Shank Diameter; 3/16" Radius; 2" Shank Length
Designed for the Legacy Ornamental Milling machines. Plunge to mill buttons and fine details on flat mouldings and/or around the circumference of a spindle or leg. Adds just the right touch for those details that give style to any project.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1171 Face-Inlay Extended Shank Router Bit - 1/8" Cutting Height; 5" Shank Length; 1/2" Shank Diameter; 7/8" Overall Diameter
It is designed to work with Legacy Ornamental Milling machines. Used for inlaying wood veneer, and other materials i.e. brass on either spindle stock up to 8" in diameter, or flat stock up to 4" wide that has a curved profile i.e. bow front drawer. Its extended shank allows milling on the side of a larger diameter material while following a curved profile. 5" Shank length is measured from the middle of the knife to the end of the shank.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 767 V-Grooving & Carving 3-Flute Router Bit - 45 Degree; 5/8" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Length; 2" Shank Length
It is designed for professional sign making and lettering.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2723 Surface Planing ( Bottom Cleaning ) Router Bit - 1-3/16" Cutting Diameter; 1/2" Shank Diameter; 15/32" Cutting Length; 2" Shank Length
Good for cleaning out dadoes and cutting wide square grooves. Leaves a smooth clean finished surface. Also perfect for milling round, square, or flat stock on the Legacy Ornamental Mill.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 353 Plunge Button Router Bit - 5/8" Cutting Diameter; 1/2" Button Diameter; 1/2" Shank Diameter; 3/10" Radius; 2" Shank Length
Designed for the Legacy Ornamental Milling machines. Plunge to mill buttons and fine details on flat mouldings and/or around the circumference of a spindle or leg. Adds just the right touch for those details that give style to any project.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 773 Side V-Grooving Router Bit - 90 Degree; 1/2" Cutting Height; 1/4" Shank Diameter; 1-1/2" Shank Length; 1-1/8" Overall Diameter
This side cutting v-grooving router bit is designed to make clean v-shaped grooves and chamfer edges. The bearing allows the bit to follow template whichever is applicable. Comes with a Magnate BR-05 bearing.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2714 Surface Planing ( Bottom Cleaning ) Router Bit - 1-1/4" Cutting Diameter; 1/4" Shank Diameter; 3/8" Cutting Length; 1-1/2" Shank Length
Good for cleaning out dadoes and cutting wide square grooves. Leaves a smooth clean finished surface. Also perfect for milling round, square, or flat stock on the Legacy Ornamental Mill.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2704 Surface Planing ( Bottom Cleaning ) Router Bit - 1-1/4" Cutting Diameter; 1/2" Shank Diameter; 15/32" Cutting Length; 2" Shank Length
Good for cleaning out dadoes and cutting wide square grooves. Leaves a smooth clean finished surface. Also perfect for milling round, square, or flat stock on the Legacy Ornamental Mill.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 778 Side V-Grooving Router Bit - 90 Degree; 1/2" Cutting Height; 1/2" Shank Diameter; 2" Shank Length; 1-1/8" Overall Diameter
This side cutting v-grooving router bit is designed to make clean v-shaped grooves and chamfer edges. The bearing allows the bit to follow template whichever is applicable. Comes with a Magnate BR-05 bearing.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1173 Face-Inlay Extended Shank Router Bit - 1/4" Cutting Height; 5" Shank Length; 1/2" Shank Diameter; 7/8" Overall Diameter
It is designed to work with Legacy Ornamental Milling machines. Used for inlaying wood veneer, and other materials i.e. brass on either spindle stock up to 8" in diameter, or flat stock up to 4" wide that has a curved profile i.e. bow front drawer. Its extended shank allows milling on the side of a larger diameter material while following a curved profile. 5" Shank length is measured from the middle of the knife to the end of the shank.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2724 Surface Planing ( Bottom Cleaning ) Router Bit - 1-3/8" Cutting Diameter; 1/2" Shank Diameter; 15/32" Cutting Length; 2" Shank Length
