|
|
|
|
|
Magnate 700 V-Grooving Router Bit - 90 Degree; 1/4" Cutting Diameter; 1/4" Shank Diameter; 3/8" Cutting Length; 1-1/4" Shank Length
These bits make both shallow and deep grooves in solid wood and composition boards. Can be used for decorative veining of drawers and cabinets. Also good for sign lettering. When used with the Legacy Ornamental Mill, this bit can be used to chamfer square to round transitions. It can also be used to mill a diamond pattern on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 701 V-Grooving Router Bit - 90 Degree; 3/8" Cutting Diameter; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length
These bits make both shallow and deep grooves in solid wood and composition boards. Can be used for decorative veining of drawers and cabinets. Also good for sign lettering. When used with the Legacy Ornamental Mill, this bit can be used to chamfer square to round transitions. It can also be used to mill a diamond pattern on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 710 V-Grooving Router Bit - 60 Degree; 1/4" Cutting Diameter; 1/4" Shank Diameter; 3/8" Cutting Length; 1-1/4" Shank Length
These bits make both shallow and deep grooves in solid wood and composition boards. Can be used for decorative veining of drawers and cabinets. Also good for sign lettering. When used with the Legacy Ornamental Mill, this bit can be used to chamfer square to round transitions. It can also be used to mill a diamond pattern on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 702 V-Grooving Router Bit - 90 Degree; 1/2" Cutting Diameter; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length
These bits make both shallow and deep grooves in solid wood and composition boards. Can be used for decorative veining of drawers and cabinets. Also good for sign lettering. When used with the Legacy Ornamental Mill, this bit can be used to chamfer square to round transitions. It can also be used to mill a diamond pattern on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 711 V-Grooving Router Bit - 60 Degree; 1/2" Cutting Diameter; 1/4" Shank Diameter; 5/8" Cutting Length; 1-1/4" Shank Length
These bits make both shallow and deep grooves in solid wood and composition boards. Can be used for decorative veining of drawers and cabinets. Also good for sign lettering. When used with the Legacy Ornamental Mill, this bit can be used to chamfer square to round transitions. It can also be used to mill a diamond pattern on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 731 V-Grooving With Top Bearing Router Bit, 90 Degree - 3/8" Cutting Diameter; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length; BR-18 Bearing
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 732 V-Grooving With Top Bearing Router Bit, 90 Degree - 1/2" Cutting Diameter; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length; BR-05 Bearing
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 741 V-Grooving With Top Bearing Router Bit, 60 Degree - 1/2" Cutting Diameter; 1/4" Shank Diameter; 5/8" Cutting Length; 1-1/4" Shank Length; BR-04 Bearing
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 1251 Plunge Flat Roundover Router Bit - 3/32" Radius; 3/16" Small Diameter; 1/4" Shank Diameter; 5/16" Cutting Length; 1-1/4" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 712 V-Grooving Router Bit - 60 Degree; 3/4" Cutting Diameter; 1/4" Shank Diameter; 13/16" Cutting Length; 1-1/4" Shank Length
These bits make both shallow and deep grooves in solid wood and composition boards. Can be used for decorative veining of drawers and cabinets. Also good for sign lettering. When used with the Legacy Ornamental Mill, this bit can be used to chamfer square to round transitions. It can also be used to mill a diamond pattern on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 703 V-Grooving Router Bit - 90 Degree; 5/8" Cutting Diameter; 1/4" Shank Diameter; 5/8" Cutting Length; 1-1/4" Shank Length
These bits make both shallow and deep grooves in solid wood and composition boards. Can be used for decorative veining of drawers and cabinets. Also good for sign lettering. When used with the Legacy Ornamental Mill, this bit can be used to chamfer square to round transitions. It can also be used to mill a diamond pattern on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 1291 Classic Plunge Beading Router Bit - 5/64" Radius; 1/2" Cutting Diameter; 3/8" Cutting Height; 1/4" Shank Diameter; 1-1/4" Shank Length
