|
|
|
|
|
Magnate 1151 Face-Inlay Router Bit - 1/8" Cutting Height; 1/2" Shank Diameter; 7/8" Overall Diameter; 3" Overall Length
Used for inlaying wood veneer, and other material i.e. brass.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 1153 Face-Inlay Router Bit - 1/4" Cutting Height; 1/2" Shank Diameter; 7/8" Overall Diameter; 3" Overall Length
Used for inlaying wood veneer, and other material i.e. brass.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 1155 Face-Inlay Router Bit - 3/8" Cutting Height; 1/2" Shank Diameter; 7/8" Overall Diameter; 3" Overall Length
Used for inlaying wood veneer, and other material i.e. brass.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 1157 Face-Inlay Router Bit - 1/2" Cutting Height; 1/2" Shank Diameter; 7/8" Overall Diameter; 3-1/2" Overall Length
Used for inlaying wood veneer, and other material i.e. brass.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 1159 Face-Inlay Router Bit - 3/4" Cutting Height; 1/2" Shank Diameter; 7/8" Overall Diameter; 3-1/2" Overall Length
Used for inlaying wood veneer, and other material i.e. brass.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 1171 Face-Inlay Extended Shank Router Bit - 1/8" Cutting Height; 5" Shank Length; 1/2" Shank Diameter; 7/8" Overall Diameter
It is designed to work with Legacy Ornamental Milling machines. Used for inlaying wood veneer, and other materials i.e. brass on either spindle stock up to 8" in diameter, or flat stock up to 4" wide that has a curved profile i.e. bow front drawer. Its extended shank allows milling on the side of a larger diameter material while following a curved profile. 5" Shank length is measured from the middle of the knife to the end of the shank.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 1173 Face-Inlay Extended Shank Router Bit - 1/4" Cutting Height; 5" Shank Length; 1/2" Shank Diameter; 7/8" Overall Diameter
It is designed to work with Legacy Ornamental Milling machines. Used for inlaying wood veneer, and other materials i.e. brass on either spindle stock up to 8" in diameter, or flat stock up to 4" wide that has a curved profile i.e. bow front drawer. Its extended shank allows milling on the side of a larger diameter material while following a curved profile. 5" Shank length is measured from the middle of the knife to the end of the shank.
|
|
|
|
Qty
|
Add
|
|
|
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>
|