Good for cleaning out dadoes and cutting wide square grooves. Leaves a smooth clean finished surface. Also perfect for milling round, square, or flat stock on the Legacy Ornamental Mill.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2715 Surface Planing ( Bottom Cleaning ) Router Bit - 1-1/2" Cutting Diameter; 1/4" Shank Diameter; 3/8" Cutting Length; 1-1/2" Shank Length
Good for cleaning out dadoes and cutting wide square grooves. Leaves a smooth clean finished surface. Also perfect for milling round, square, or flat stock on the Legacy Ornamental Mill.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2705 Surface Planing ( Bottom Cleaning ) Router Bit - 1-1/2" Cutting Diameter; 1/2" Shank Diameter; 15/32" Cutting Length; 2" Shank Length
Good for cleaning out dadoes and cutting wide square grooves. Leaves a smooth clean finished surface. Also perfect for milling round, square, or flat stock on the Legacy Ornamental Mill.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7588 Rope Molding Router Bit - 3/4" Cutting Diameter; 2" Shank Length; 1/2" Shank Diameter; 51/64" Radius; 3/32" Profile Height
Designed for the Legacy Ornamental Mill. Used to mill rope and pillowed diamond designs on spindle and columns up to 10" diameter. These bits can also be used for other unusual groove/bead forming applications i.e. flat mouldings or indexed rosettes. #7584, #7585 and #7586 can be used in conjunction with the Combination Barley Twist bits to create big diameter barley twist profiles.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 352 Plunge Button Router Bit - 1" Cutting Diameter; 1/2" Button Diameter; 1/2" Shank Diameter; 3/10" Radius; 2" Shank Length
Designed for the Legacy Ornamental Milling machines. Plunge to mill buttons and fine details on flat mouldings and/or around the circumference of a spindle or leg. Adds just the right touch for those details that give style to any project.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3961 Brick Molding Router Bit - 1-1/4" Cutting Diameter; 3/8" Cutting Height; 1/2" Shank Diameter; 0.35" Radius; 2" Shank Length
Designed for the Legacy Ornamental Mill to make rosettes (as seen on the wainscot project of Legacy demo video) and a decorative trim. Can also be used for traditional mouldings.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3934 Classic Plunge Cutting Router Bit - 15/64" Radius; 1" Cutting Diameter; 1/2" Shank Diameter; 5/8" Cutting Height; 1-1/2" Shank Length
For decorative edge grooving on cabinet faces and for picture and mirror frames.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 779 Side V-Grooving Router Bit - 90 Degree; 3/4" Cutting Height; 1/2" Shank Diameter; 2" Shank Length; 1-3/8" Overall Diameter
This side cutting v-grooving router bit is designed to make clean v-shaped grooves and chamfer edges. The bearing allows the bit to follow template whichever is applicable. Comes with a Magnate BR-05 bearing.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 0941 25 Degree Bevel Router Bit - 5/8" Small Diameter; 1-11/16" Cutting Diameter; 1-1/4" Cutting Height; 1/2" Shank Diameter; 2" Shank Length
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7557 Barley Twist Router Bit - 3/4" Cutting Diameter; 3/32" Profile Height; 1/4" Shank Diameter; 1-1/2" Shank Length; 3/32" & 3/8" Radius; Spiral pen making for Legacy
This bit is designed to work with Legacy Ornamental machine to create traditional style barley twist. When combined with a upcut spiral bit they also form a beautiful hollow spiral. Can also be used for general grooving or flat moldings.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2725 Surface Planing ( Bottom Cleaning ) Router Bit - 40mm Cutting Diameter; 1/2" Shank Diameter; 15/32" Cutting Length; 2" Shank Length
Good for cleaning out dadoes and cutting wide square grooves. Leaves a smooth clean finished surface. Also perfect for milling round, square, or flat stock on the Legacy Ornamental Mill.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
|
Magnate 0935 45 Degree Bevel Spiral Router Bit - 1/2" Small Diameter; 1-1/2" Cutting Diameter; 1" Cutting Height; 1/2" Shank Diameter; 2" Shank Length