Designed to create a bead-sided groove with flat bottom.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 1252 Plunge Flat Roundover Router Bit - 1/8" Radius; 1/4" Small Diameter; 1/4" Shank Diameter; 3/8" Cutting Length; 1-1/4" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 721 V-Grooving Router Bit - 120 Degree; 3/4" Cutting Diameter; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length
These bits make both shallow and deep grooves in solid wood and composition boards. Can be used for decorative veining of drawers and cabinets. Also good for sign lettering. When used with the Legacy Ornamental Mill, this bit can be used to chamfer square to round transitions. It can also be used to mill a diamond pattern on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 704 V-Grooving Router Bit - 90 Degree; 3/4" Cutting Diameter; 1/2" Shank Diameter; 5/8" Cutting Length; 1-1/2" Shank Length
These bits make both shallow and deep grooves in solid wood and composition boards. Can be used for decorative veining of drawers and cabinets. Also good for sign lettering. When used with the Legacy Ornamental Mill, this bit can be used to chamfer square to round transitions. It can also be used to mill a diamond pattern on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 1272 Plunge Flat Roundover Router Bit - 1/8" Radius; 1/4" Small Diameter; 1/2" Shank Diameter; 3/8" Cutting Length; 2" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 1262 Plunge Flat Roundover Router Bit - 1/8" Radius; 1/2" Small Diameter; 1/4" Shank Diameter; 3/8" Cutting Length; 1-1/4" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 1253 Plunge Flat Roundover Router Bit - 3/16" Radius; 1/4" Small Diameter; 1/4" Shank Diameter; 7/16" Cutting Length; 1-1/4" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 796 Thread Cutting 90-Degree Router Bit - 3/8" Cutting Height; 1/4" Shank Diameter; 1-1/2" Shank Length; 5/8" Overall Diameter
This cutter is used to cut internal and external threads i.e. a wooden bolt and nut. The 90 degree angle produces a stronger wooden thread that is less likely to chip out, The depth of cut is 3/16". The 3/8" dimension refers to the size of the V section measured parallel to the shank. Legacy's CCAM software will automatically generate the G Code for both parts.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 733 V-Grooving With Top Bearing Router Bit, 90 Degree - 5/8" Cutting Diameter; 1/4" Shank Diameter; 5/8" Cutting Length; 1-1/4" Shank Length; BR-09 Bearing
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 1282 Plunge Flat Roundover Router Bit - 1/8" Radius; 1/2" Small Diameter; 1/2" Shank Diameter; 3/8" Cutting Length; 2" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 1292 Classic Plunge Beading Router Bit - 1/4" Radius; 7/8" Cutting Diameter; 7/16" Cutting Height; 1/4" Shank Diameter; 1-1/4" Shank Length
Designed to create a bead-sided groove with flat bottom.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 761 V-Grooving & Carving 3-Flute Router Bit - 60 Degree; 5/8" Cutting Diameter; 1/4" Shank Diameter; 5/8" Cutting Length; 1-1/4" Shank Length
It is designed for professional sign making and lettering.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 1293 Classic Plunge Beading Router Bit - 1/4" Radius; 7/8" Cutting Diameter; 7/16" Cutting Height; 1/2" Shank Diameter; 1-1/2" Shank Length
Designed to create a bead-sided groove with flat bottom.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 1256 Plunge Flat Roundover Router Bit - 1/4" Radius; 1/8" Small Diameter; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 781 60 Degree Lettering Router Bit - 1" Cutting Diameter; 3/4" Cutting Height; 1/4" Shank Diameter; 1/8" Radius; 1-1/4" Shank Length
