|
|
|
|
|
Magnate M1154 T-Bushing - 1/2" Inside Diameter; 3/4" Outside Diameter
Reduces the bore size of the shaper cutter. T-Bushings come with a flange for easy removal. In the situation where the bore size of a shaper cutter is larger than the size of the shaper spindle, two T-bushings can be placed at the top and bottom of the shaper cutter to secure its position by tightening spindle nut.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1159 Spacers - 1/2" Inside Diameter; 1" Outside Diameter; 1/4" Height
Spacers are used for positioning shaper cutters on the shaper spindle. In some cases, when a spacer is placed in between two stacked shapers, a tongue profile can be formed.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1158 Straight Bushing - 1/2" Inside Diameter; 3/4" Outside Diameter; 3/8" Height
Straight bushings reduce the bore size of the shaper cutter. When the bore size of a shaper cutter is larger than the size of the shapers spindle, multiple straight bushings can be placed in the bore of the shaper cutters.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1160 Spacers - 1/2" Inside Diameter; 1" Outside Diameter; 3/8" Height
Spacers are used for positioning shaper cutters on the shaper spindle. In some cases, when a spacer is placed in between two stacked shapers, a tongue profile can be formed.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1157 Straight Bushing - 3/4" Inside Diameter; 1" Outside Diameter; 3/8" Height
Straight bushings reduce the bore size of the shaper cutter. When the bore size of a shaper cutter is larger than the size of the shapers spindle, multiple straight bushings can be placed in the bore of the shaper cutters.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1161 Spacers - 1/2" Inside Diameter; 1" Outside Diameter; 1/2" Height
Spacers are used for positioning shaper cutters on the shaper spindle. In some cases, when a spacer is placed in between two stacked shapers, a tongue profile can be formed.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1155 Straight Bushing - 1" Inside Diameter; 1-1/4" Outside Diameter; 3/8" Height
Straight bushings reduce the bore size of the shaper cutter. When the bore size of a shaper cutter is larger than the size of the shapers spindle, multiple straight bushings can be placed in the bore of the shaper cutters.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1162 Spacers - 1/2" Inside Diameter; 1" Outside Diameter; 3/4" Height
Spacers are used for positioning shaper cutters on the shaper spindle. In some cases, when a spacer is placed in between two stacked shapers, a tongue profile can be formed.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1156 Straight Bushing - 3/4" Inside Diameter; 1-1/4" Outside Diameter; 3/8" Height
Straight bushings reduce the bore size of the shaper cutter. When the bore size of a shaper cutter is larger than the size of the shapers spindle, multiple straight bushings can be placed in the bore of the shaper cutters.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1163 Spacers - 1/2" Inside Diameter; 1" Outside Diameter; 1" Height
Spacers are used for positioning shaper cutters on the shaper spindle. In some cases, when a spacer is placed in between two stacked shapers, a tongue profile can be formed.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1164 Spacers - 3/4" Inside Diameter; 1-1/4" Outside Diameter; 1/4" Height
Spacers are used for positioning shaper cutters on the shaper spindle. In some cases, when a spacer is placed in between two stacked shapers, a tongue profile can be formed.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1165 Spacers - 3/4" Inside Diameter; 1-1/4" Outside Diameter; 3/8" Height
Spacers are used for positioning shaper cutters on the shaper spindle. In some cases, when a spacer is placed in between two stacked shapers, a tongue profile can be formed.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1166 Spacers - 3/4" Inside Diameter; 1-1/4" Outside Diameter; 1/2" Height
Spacers are used for positioning shaper cutters on the shaper spindle. In some cases, when a spacer is placed in between two stacked shapers, a tongue profile can be formed.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1167 Spacers - 3/4" Inside Diameter; 1-1/4" Outside Diameter; 3/4" Height
Spacers are used for positioning shaper cutters on the shaper spindle. In some cases, when a spacer is placed in between two stacked shapers, a tongue profile can be formed.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1168 Spacers - 3/4" Inside Diameter; 1-1/4" Outside Diameter; 1" Height