This bit is designed for the Legacy Ornamental milling machine. It creates spiral screws, and chamfered grooves on flat stock. It will work with the following pitches: 1-1/2", 3", 4-1/2", 6", 7-1/2", 9", 12" & 15". It can be also used as a chamfer, bevel, or flush trim bit.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7621 Pattern Extended Shank Router Bit - 1/2" Cutting Diameter; 1/2" Cutting Length; 1/2" Shank Diameter; 4-1/2" Shank Length; BR-04 Bearing
Originally designed for the Legacy Ornamental Milling machine, this bit allows you to follow a template when milling a contoured profile. It works on turnings up to 10" in diameter, square turnings up to 5", and square or flat stock up to 5" thick. The router follows the template as you make approximately 1/4" deep cuts for 2 to 3 passes. The bearing will follow the previous cut and support the router bit to eliminate chatter. This bit can also be used in a traditional router table like a pattern cutting router bit. 4-1/2" shank length is measured from middle of the knife to the end of the shank.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7558 Barley Twist Router Bit - 3/4" Cutting Diameter; 3/32" Profile Height; 1/2" Shank Diameter; 2" Shank Length; 3/32" & 3/8" Radius
This bit is designed to work with Legacy Ornamental machine to create traditional style barley twist. When combined with a upcut spiral bit they also form a beautiful hollow spiral. Can also be used for general grooving or flat moldings.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7581 Rope Molding Router Bit - 1" Cutting Diameter; 2" Shank Length; 1/2" Shank Diameter; 1-1/16" Radius; 1/8" Profile Height
Designed for the Legacy Ornamental Mill. Used to mill rope and pillowed diamond designs on spindle and columns up to 10" diameter. These bits can also be used for other unusual groove/bead forming applications i.e. flat mouldings or indexed rosettes. #7584, #7585 and #7586 can be used in conjunction with the Combination Barley Twist bits to create big diameter barley twist profiles.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7623 Pattern Extended Shank Router Bit - 3/4" Cutting Diameter; 3/4" Cutting Length; 1/2" Shank Diameter; 4-1/2" Shank Length; BR-09 Bearing
Originally designed for the Legacy Ornamental Milling machine, this bit allows you to follow a template when milling a contoured profile. It works on turnings up to 10" in diameter, square turnings up to 5", and square or flat stock up to 5" thick. The router follows the template as you make approximately 1/4" deep cuts for 2 to 3 passes. The bearing will follow the previous cut and support the router bit to eliminate chatter. This bit can also be used in a traditional router table like a pattern cutting router bit. 4-1/2" shank length is measured from middle of the knife to the end of the shank.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7566 Shallow Classic Point Router Bit - 3/16" Radius; 3/4" Cutting Diameter; 1/2" Shank Diameter; 3/8" Cutting Height; 2" Shank Length
Designed for the Legacy Ornamental Mill.These bits are similar to our Classic Plunge Cutting bits except that they have a shallow point instead of a round tip. They create decorative bead and cove edge details. The illustration depicts a wood column milled by the Legacy using these bits.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2553 Ball End Extended Shank Router Bit - 1/2" Cutting Diameter; 1/4" Small Diameter; 1/2" Shank Diameter; 1/4" Radius
Designed for the Legacy Ornamental Milling machines. Used to mill spiral or index flutes on contoured spindles i.e. pineapple pattern on a finial. Note : Shank length is measured from middle of the knife to the end of the shank.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 751 Side V-Grooving Extended Shank Router Bit - 90 Degree; 1/4" Cutting Height; 1/2" Shank Diameter; 5" Shank Length; 7/8" Overall Diameter
Designed for the Legacy Ornamental Milling machines. These bits are for milling v style flutes on spindles up to 8" in diameter or for cutting v style flutes or chamfer cuts on the face or a curved piece of flat stock i.e. bow front drawer. Comes with a BR-05 replacement bearing. 5" Shank length is measured from the middle of the knife to the end of the shank.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7536 Deep Classic Point Router Bit - 3/16" Radius; 3/4" Cutting Diameter; 1/2" Shank Diameter; 5/8" Cutting Height; 2" Shank Length