This bit is designed for quick removal of excess material during sign making and lettering.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 1273 Plunge Flat Roundover Router Bit - 3/16" Radius; 1/4" Small Diameter; 1/2" Shank Diameter; 7/16" Cutting Length; 2" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 1254 Plunge Flat Roundover Router Bit - 1/4" Radius; 1/4" Small Diameter; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 1268 Plunge Flat Roundover Router Bit - 1/4" Radius; 1/8" Small Diameter; 1/2" Shank Diameter; 1/2" Cutting Length; 2" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 3641 Cove & Bead Plunge Router Bit - 1/8", 1/8" Radius (Bead, Cove); 7/16" Cutting Height; 1" Cutting Diameter
Features an extra 1/2" wide cutter at bottom for fast and clean plunge.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 716 V-Grooving Router Bit - 60 Degree; 1" Cutting Diameter; 1/4" Shank Diameter; 1" Cutting Length; 1-1/4" Shank Length
These bits make both shallow and deep grooves in solid wood and composition boards. Can be used for decorative veining of drawers and cabinets. Also good for sign lettering. When used with the Legacy Ornamental Mill, this bit can be used to chamfer square to round transitions. It can also be used to mill a diamond pattern on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 734 V-Grooving With Top Bearing Router Bit, 90 Degree - 3/4" Cutting Diameter; 1/2" Shank Diameter; 5/8" Cutting Length; 1-1/2" Shank Length; BR-07 Bearing
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 763 V-Grooving & Carving 3-Flute Router Bit - 60 Degree; 5/8" Cutting Diameter; 1/2" Shank Diameter; 5/8" Cutting Length; 2" Shank Length
It is designed for professional sign making and lettering.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 705 V-Grooving Router Bit - 90 Degree; 7/8" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Length; 1-1/2" Shank Length
These bits make both shallow and deep grooves in solid wood and composition boards. Can be used for decorative veining of drawers and cabinets. Also good for sign lettering. When used with the Legacy Ornamental Mill, this bit can be used to chamfer square to round transitions. It can also be used to mill a diamond pattern on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 1255 Plunge Flat Roundover Router Bit - 5/16" Radius; 1/4" Small Diameter; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 1274 Plunge Flat Roundover Router Bit - 1/4" Radius; 1/4" Small Diameter; 1/2" Shank Diameter; 1/2" Cutting Length; 2" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 717 V-Grooving Router Bit - 60 Degree; 1" Cutting Diameter; 1/2" Shank Diameter; 1-3/32" Cutting Length; 1-1/2" Shank Length
These bits make both shallow and deep grooves in solid wood and composition boards. Can be used for decorative veining of drawers and cabinets. Also good for sign lettering. When used with the Legacy Ornamental Mill, this bit can be used to chamfer square to round transitions. It can also be used to mill a diamond pattern on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 771 Side V-Grooving Router Bit - 90 Degree; 1/4" Cutting Height; 1/4" Shank Diameter; 1-1/2" Shank Length; 7/8" Overall Diameter
This side cutting v-grooving router bit is designed to make clean v-shaped grooves and chamfer edges. The bearing allows the bit to follow template whichever is applicable. Comes with a Magnate BR-05 bearing.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 723 V-Grooving Router Bit - 120 Degree; 1" Cutting Diameter; 1/4" Shank Diameter; 15/32" Cutting Length; 1-1/4" Shank Length
These bits make both shallow and deep grooves in solid wood and composition boards. Can be used for decorative veining of drawers and cabinets. Also good for sign lettering. When used with the Legacy Ornamental Mill, this bit can be used to chamfer square to round transitions. It can also be used to mill a diamond pattern on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 784 60 Degree Lettering Router Bit - 1-1/8" Cutting Diameter; 3/4" Cutting Height; 1/2" Shank Diameter; 1/8" Radius; 1-1/2" Shank Length
This bit is designed for quick removal of excess material during sign making and lettering.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 776 Side V-Grooving Router Bit - 90 Degree; 1/4" Cutting Height; 1/2" Shank Diameter; 2" Shank Length; 7/8" Overall Diameter
