Magnate W1315 Wire Clamps - 2" Diameter
Used to connect flexible piping to dust hoods, blast gates and fittings.
Qty
Add
Magnate W1314 Wire Clamps - 2-1/2" Diameter
Used to connect flexible piping to dust hoods, blast gates and fittings.
Qty
Add
Magnate W1316 Wire Clamps - 3" Diameter
Used to connect flexible piping to dust hoods, blast gates and fittings.
Qty
Add
Magnate W1025 Steel Clamps - 2" Diameter
Used to connect flexible piping to dust hoods, blast gates and fittings.
Qty
Add
Magnate W1317 Wire Clamps - 4" Diameter
Used to connect flexible piping to dust hoods, blast gates and fittings.
Qty
Add
Magnate W1021 Steel Clamps - 3" Diameter
Used to connect flexible piping to dust hoods, blast gates and fittings.
Qty
Add
Magnate W1313 Steel Clamps - 2-1/2" Diameter
Used to connect flexible piping to dust hoods, blast gates and fittings.
Qty
Add
Magnate W1318 Wire Clamps - 5" Diameter
Used to connect flexible piping to dust hoods, blast gates and fittings.
Qty
Add
Magnate W1022 Steel Clamps - 4" Diameter
Used to connect flexible piping to dust hoods, blast gates and fittings.
Qty
Add
Magnate W1319 Wire Clamps - 6" Diameter
Used to connect flexible piping to dust hoods, blast gates and fittings.
Qty
Add
Magnate W1023 Steel Clamps - 5" Diameter
Used to connect flexible piping to dust hoods, blast gates and fittings.
Qty
Add
Magnate W1024 Steel Clamps - 6" Diameter
Used to connect flexible piping to dust hoods, blast gates and fittings.
Qty
Add
Magnate W1020 Reducers - 3" --> 2" Outer Diameter; 4" Length; 3" Width; 3" Height
allow woodworkers to step down from a larger main line to smaller branch lines. This step-down increases air velocity near the machine where it's needed most.
Qty
Add
Magnate W1041 Adaptors - 3"--> 2-1/2" Outer Diameter; 3-3/16" Length; 3" Overall Diameter
For use with Shop-Vacs or their equivalent to connect a 3” and 4” line, or to tie into other machines that have 2-1/2” dust ports.
Qty
Add
Magnate W1044 Adaptors - 4" --> 2-1/2" Outer Diameter; 4-1/2" Length; 4-1/4" Overall Diameter
For use with Shop-Vacs or their equivalent to connect a 3” and 4” line, or to tie into other machines that have 2-1/2” dust ports.
Qty
Add
Magnate W1001 Jointer Dust Hoods, 4" Outer Diameter - 8-1/4" Length; 8-1/4" Width; 2-1/2" Height; fits over a 6-1/2” x 6-1/2” chute
Available in two sizes that fit most jointers on the market today. Model M1001 fits over a 6-1/2” x 6-1/2” chute and the M1002 fits over a 7” x 8-1/2” chute. It can be attached with screw or double-sided tape.
Qty
Add
Magnate W1010 Universal Dust Hoods, 4" Outer Diameter - 6-1/4" Length; 6-1/4" Width; 2-1/2" Height
Fits over 4-1/2” hole on band saws, table saws, shapers, sanders, etc.
Qty
Add
Magnate W1018 Splices - 3" Outer Diameter; 4-15/16" Length; 2-15/16" Width; 2-15/16" Height
Designed to connect full sections of hose for longer runs or to utilize short sections.
Qty
Add
Magnate W1002 Jointer Dust Hoods, 4" Outer Diameter - 8-7/16" Length; 10-1/4" Width; 2-1/2" Height; fits over a 7” x 8-1/2” chute
Available in two sizes that fit most jointers on the market today. Model M1001 fits over a 6-1/2” x 6-1/2” chute and the M1002 fits over a 7” x 8-1/2” chute. It can be attached with screw or double-sided tape.