Designed for the Legacy Ornamental Mill..These bits are similar to our Classic Plunge Cutting bits except that they have a deep point instead of a round tip. They create decorative bead and cove edge details. The illustration depicts a wood column milled by the Legacy using these bits.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3935 Classic Plunge Cutting Router Bit - 3/8" Radius; 1-1/2" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length
For decorative edge grooving on cabinet faces and for picture and mirror frames.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3481 Double Bead Point Plunge Carbide Tipped Router Bit - 5/16" Radius; 1" Cutting Diameter; 1/2" Shank Diameter; 2" Shank Length
These bits create double bead profiles for decorative edges and bead & cove details. The above illustration depicts a wood column milled by the Legacy Ornamental Milling machines.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 5561 Horizontal Crown Molding Router Bit - 1-3/4" Cutting Diameter; 5/16" Cove Depth; 3/8" Cutting Height; 1/4" Shank Diameter; 1-1/2" Radius
This bit can also be used with the Legacy Ornamental Mill and/or overhead router to create linear mouldings. It can be used to create turnings between centers on the Legacy Ornamental Mill.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 753 Side V-Grooving Extended Shank Router Bit - 90 Degree; 1/2" Cutting Height; 1/2" Shank Diameter; 5" Shank Length; 1-1/8" Overall Diameter
Designed for the Legacy Ornamental Milling machines. These bits are for milling v style flutes on spindles up to 8" in diameter or for cutting v style flutes or chamfer cuts on the face or a curved piece of flat stock i.e. bow front drawer. Comes with a BR-05 replacement bearing. 5" Shank length is measured from the middle of the knife to the end of the shank.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2451 Shallow Flute Extended Shank Router Bit - 1/4" Flute Height; 1/2" Shank Diameter; 5" Shank Length; 13/16" Overall Diameter; BR-05 Bearing
Designed for the Legacy Ornamental Milling machines. These bits are for milling fluted columns and spindles up to 8" in diameter. Extended shaft allow for milling on the side of a larger diameter while following a curved profile. Note : 5" shank length is measured from middle of the knife to the end of the shank.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 775 Side V-Grooving Router Bit - 90 Degree; 1" Cutting Height; 1/2" Shank Diameter; 2" Shank Length; 1-5/8" Overall Diameter
This side cutting v-grooving router bit is designed to make clean v-shaped grooves and chamfer edges. The bearing allows the bit to follow template whichever is applicable. Comes with a Magnate BR-05 bearing.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7551 Barley Twist Router Bit - 1" Cutting Diameter; 1/4" Profile Height; 1/2" Shank Diameter; 2" Shank Length; 1/8" & 1/2" Radius
This bit is designed to work with Legacy Ornamental machine to create traditional style barley twist. When combined with a upcut spiral bit they also form a beautiful hollow spiral. Can also be used for general grooving or flat moldings.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3941 Large Cove Classic Plunge Router Bit - 1" Cutting Diameter; 1/4" Profile Height; 1/8", 1/2" Radius (Bead, Cove)
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2554 Ball End Extended Shank Router Bit - 5/8" Cutting Diameter; 5/16" Small Diameter; 1/2" Shank Diameter; 5/16" Radius
Designed for the Legacy Ornamental Milling machines. Used to mill spiral or index flutes on contoured spindles i.e. pineapple pattern on a finial. Note : Shank length is measured from middle of the knife to the end of the shank.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7678 Reeding Extended Shank with Bearing Router Bit - 3/16" Bead Height; 1/2" Shank Diameter; 3/32" Radius; BR-05 Bearing
Designed for the Legacy. These bits are for milling reeding columns and spindles up to 8" in diameter. Extended shaft allow for milling on the side of a larger diameter while following a curved profile. Note : 5" shank length is measured from middle of the knife to the end of the shank.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 6053 Fluting Extended Shank Router Bit - 3/16" Flute Height; 1/2" Shank Diameter; 5" Shank Length; 3/32" Radius; BR-05 Bearing