Spacers are used for positioning shaper cutters on the shaper spindle. In some cases, when a spacer is placed in between two stacked shapers, a tongue profile can be formed.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1151 T-Bushing - 1" Inside Diameter; 1-1/4" Outside Diameter
Reduces the bore size of the shaper cutter. T-Bushings come with a flange for easy removal. In the situation where the bore size of a shaper cutter is larger than the size of the shaper spindle, two T-bushings can be placed at the top and bottom of the shaper cutter to secure its position by tightening spindle nut.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1152 T-Bushing - 3/4" Inside Diameter; 1-1/4" Outside Diameter
Reduces the bore size of the shaper cutter. T-Bushings come with a flange for easy removal. In the situation where the bore size of a shaper cutter is larger than the size of the shaper spindle, two T-bushings can be placed at the top and bottom of the shaper cutter to secure its position by tightening spindle nut.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1153 T-Bushing - 3/4" Inside Diameter; 1" Outside Diameter
Reduces the bore size of the shaper cutter. T-Bushings come with a flange for easy removal. In the situation where the bore size of a shaper cutter is larger than the size of the shaper spindle, two T-bushings can be placed at the top and bottom of the shaper cutter to secure its position by tightening spindle nut.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1169 Spacers - 1" Inside Diameter; 1-1/2" Outside Diameter; 1/4" Height
Spacers are used for positioning shaper cutters on the shaper spindle. In some cases, when a spacer is placed in between two stacked shapers, a tongue profile can be formed.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1170 Spacers - 1" Inside Diameter; 1-1/2" Outside Diameter; 3/8" Height
Spacers are used for positioning shaper cutters on the shaper spindle. In some cases, when a spacer is placed in between two stacked shapers, a tongue profile can be formed.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1171 Spacers - 1" Inside Diameter; 1-1/2" Outside Diameter; 1/2" Height
Spacers are used for positioning shaper cutters on the shaper spindle. In some cases, when a spacer is placed in between two stacked shapers, a tongue profile can be formed.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1172 Spacers - 1" Inside Diameter; 1-1/2" Outside Diameter; 3/4" Height
Spacers are used for positioning shaper cutters on the shaper spindle. In some cases, when a spacer is placed in between two stacked shapers, a tongue profile can be formed.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1173 Spacers - 1" Inside Diameter; 1-1/2" Outside Diameter; 1" Height
Spacers are used for positioning shaper cutters on the shaper spindle. In some cases, when a spacer is placed in between two stacked shapers, a tongue profile can be formed.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1174 Spacers - 1-1/4" Inside Diameter; 1-3/4" Outside Diameter; 1/4" Height
Spacers are used for positioning shaper cutters on the shaper spindle. In some cases, when a spacer is placed in between two stacked shapers, a tongue profile can be formed.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1175 Spacers - 1-1/4" Inside Diameter; 1-3/4" Outside Diameter; 3/8" Height
Spacers are used for positioning shaper cutters on the shaper spindle. In some cases, when a spacer is placed in between two stacked shapers, a tongue profile can be formed.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1176 Spacers - 1-1/4" Inside Diameter; 1-3/4" Outside Diameter; 1/2" Height
Spacers are used for positioning shaper cutters on the shaper spindle. In some cases, when a spacer is placed in between two stacked shapers, a tongue profile can be formed.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1182 Double T-Bushing, 3/8" Height Both Sides - 1/2" Inside Diameter; 3/4" Outside Diameter
The Double T-Bushing is designed to be placed in-between two stacked shaper cutters with bore sizes larger than the size of the shaper spindle.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1177 Spacers - 1-1/4" Inside Diameter; 1-3/4" Outside Diameter; 3/4" Height
Spacers are used for positioning shaper cutters on the shaper spindle. In some cases, when a spacer is placed in between two stacked shapers, a tongue profile can be formed.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1181 Double T-Bushing, 3/8" Height Both Sides - 3/4" Inside Diameter; 1" Outside Diameter
