|
|
|
|
|
Magnate 8046 Rosette Carbide Tipped Cutter - 2-3/4" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length
This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8051 Rosette Carbide Tipped Cutter - 2-5/8" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length
This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8015 Rosette Carbide Tipped Cutter - 2-1/8" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length
This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8011 Rosette Carbide Tipped Cutter - 2-1/8" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length
This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8013 Rosette Carbide Tipped Cutter - 2-1/8" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length
This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8014 Rosette Carbide Tipped Cutter - 2-1/8" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length
This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8012 Rosette Carbide Tipped Cutter - 2-1/8" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length
This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8052 Rosette Carbide Tipped Cutter - 2-1/2" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length
This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8016 Rosette Carbide Tipped Cutter - 2-1/8" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length
This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8017 Rosette Carbide Tipped Cutter - 2-1/8" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length
This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8019 Rosette Carbide Tipped Cutter - 2-1/8" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length
This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8020 Rosette Carbide Tipped Cutter - 2-1/8" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length
This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8018 Rosette Carbide Tipped Cutter - 2-1/8" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length
This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8047 Rosette Carbide Tipped Cutter - 2-3/4" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length
This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8096 Yo-Yo Rosette Carbide Tipped Cutter - 2-1/4" Profile Diameter; 5/8" Profile Height; Round Profile; 4-1/2" Overall Length; 12mm Shank Diameter; 2-5/8" Overall Diameter; Flute
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8015A Rosette Carbide Tipped Cutter - 2-5/8" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length
This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8042 Rosette Carbide Tipped Cutter - 2-3/4" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length
This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8013A Rosette Carbide Tipped Cutter - 2-5/8" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length
This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8011A Rosette Carbide Tipped Cutter - 2-5/8" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length
This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8012A Rosette Carbide Tipped Cutter - 2-5/8" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length
This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8014A Rosette Carbide Tipped Cutter - 2-5/8" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length
This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8016A Rosette Carbide Tipped Cutter - 2-5/8" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length
This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8017A Rosette Carbide Tipped Cutter - 2-5/8" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length
This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8019A Rosette Carbide Tipped Cutter - 2-5/8" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length
This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8020A Rosette Carbide Tipped Cutter - 2-5/8" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length
This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8097 Yo-Yo Rosette Carbide Tipped Cutter - 2-1/4" Profile Diameter; 5/8" Profile Height; Ogee Profile; 4-1/2" Overall Length; 12mm Shank Diameter; 2-5/8" Overall Diameter; Flute
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8018A Rosette Carbide Tipped Cutter - 2-5/8" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length
This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8044 Rosette Carbide Tipped Cutter - 3-1/8" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length
This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8045 Rosette Carbide Tipped Cutter - 3-1/8" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length
This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8015B Rosette Carbide Tipped Cutter - 3-5/16" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length
This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8011B Rosette Carbide Tipped Cutter - 3-5/16" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length
This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8013B Rosette Carbide Tipped Cutter - 3-5/16" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length
This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8014B Rosette Carbide Tipped Cutter - 3-5/16" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length
This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8012B Rosette Carbide Tipped Cutter - 3-5/16" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length
This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8016B Rosette Carbide Tipped Cutter - 3-5/16" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length
This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8017B Rosette Carbide Tipped Cutter - 3-5/16" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length
This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8019B Rosette Carbide Tipped Cutter - 3-5/16" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length
This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8020B Rosette Carbide Tipped Cutter - 3-5/16" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length
This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 8018B Rosette Carbide Tipped Cutter - 3-5/16" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Height; 1-1/2" Shank Length
This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm. This rosette cutter is designed for use only with a variable speed drill press or lathe under 1,000 rpm; In general, at slow controlled feed speed with 300-500 rpm.
|
|
|
|
Qty
|
Add
|
|
|
|
|
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>
|