Designed for Legacy. These bits are for milling fluted columns and spindles up to 8” in diameter. Extended shaft allows for milling on the side of a larger diameter while following a curved profile. Note : 5" shank length is measured from middle of the knife to the end of the shank.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7561 Shallow Classic Point Router Bit - 1/4" Radius; 1" Cutting Diameter; 1/2" Shank Diameter; 1/2" Cutting Height; 2" Shank Length
Designed for the Legacy Ornamental Mill.These bits are similar to our Classic Plunge Cutting bits except that they have a shallow point instead of a round tip. They create decorative bead and cove edge details. The illustration depicts a wood column milled by the Legacy using these bits.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2453 Shallow Flute Extended Shank Router Bit - 3/8" Flute Height; 1/2" Shank Diameter; 5" Shank Length; 7/8" Overall Diameter; BR-05 Bearing
Designed for the Legacy Ornamental Milling machines. These bits are for milling fluted columns and spindles up to 8" in diameter. Extended shaft allow for milling on the side of a larger diameter while following a curved profile. Note : 5" shank length is measured from middle of the knife to the end of the shank.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 5563 Horizontal Crown Molding Router Bit - 1-3/4" Cutting Diameter; 5/16" Cove Depth; 3/8" Cutting Height; 1/2" Shank Diameter; 1-1/2" Radius
This bit can also be used with the Legacy Ornamental Mill and/or overhead router to create linear mouldings. It can be used to create turnings between centers on the Legacy Ornamental Mill.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 756 Side V-Grooving Extended Shank Router Bit - 90 Degree; 3/4" Cutting Height; 1/2" Shank Diameter; 5" Shank Length; 1-3/8" Overall Diameter
Designed for the Legacy Ornamental Milling machines. These bits are for milling v style flutes on spindles up to 8" in diameter or for cutting v style flutes or chamfer cuts on the face or a curved piece of flat stock i.e. bow front drawer. Comes with a BR-05 replacement bearing. 5" Shank length is measured from the middle of the knife to the end of the shank.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 5562 Horizontal Crown Molding Router Bit - 2" Cutting Diameter; 3/8" Cove Depth; 5/8" Cutting Height; 1/2" Shank Diameter; 1-19/32" Radius
This bit can also be used with the Legacy Ornamental Mill and/or overhead router to create linear mouldings. It can be used to create turnings between centers on the Legacy Ornamental Mill.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2706 Surface Planing ( Bottom Cleaning ) Router Bit - 2" Cutting Diameter; 1/2" Shank Diameter; 15/32" Cutting Length; 2" Shank Length
Good for cleaning out dadoes and cutting wide square grooves. Leaves a smooth clean finished surface. Also perfect for milling round, square, or flat stock on the Legacy Ornamental Mill.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7676 Reeding Extended Shank with Bearing Router Bit - 1/4" Bead Height; 1/2" Shank Diameter; 1/8" Radius; BR-05 Bearing
Designed for the Legacy. These bits are for milling reeding columns and spindles up to 8" in diameter. Extended shaft allow for milling on the side of a larger diameter while following a curved profile. Note : 5" shank length is measured from middle of the knife to the end of the shank.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2718 Surface Planing ( Bottom Cleaning ) Router Bit - 1-1/2" Cutting Diameter; 5/8" Shank Diameter; 15/32" Cutting Length; 5" Shank Length
Good for cleaning out dadoes and cutting wide square grooves. Leaves a smooth clean finished surface. Also perfect for milling round, square, or flat stock on the Legacy Ornamental Mill.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 6051 Fluting Extended Shank Router Bit - 1/4" Flute Height; 1/2" Shank Diameter; 5" Shank Length; 1/8" Radius; BR-05 Bearing