The Double T-Bushing is designed to be placed in-between two stacked shaper cutters with bore sizes larger than the size of the shaper spindle.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1178 Spacers - 1-1/4" Inside Diameter; 1-3/4" Outside Diameter; 1" Height
Spacers are used for positioning shaper cutters on the shaper spindle. In some cases, when a spacer is placed in between two stacked shapers, a tongue profile can be formed.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1179 Double T-Bushing, 3/8" Height Both Sides - 1" Inside Diameter; 1-1/4" Outside Diameter
The Double T-Bushing is designed to be placed in-between two stacked shaper cutters with bore sizes larger than the size of the shaper spindle.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1180 Double T-Bushing, 3/8" Height Both Sides - 3/4" Inside Diameter; 1-1/4" Outside Diameter
The Double T-Bushing is designed to be placed in-between two stacked shaper cutters with bore sizes larger than the size of the shaper spindle.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1150 Long T-Bushing - 1/2" Inside Diameter; 3/4" Outside Diameter; 1-3/16" Height
Reduces the bore size of the shaper cutter. Long T-bushings come with a flange for easy removal. When the bore sizes of multiple stacked shaper cutters are larger than the size of the shaper spindle, place two long T-bushings at the top and bottom of the stacked shaper cutters. This will eliminate the number of straight bushings.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1149 Long T-Bushing - 3/4" Inside Diameter; 1" Outside Diameter; 1-3/16" Height
Reduces the bore size of the shaper cutter. Long T-bushings come with a flange for easy removal. When the bore sizes of multiple stacked shaper cutters are larger than the size of the shaper spindle, place two long T-bushings at the top and bottom of the stacked shaper cutters. This will eliminate the number of straight bushings.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1147 Long T-Bushing - 1" Inside Diameter; 1-1/4" Outside Diameter; 1-3/16" Height
Reduces the bore size of the shaper cutter. Long T-bushings come with a flange for easy removal. When the bore sizes of multiple stacked shaper cutters are larger than the size of the shaper spindle, place two long T-bushings at the top and bottom of the stacked shaper cutters. This will eliminate the number of straight bushings.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1148 Long T-Bushing - 3/4" Inside Diameter; 1-1/4" Outside Diameter; 1-3/16" Height
Reduces the bore size of the shaper cutter. Long T-bushings come with a flange for easy removal. When the bore sizes of multiple stacked shaper cutters are larger than the size of the shaper spindle, place two long T-bushings at the top and bottom of the stacked shaper cutters. This will eliminate the number of straight bushings.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1110 Ball Bearing Rub Collar for Shaper Cutters - 1/2" Bore; 1-1/8" Outside Diameter; 5/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1111 Ball Bearing Rub Collar for Shaper Cutters - 1/2" Bore; 1-1/4" Outside Diameter; 5/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1112 Ball Bearing Rub Collar for Shaper Cutters - 1/2" Bore; 1-3/8" Outside Diameter; 5/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1113 Ball Bearing Rub Collar for Shaper Cutters - 1/2" Bore; 1-1/2" Outside Diameter; 5/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1114 Ball Bearing Rub Collar for Shaper Cutters - 3/4" Bore; 1-5/8" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1115 Ball Bearing Rub Collar for Shaper Cutters - 3/4" Bore; 1-11/16" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1116 Ball Bearing Rub Collar for Shaper Cutters - 3/4" Bore; 1-3/4" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1117 Ball Bearing Rub Collar for Shaper Cutters - 3/4" Bore; 1-27/32" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1118 Ball Bearing Rub Collar for Shaper Cutters - 3/4" Bore; 1-7/8" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1132 Ball Bearing Rub Collar for Shaper Cutters - 3/4" Bore; 2-1/16" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1120 Ball Bearing Rub Collar for Shaper Cutters - 3/4" Bore; 2-1/8" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1078 Ball Bearing Rub Collar for Shaper Cutters - 1" Bore; 1-3/4" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1119 