This side cutting v-grooving router bit is designed to make clean v-shaped grooves and chamfer edges. The bearing allows the bit to follow template whichever is applicable. Comes with a Magnate BR-05 bearing.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 3642 Cove & Bead Plunge Router Bit - 3/16", 3/16" Radius (Bead, Cove); 9/16" Cutting Height; 1-1/4" Cutting Diameter
Features an extra 1/2" wide cutter at bottom for fast and clean plunge.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 1265 Plunge Flat Roundover Router Bit - 5/16" Radius; 1/2" Small Diameter; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 718 V-Grooving Router Bit - 90 Degree; 1-1/4" Cutting Diameter; 1/4" Shank Diameter; 7/8" Cutting Length; 1-1/4" Shank Length
These bits make both shallow and deep grooves in solid wood and composition boards. Can be used for decorative veining of drawers and cabinets. Also good for sign lettering. When used with the Legacy Ornamental Mill, this bit can be used to chamfer square to round transitions. It can also be used to mill a diamond pattern on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 726 V-Grooving Router Bit - 120 Degree; 1" Cutting Diameter; 1/2" Shank Diameter; 15/32" Cutting Length; 1-1/2" Shank Length
These bits make both shallow and deep grooves in solid wood and composition boards. Can be used for decorative veining of drawers and cabinets. Also good for sign lettering. When used with the Legacy Ornamental Mill, this bit can be used to chamfer square to round transitions. It can also be used to mill a diamond pattern on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 3851 Raised Panel Groove, 25 Degree Face-Cut Router Bit - 1" Overall Diameter; 0.146" Profile Height; 3/8" Small Diameter; 0.4" Cutting Height; 1/4" Shank Diameter
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 1257 Plunge Flat Roundover Router Bit - 11/32" Radius; 3/16" Small Diameter; 1/4" Shank Diameter; 9/16" Cutting Length; 1-1/4" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 706 V-Grooving Router Bit - 90 Degree; 1" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Length; 2" Shank Length
These bits make both shallow and deep grooves in solid wood and composition boards. Can be used for decorative veining of drawers and cabinets. Also good for sign lettering. When used with the Legacy Ornamental Mill, this bit can be used to chamfer square to round transitions. It can also be used to mill a diamond pattern on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 1284 Plunge Flat Roundover Router Bit - 1/4" Radius; 7/16" Small Diameter; 1/2" Shank Diameter; 1/2" Cutting Length; 2" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 1285 Plunge Flat Roundover Router Bit - 5/16" Radius; 1/2" Small Diameter; 1/2" Shank Diameter; 1/2" Cutting Length; 2" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 767 V-Grooving & Carving 3-Flute Router Bit - 45 Degree; 5/8" Cutting Diameter; 1/2" Shank Diameter; 3/4" Cutting Length; 2" Shank Length
It is designed for professional sign making and lettering.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 1275 Plunge Flat Roundover Router Bit - 5/16" Radius; 1/4" Small Diameter; 1/2" Shank Diameter; 9/16" Cutting Length; 2" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 1269 Plunge Flat Roundover Router Bit - 11/32" Radius; 3/16" Small Diameter; 1/2" Shank Diameter; 9/16" Cutting Length; 2" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 773 Side V-Grooving Router Bit - 90 Degree; 1/2" Cutting Height; 1/4" Shank Diameter; 1-1/2" Shank Length; 1-1/8" Overall Diameter
This side cutting v-grooving router bit is designed to make clean v-shaped grooves and chamfer edges. The bearing allows the bit to follow template whichever is applicable. Comes with a Magnate BR-05 bearing.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 724 V-Grooving Router Bit - 120 Degree; 1-1/4" Cutting Diameter; 1/4" Shank Diameter; 21/32" Cutting Length; 1-1/4" Shank Length
These bits make both shallow and deep grooves in solid wood and composition boards. Can be used for decorative veining of drawers and cabinets. Also good for sign lettering. When used with the Legacy Ornamental Mill, this bit can be used to chamfer square to round transitions. It can also be used to mill a diamond pattern on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 727 V-Grooving Router Bit - 120 Degree; 1-1/4" Cutting Diameter; 1/2" Shank Diameter; 21/32" Cutting Length; 1-1/2" Shank Length