Designed for Legacy. These bits are for milling fluted columns and spindles up to 8” in diameter. Extended shaft allows for milling on the side of a larger diameter while following a curved profile. Note : 5" shank length is measured from middle of the knife to the end of the shank.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7696 Reeding Extended Shank Router Bit - 1/4" Bead Height; 1" Cutting Height; 1/8" Radius; 1/2" Shank Diameter
Designed for the Legacy Ornamental machines.. Note : 5" shank length is measured from middle of the knife to the end of the shank.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7582 Rope Molding Router Bit - 1-1/2" Cutting Diameter; 2" Shank Length; 1/2" Shank Diameter; 1-19/32" Radius; 3/16" Profile Height
Designed for the Legacy Ornamental Mill. Used to mill rope and pillowed diamond designs on spindle and columns up to 10" diameter. These bits can also be used for other unusual groove/bead forming applications i.e. flat mouldings or indexed rosettes. #7584, #7585 and #7586 can be used in conjunction with the Combination Barley Twist bits to create big diameter barley twist profiles.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 5564 Horizontal Crown Molding Router Bit - 2-1/8" Cutting Diameter; 3/8" Cove Depth; 5/8" Cutting Height; 1/2" Shank Diameter; 1-5/8" Radius
This bit can also be used with the Legacy Ornamental Mill and/or overhead router to create linear mouldings. It can be used to create turnings between centers on the Legacy Ornamental Mill.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3951 Classic Spiral Router Bit - 1" Cutting Diameter; 1/2" & 3/32" Radius
Designed for the Legacy Ornamental Mill. A cross between the classic plunge and the barley twist bit. Creates a more stylized bead and cove or a beautiful single start spiral. Can also be used to create a decorative groove with a half-rounded bottom.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3484 Double Bead Point Plunge Carbide Tipped Router Bit - 9/16" Radius; 1-1/2" Cutting Diameter; 1/2" Shank Diameter; 2" Shank Length
These bits create double bead profiles for decorative edges and bead & cove details. The above illustration depicts a wood column milled by the Legacy Ornamental Milling machines.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7531 Deep Classic Point Router Bit - 1/4" Radius; 1" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 2" Shank Length
Designed for the Legacy Ornamental Mill..These bits are similar to our Classic Plunge Cutting bits except that they have a deep point instead of a round tip. They create decorative bead and cove edge details. The illustration depicts a wood column milled by the Legacy using these bits.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2455 Shallow Flute Extended Shank Router Bit - 1/2" Flute Height; 1/2" Shank Diameter; 5" Shank Length; 7/8" Overall Diameter; BR-05 Bearing
Designed for the Legacy Ornamental Milling machines. These bits are for milling fluted columns and spindles up to 8" in diameter. Extended shaft allow for milling on the side of a larger diameter while following a curved profile. Note : 5" shank length is measured from middle of the knife to the end of the shank.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7554 Barley Twist Router Bit - 1-1/2" Cutting Diameter; 3/8" Profile Height; 1/2" Shank Diameter; 2" Shank Length; 3/16" & 3/4" Radius
This bit is designed to work with Legacy Ornamental machine to create traditional style barley twist. When combined with a upcut spiral bit they also form a beautiful hollow spiral. Can also be used for general grooving or flat moldings.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7671 Reeding Extended Shank with Bearing Router Bit - 3/8" Bead Height; 1/2" Shank Diameter; 3/16" Radius; BR-05 Bearing
Designed for the Legacy. These bits are for milling reeding columns and spindles up to 8" in diameter. Extended shaft allow for milling on the side of a larger diameter while following a curved profile. Note : 5" shank length is measured from middle of the knife to the end of the shank.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 5566 Horizontal Crown Molding Router Bit - 2-1/4" Cutting Diameter; 3/8" Cove Depth; 5/8" Cutting Height; 1/2" Shank Diameter; 1-7/8" Radius