Ball Bearing Rub Collar for Shaper Cutters - 3/4" Bore; 2" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1079 Ball Bearing Rub Collar for Shaper Cutters - 1" Bore; 1-7/8" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1121 Ball Bearing Rub Collar for Shaper Cutters - 3/4" Bore; 2-3/16" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1080 Ball Bearing Rub Collar for Shaper Cutters - 1" Bore; 2" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1133 Ball Bearing Rub Collar for Shaper Cutters - 3/4" Bore; 2-1/4" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1134 Ball Bearing Rub Collar for Shaper Cutters - 3/4" Bore; 2-5/16" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1135 Ball Bearing Rub Collar for Shaper Cutters - 3/4" Bore; 2-3/8" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1136 Ball Bearing Rub Collar for Shaper Cutters - 3/4" Bore; 2-7/16" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1122 Ball Bearing Rub Collar for Shaper Cutters - 3/4" Bore; 2-5/8" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1137 Ball Bearing Rub Collar for Shaper Cutters - 3/4" Bore; 2-1/2" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1081 Ball Bearing Rub Collar for Shaper Cutters - 1" Bore; 2-1/8" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1138 Ball Bearing Rub Collar for Shaper Cutters - 3/4" Bore; 2-9/16" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1139 Ball Bearing Rub Collar for Shaper Cutters - 3/4" Bore; 2-11/16" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1140 Ball Bearing Rub Collar for Shaper Cutters - 3/4" Bore; 2-3/4" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1143 Ball Bearing Rub Collar for Shaper Cutters - 3/4" Bore; 2-13/16" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1144 Ball Bearing Rub Collar for Shaper Cutters - 3/4" Bore; 2-7/8" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1123 Ball Bearing Rub Collar for Shaper Cutters - 3/4" Bore; 2-15/16" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1082 Ball Bearing Rub Collar for Shaper Cutters - 1" Bore; 2-1/4" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1083 Ball Bearing Rub Collar for Shaper Cutters - 1" Bore; 2-3/8" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1084 Ball Bearing Rub Collar for Shaper Cutters - 1" Bore; 2-1/2" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1085 Ball Bearing Rub Collar for Shaper Cutters - 1" Bore; 2-5/8" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1086 Ball Bearing Rub Collar for Shaper Cutters - 1" Bore; 2-3/4" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1087 Ball Bearing Rub Collar for Shaper Cutters - 1" Bore; 2-7/8" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1088 Ball Bearing Rub Collar for Shaper Cutters - 1" Bore; 3" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1124 Ball Bearing Rub Collar for Shaper Cutters - 1-1/4" Bore; 2-1/4" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1090 Ball Bearing Rub Collar for Shaper Cutters - 1" Bore; 3-1/4" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1107 Ball Bearing Rub Collar for Shaper Cutters - 1-1/4" Bore; 2-3/8" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1125 Ball Bearing Rub Collar for Shaper Cutters - 1-1/4" Bore; 2-1/2" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1126 Ball Bearing Rub Collar for Shaper Cutters - 1-1/4" Bore; 2-3/4" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1108 Ball Bearing Rub Collar for Shaper Cutters - 1-1/4" Bore; 2-5/8" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1127 Ball Bearing Rub Collar for Shaper Cutters - 1-1/4" Bore; 3" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1128 Ball Bearing Rub Collar for Shaper Cutters - 1-1/4" Bore; 3-1/4" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1109 Ball Bearing Rub Collar for Shaper Cutters - 1-1/4" Bore; 2-3/4" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1129 Ball Bearing Rub Collar for Shaper Cutters - 1-1/4" Bore; 3-3/8" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1130 Ball Bearing Rub Collar for Shaper Cutters - 1-1/4" Bore; 3-1/2" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate M1131 Ball Bearing Rub Collar for Shaper Cutters - 1-1/4" Bore; 4" Outside Diameter; 7/16" Height
Placing on the top, bottom or between shaper cutters, this ball bearing rub collar is used to follow templates. It can also be used like a spacer.
|
|
|
|
Qty
|
Add
|
|
|
|
|
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>
|