These bits make both shallow and deep grooves in solid wood and composition boards. Can be used for decorative veining of drawers and cabinets. Also good for sign lettering. When used with the Legacy Ornamental Mill, this bit can be used to chamfer square to round transitions. It can also be used to mill a diamond pattern on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 778 Side V-Grooving Router Bit - 90 Degree; 1/2" Cutting Height; 1/2" Shank Diameter; 2" Shank Length; 1-1/8" Overall Diameter
This side cutting v-grooving router bit is designed to make clean v-shaped grooves and chamfer edges. The bearing allows the bit to follow template whichever is applicable. Comes with a Magnate BR-05 bearing.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 794 60 Degree Lettering Router Bit - 1-1/8" Cutting Diameter; 3/4" Cutting Height; 1/2" Shank Diameter; 1/8" Radius; 1-1/2" Shank Length; Comes with a Magnate MR-07 bearing at shank
This bit is designed for quick removal of excess material during sign making and lettering.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 1276 Plunge Flat Roundover Router Bit - 3/8" Radius; 1/4" Small Diameter; 1/2" Shank Diameter; 5/8" Cutting Length; 2" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 707 V-Grooving Router Bit - 90 Degree; 1-1/4" Cutting Diameter; 1/2" Shank Diameter; 7/8" Cutting Length; 2" Shank Length
These bits make both shallow and deep grooves in solid wood and composition boards. Can be used for decorative veining of drawers and cabinets. Also good for sign lettering. When used with the Legacy Ornamental Mill, this bit can be used to chamfer square to round transitions. It can also be used to mill a diamond pattern on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 3856 Raised Panel Groove, 25 Degree Face-Cut Router Bit - 1-1/8" Overall Diameter; 0.16" Profile Height; 3/8" Small Diameter; 1/2" Cutting Height; 1/2" Shank Diameter
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 728 V-Grooving Router Bit - 120 Degree; 2" Cutting Diameter; 1/2" Shank Diameter; 11/16" Cutting Length; 1-1/2" Shank Length
These bits make both shallow and deep grooves in solid wood and composition boards. Can be used for decorative veining of drawers and cabinets. Also good for sign lettering. When used with the Legacy Ornamental Mill, this bit can be used to chamfer square to round transitions. It can also be used to mill a diamond pattern on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 1278 Plunge Flat Roundover Router Bit - 1/2" Radius; 1/4" Small Diameter; 1/2" Shank Diameter; 3/4" Cutting Length; 2" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 779 Side V-Grooving Router Bit - 90 Degree; 3/4" Cutting Height; 1/2" Shank Diameter; 2" Shank Length; 1-3/8" Overall Diameter
This side cutting v-grooving router bit is designed to make clean v-shaped grooves and chamfer edges. The bearing allows the bit to follow template whichever is applicable. Comes with a Magnate BR-05 bearing.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 708 V-Grooving Router Bit - 90 Degree; 1-1/2" Cutting Diameter; 1/2" Shank Diameter; 1" Cutting Length; 2" Shank Length
These bits make both shallow and deep grooves in solid wood and composition boards. Can be used for decorative veining of drawers and cabinets. Also good for sign lettering. When used with the Legacy Ornamental Mill, this bit can be used to chamfer square to round transitions. It can also be used to mill a diamond pattern on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 751 Side V-Grooving Extended Shank Router Bit - 90 Degree; 1/4" Cutting Height; 1/2" Shank Diameter; 5" Shank Length; 7/8" Overall Diameter
Designed for the Legacy Ornamental Milling machines. These bits are for milling v style flutes on spindles up to 8" in diameter or for cutting v style flutes or chamfer cuts on the face or a curved piece of flat stock i.e. bow front drawer. Comes with a BR-05 replacement bearing. 5" Shank length is measured from the middle of the knife to the end of the shank.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 753 Side V-Grooving Extended Shank Router Bit - 90 Degree; 1/2" Cutting Height; 1/2" Shank Diameter; 5" Shank Length; 1-1/8" Overall Diameter