This bit can also be used with the Legacy Ornamental Mill and/or overhead router to create linear mouldings. It can be used to create turnings between centers on the Legacy Ornamental Mill.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7691 Reeding Extended Shank Router Bit - 3/8" Bead Height; 1-1/8" Cutting Height; 3/16" Radius; 1/2" Shank Diameter
Designed for the Legacy Ornamental machines.. Note : 5" shank length is measured from middle of the knife to the end of the shank.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2708 Surface Planing ( Bottom Cleaning ) Router Bit - 2-1/2" Cutting Diameter; 1/2" Shank Diameter; 15/32" Cutting Length; 2" Shank Length
Good for cleaning out dadoes and cutting wide square grooves. Leaves a smooth clean finished surface. Also perfect for milling round, square, or flat stock on the Legacy Ornamental Mill.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2556 Ball End Extended Shank Router Bit - 3/4" Cutting Diameter; 3/8" Small Diameter; 1/2" Shank Diameter; 3/8" Radius
Designed for the Legacy Ornamental Milling machines. Used to mill spiral or index flutes on contoured spindles i.e. pineapple pattern on a finial. Note : Shank length is measured from middle of the knife to the end of the shank.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7564 Shallow Classic Point Router Bit - 3/8" Radius; 1-1/2" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 2" Shank Length
Designed for the Legacy Ornamental Mill.These bits are similar to our Classic Plunge Cutting bits except that they have a shallow point instead of a round tip. They create decorative bead and cove edge details. The illustration depicts a wood column milled by the Legacy using these bits.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 6054 Fluting Extended Shank Router Bit - 3/8" Flute Height; 1/2" Shank Diameter; 5" Shank Length; 3/16" Radius; BR-05 Bearing
Designed for Legacy. These bits are for milling fluted columns and spindles up to 8” in diameter. Extended shaft allows for milling on the side of a larger diameter while following a curved profile. Note : 5" shank length is measured from middle of the knife to the end of the shank.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7592 Plunge Roundover with Radius Router Bit - 2" Cutting Diameter; 1" & 1/16" Radius
This bit can be also used for the Legacy Ornamental Mill. Great for milling 2" and 3" diameter balls on posts or large beads on column bases. Can also be used for large diameter rope columns with a very pronounced rope design.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 5565 Horizontal Crown Molding Router Bit - 2-1/2" Cutting Diameter; 3/8" Cove Depth; 5/8" Cutting Height; 1/2" Shank Diameter; 2-1/4" Radius
This bit can also be used with the Legacy Ornamental Mill and/or overhead router to create linear mouldings. It can be used to create turnings between centers on the Legacy Ornamental Mill.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3944 Large Cove Classic Plunge Router Bit - 1-1/2" Cutting Diameter; 3/8" Profile Height; 3/16", 3/4" Radius (Bead, Cove)
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2456 Shallow Flute Extended Shank Router Bit - 5/8" Flute Height; 1/2" Shank Diameter; 5" Shank Length; 15/16" Overall Diameter; BR-05 Bearing
Designed for the Legacy Ornamental Milling machines. These bits are for milling fluted columns and spindles up to 8" in diameter. Extended shaft allow for milling on the side of a larger diameter while following a curved profile. Note : 5" shank length is measured from middle of the knife to the end of the shank.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2685 3 Flute Tapered Ball Nose Spiral Router Bit - 1/8" Cutting Diameter; 5 Degree; 3/4" Cutting Height; 1/4" Shank Diameter; 3" Overall Length
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2683 3 Flute Tapered Ball Nose Spiral Router Bit - 1/8" Cutting Diameter; 3 Degree; 1" Cutting Height; 1/4" Shank Diameter; 3" Overall Length
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3954 Classic Spiral Router Bit - 1-1/2" Cutting Diameter; 3/4" & 9/64" Radius