Qty
Add
Reducers, : W1011
4" --> 3" Outer Diameter; 2-7/16" Length; 4" Width; 4" Height;
Qty
Add
Magnate W1012 T's Dust Port - 3" Outer Diameter; 7-5/8" Length; 6" Width; 2-7/8" Height
T allows you the option of adding branches to your system so they can service each machine in the shop.
Qty
Add
Magnate W1006 Plastic Blast Gate - 3" Diameter
Used to control air flow from one machine to another. Plastic blast gates feature a textured surface and easy sliding gate action.
Qty
Add
Magnate W1016 Elbows - 3" Outer Diameter
Elbows are necessary whenever dust work changes direction, such as from the dust collector to an overhead main line, or when connecting individual machines to branch lines.
Qty
Add
Magnate W1004 Table Saw Dust Hood - 12-1/4" Length; 12-1/4" Width; 2-1/2" Height
Available in two sizes, these hoods are designed to fit most 8”, 10” and 12” contractor type table saws, foreign and domestic. Mounted face down when in use, they can be adapted to other machines as well.
Qty
Add
Magnate W1007 Plastic Blast Gate - 4" Diameter
Used to control air flow from one machine to another. Plastic blast gates feature a textured surface and easy sliding gate action.
Qty
Add
Magnate W1019 Splices - 4" Outer Diameter; 6-1/8" Length; 3-15/16" Width; 3-15/16" Height
Designed to connect full sections of hose for longer runs or to utilize short sections.
Qty
Add
Magnate W1042 Universal Dust Ports, 2-1/2" Outer Diameter - 4" Length; 3-5/8" Width; 3-13/16" Height
It fits over a 3” hole and is made to the same specifications as our M1041 Adaptor, but with a flange added so you can attach it directly to any machine. Can attach with either double-sided tape or four screws.
Qty
Add
Floor Sweeps, : W1003
24" Length; 7" Width; 3-1/2" Height;
Qty
Add
Magnate W1005 Table Saw Dust Hood - 14-1/16" Length; 14-1/16" Width; 2-1/2" Height
Available in two sizes, these hoods are designed to fit most 8”, 10” and 12” contractor type table saws, foreign and domestic. Mounted face down when in use, they can be adapted to other machines as well.
Qty
Add
Magnate W1013 T's Dust Port - 4" Outer Diameter; 9-3/4" Length; 8" Width; 4-1/16" Height
T allows you the option of adding branches to your system so they can service each machine in the shop.
Qty
Add
Magnate W1017 Elbows - 4" Outer Diameter
Elbows are necessary whenever dust work changes direction, such as from the dust collector to an overhead main line, or when connecting individual machines to branch lines.
Qty
Add
Magnate W1014 Y's Dust Port - 3" Outer Diameter; 7-7/8" Length; 6-3/4" Width; 2-7/8" Height
Y’s are used to attached branch lines to service more than one machine. It increases lateral air flow and efficiency.
Qty
Add
Magnate W1008 Plastic Blast Gate - 5" Diameter
Used to control air flow from one machine to another. Plastic blast gates feature a textured surface and easy sliding gate action.
Qty
Add
Magnate W1015 Y's Dust Port - 4" Outer Diameter; 9-13/16" Length; 8-1/4" Width; 4-1/16" Height
Y’s are used to attached branch lines to service more than one machine. It increases lateral air flow and efficiency.
Qty
Add
Magnate W1009 Plastic Blast Gate - 6" Diameter
Used to control air flow from one machine to another. Plastic blast gates feature a textured surface and easy sliding gate action.
Qty
Add
Magnate W1141 Aluminum Blast Gate - 3" Diameter
Used to control air flow from one machine to another. We offer plastic and aluminum blast gates. Aluminum blast gates are top quality and feature a cast aluminum body with steel gate and locking knob.
Qty
Add
Magnate W1142 Aluminum Blast Gate - 4" Diameter
Used to control air flow from one machine to another. We offer plastic and aluminum blast gates. Aluminum blast gates are top quality and feature a cast aluminum body with steel gate and locking knob.
Qty
Add
3"D x 10' Hose : W1030
3" Diameter; 10' Length;
Qty
Add
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>