Designed for the Legacy Ornamental Milling machines. These bits are for milling v style flutes on spindles up to 8" in diameter or for cutting v style flutes or chamfer cuts on the face or a curved piece of flat stock i.e. bow front drawer. Comes with a BR-05 replacement bearing. 5" Shank length is measured from the middle of the knife to the end of the shank.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 3858 Raised Panel Groove, 25 Degree Face-Cut Router Bit - 1.575" Overall Diameter; 1/4" Profile Height; 1/2" Small Diameter; 9/16" Cutting Height; 1/2" Shank Diameter
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 775 Side V-Grooving Router Bit - 90 Degree; 1" Cutting Height; 1/2" Shank Diameter; 2" Shank Length; 1-5/8" Overall Diameter
This side cutting v-grooving router bit is designed to make clean v-shaped grooves and chamfer edges. The bearing allows the bit to follow template whichever is applicable. Comes with a Magnate BR-05 bearing.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 3941 Large Cove Classic Plunge Router Bit - 1" Cutting Diameter; 1/4" Profile Height; 1/8", 1/2" Radius (Bead, Cove)
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 709 V-Grooving Router Bit - 90 Degree; 2" Cutting Diameter; 1/2" Shank Diameter; 1-1/4" Cutting Length; 2" Shank Length
These bits make both shallow and deep grooves in solid wood and composition boards. Can be used for decorative veining of drawers and cabinets. Also good for sign lettering. When used with the Legacy Ornamental Mill, this bit can be used to chamfer square to round transitions. It can also be used to mill a diamond pattern on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 756 Side V-Grooving Extended Shank Router Bit - 90 Degree; 3/4" Cutting Height; 1/2" Shank Diameter; 5" Shank Length; 1-3/8" Overall Diameter
Designed for the Legacy Ornamental Milling machines. These bits are for milling v style flutes on spindles up to 8" in diameter or for cutting v style flutes or chamfer cuts on the face or a curved piece of flat stock i.e. bow front drawer. Comes with a BR-05 replacement bearing. 5" Shank length is measured from the middle of the knife to the end of the shank.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 3951 Classic Spiral Router Bit - 1" Cutting Diameter; 1/2" & 3/32" Radius
Designed for the Legacy Ornamental Mill. A cross between the classic plunge and the barley twist bit. Creates a more stylized bead and cove or a beautiful single start spiral. Can also be used to create a decorative groove with a half-rounded bottom.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 3944 Large Cove Classic Plunge Router Bit - 1-1/2" Cutting Diameter; 3/8" Profile Height; 3/16", 3/4" Radius (Bead, Cove)
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 3954 Classic Spiral Router Bit - 1-1/2" Cutting Diameter; 3/4" & 9/64" Radius
Designed for the Legacy Ornamental Mill. A cross between the classic plunge and the barley twist bit. Creates a more stylized bead and cove or a beautiful single start spiral. Can also be used to create a decorative groove with a half-rounded bottom.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 3942 Large Cove Classic Plunge Router Bit - 2" Cutting Diameter; 1/2" Profile Height; 1/4", 1" Radius (Bead, Cove)
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 3952 Classic Spiral Router Bit - 2" Cutting Diameter; 1" & 3/16" Radius
Designed for the Legacy Ornamental Mill. A cross between the classic plunge and the barley twist bit. Creates a more stylized bead and cove or a beautiful single start spiral. Can also be used to create a decorative groove with a half-rounded bottom.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 3953 Classic Spiral Router Bit - 3" Cutting Diameter; 1-1/2" & 9/32" Radius
Designed for the Legacy Ornamental Mill. A cross between the classic plunge and the barley twist bit. Creates a more stylized bead and cove or a beautiful single start spiral. Can also be used to create a decorative groove with a half-rounded bottom.
|
|
|
|
Qty
|
Add
|
|
|
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>
|