Designed for the Legacy Ornamental Mill. A cross between the classic plunge and the barley twist bit. Creates a more stylized bead and cove or a beautiful single start spiral. Can also be used to create a decorative groove with a half-rounded bottom.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2686 3 Flute Tapered Ball Nose Spiral Router Bit - 1/8" Cutting Diameter; 7 Degree; 1/2" Cutting Height; 1/4" Shank Diameter; 3" Overall Length
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7534 Deep Classic Point Router Bit - 3/8" Radius; 1-1/2" Cutting Diameter; 1/2" Shank Diameter; 1" Cutting Height; 2" Shank Length
Designed for the Legacy Ornamental Mill..These bits are similar to our Classic Plunge Cutting bits except that they have a deep point instead of a round tip. They create decorative bead and cove edge details. The illustration depicts a wood column milled by the Legacy using these bits.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7584 Rope Molding Router Bit - 2" Cutting Diameter; 2" Shank Length; 1/2" Shank Diameter; 2-1/8" Radius; 1/4" Profile Height
Designed for the Legacy Ornamental Mill. Used to mill rope and pillowed diamond designs on spindle and columns up to 10" diameter. These bits can also be used for other unusual groove/bead forming applications i.e. flat mouldings or indexed rosettes. #7584, #7585 and #7586 can be used in conjunction with the Combination Barley Twist bits to create big diameter barley twist profiles.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 6052 Fluting Extended Shank Router Bit - 1/2" Flute Height; 1/2" Shank Diameter; 5" Shank Length; 1/4" Radius; BR-05 Bearing
Designed for Legacy. These bits are for milling fluted columns and spindles up to 8” in diameter. Extended shaft allows for milling on the side of a larger diameter while following a curved profile. Note : 5" shank length is measured from middle of the knife to the end of the shank.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7672 Reeding Extended Shank with Bearing Router Bit - 1/2" Bead Height; 1/2" Shank Diameter; 1/4" Radius; BR-05 Bearing
Designed for the Legacy. These bits are for milling reeding columns and spindles up to 8" in diameter. Extended shaft allow for milling on the side of a larger diameter while following a curved profile. Note : 5" shank length is measured from middle of the knife to the end of the shank.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7522 Combination Rope Molding Router Bit - 2" Cutting Diameter; 4-1/4" Radius; 0.1193" Profile Height
Designed for the Legacy Ornamental Mill. #7521 (1st Cut) and #7522 (2nd cut) are used conjunctionally to create 4" diameter rope molding profiles while #7524 and #7525 are used for 5" diameter rope molding; #7527 and #7528 for 6" diameter rope molding.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7692 Reeding Extended Shank Router Bit - 1/2" Bead Height; 1-1/4" Cutting Height; 1/4" Radius; 1/2" Shank Diameter
Designed for the Legacy Ornamental machines.. Note : 5" shank length is measured from middle of the knife to the end of the shank.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7552 Barley Twist Router Bit - 2" Cutting Diameter; 1/2" Profile Height; 1/2" Shank Diameter; 2" Shank Length; 1/4" & 1" Radius
This bit is designed to work with Legacy Ornamental machine to create traditional style barley twist. When combined with a upcut spiral bit they also form a beautiful hollow spiral. Can also be used for general grooving or flat moldings.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2707 Surface Planing ( Bottom Cleaning ) Router Bit - 2-3/4" Cutting Diameter; 1/2" Shank Diameter; 15/32" Cutting Length; 2" Shank Length
Good for cleaning out dadoes and cutting wide square grooves. Leaves a smooth clean finished surface. Also perfect for milling round, square, or flat stock on the Legacy Ornamental Mill.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7562 Shallow Classic Point Router Bit - 1/2" Radius; 2" Cutting Diameter; 1/2" Shank Diameter; 1" Cutting Height; 2" Shank Length
Designed for the Legacy Ornamental Mill.These bits are similar to our Classic Plunge Cutting bits except that they have a shallow point instead of a round tip. They create decorative bead and cove edge details. The illustration depicts a wood column milled by the Legacy using these bits.
|
|
|
|
Qty
|
Add
|
|
|
|
|
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>
|
