|
|
|
|
|
Magnate 261 Straight Plunge Router Bit - 1/4" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 262 Straight Plunge Router Bit - 5/16" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 263 Straight Plunge Router Bit - 3/8" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 281 Straight Plunge Router Bit - 1/4" Cutting Diameter; 3/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 265 Straight Plunge Router Bit - 1/2" Cutting Diameter; 1" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 282 Straight Plunge Router Bit - 5/16" Cutting Diameter; 3/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 267 Straight Plunge Router Bit - 5/8" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 253 Straight Plunge Left-Hand Router Bit - 3/8" Cutting Diameter; 1" Cutting Height; 1/2" Shank Diameter; 2-5/8" Overall Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 283 Straight Plunge Router Bit - 3/8" Cutting Diameter; 1-1/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 284 Straight Plunge Router Bit - 7/16" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 268 Straight Plunge Router Bit - 3/4" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 284D Straight Plunge Router Bit - 15/32" Cutting Diameter; 1-1/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7508 Point Cutting Roundover Router Bit - 1/16" Radius; 1/4" Shank Diameter; 1/4" Cutting Length; 1-1/4" Shank Length
These bits can be used with the Legacy Ornamental Mill to create indexed beads and reeds on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 285 Straight Plunge Router Bit - 1/2" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 287K Straight Plunge Router Bit - 5/8" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3740 Plunge Ogee Router Bit - 3/8" Cutting Diameter; 1/8" Small Diameter; 5/16" Cutting Height; 1/16" Radius; 1-1/4" Shank Length
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7507 Point Cutting Roundover Router Bit - 1/8" Radius; 1/4" Shank Diameter; 3/8" Cutting Length; 1-1/4" Shank Length
These bits can be used with the Legacy Ornamental Mill to create indexed beads and reeds on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 269 Straight Plunge Router Bit - 7/8" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3910 Plunge Roundover Router Bit - 1/8" Radius; 1/8" Small Diameter; 1/4" Shank Diameter; 1/4" Cutting Length; 1-1/4" Shank Length
Combination cutters for plunging through boards and for rounding corners as well as edge forming.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1251 Plunge Flat Roundover Router Bit - 3/32" Radius; 3/16" Small Diameter; 1/4" Shank Diameter; 5/16" Cutting Length; 1-1/4" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 285L Straight Plunge Router Bit - 1/2" Cutting Diameter; 1-1/2" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 270 Straight Plunge Router Bit - 1" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7504 Point Cutting Roundover Router Bit - 3/16" Radius; 1/4" Shank Diameter; 7/16" Cutting Length; 1-1/4" Shank Length
These bits can be used with the Legacy Ornamental Mill to create indexed beads and reeds on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3744 Plunge Ogee Router Bit - 1/2" Cutting Diameter; 5/32" Small Diameter; 3/8" Cutting Height; 5/64" Radius; 1-1/4" Shank Length
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2521 Plunge Ball End Carbide Tipped Router Bit - 3/8" Cutting Diameter; 3/8" Cutting Length; 1/4" Shank Diameter; 3/16" Radius; 1-1/4" Shank Length
This bit creates a rounded inside edge on a slot that makes drawer opening easy.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 288U Straight Plunge Router Bit - 23/32" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3911 Plunge Roundover Router Bit - 3/16" Radius; 1/4" Small Diameter; 1/4" Shank Diameter; 5/16" Cutting Length; 1-1/4" Shank Length
Combination cutters for plunging through boards and for rounding corners as well as edge forming.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1291 Classic Plunge Beading Router Bit - 5/64" Radius; 1/2" Cutting Diameter; 3/8" Cutting Height; 1/4" Shank Diameter; 1-1/4" Shank Length
Designed to create a bead-sided groove with flat bottom.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1621 Plunge Roman Ogee Router Bit - 13/16" Cutting Diameter; 9/32" Small Diameter; 1/2" Cutting Height; 1/8" Radius
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1252 Plunge Flat Roundover Router Bit - 1/8" Radius; 1/4" Small Diameter; 1/4" Shank Diameter; 3/8" Cutting Length; 1-1/4" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2501 Plunge Ball End Carbide Tipped Router Bit - 3/8" Cutting Diameter; 3/8" Cutting Length; 1/2" Shank Diameter; 3/16" Radius; 1-1/2" Shank Length
This bit creates a rounded inside edge on a slot that makes drawer opening easy.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 288 Straight Plunge Router Bit - 3/4" Cutting Diameter; 1-1/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 285B Straight Plunge Router Bit - 1/2" Cutting Diameter; 2" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3917 Plunge Roundover Router Bit - 3/16" Radius; 1/4" Small Diameter; 1/2" Shank Diameter; 3/8" Cutting Length; 1-1/2" Shank Length
Combination cutters for plunging through boards and for rounding corners as well as edge forming.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2522 Plunge Ball End Carbide Tipped Router Bit - 1/2" Cutting Diameter; 1/2" Cutting Length; 1/4" Shank Diameter; 1/4" Radius; 1-1/4" Shank Length
This bit creates a rounded inside edge on a slot that makes drawer opening easy.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1272 Plunge Flat Roundover Router Bit - 1/8" Radius; 1/4" Small Diameter; 1/2" Shank Diameter; 3/8" Cutting Length; 2" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1262 Plunge Flat Roundover Router Bit - 1/8" Radius; 1/2" Small Diameter; 1/4" Shank Diameter; 3/8" Cutting Length; 1-1/4" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3741 Plunge Ogee Router Bit - 3/4" Cutting Diameter; 1/4" Small Diameter; 7/16" Cutting Height; 1/8" Radius; 1-1/4" Shank Length
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1253 Plunge Flat Roundover Router Bit - 3/16" Radius; 1/4" Small Diameter; 1/4" Shank Diameter; 7/16" Cutting Length; 1-1/4" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7503 Point Cutting Roundover Router Bit - 1/4" Radius; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length
These bits can be used with the Legacy Ornamental Mill to create indexed beads and reeds on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2502 Plunge Ball End Carbide Tipped Router Bit - 1/2" Cutting Diameter; 1/2" Cutting Length; 1/2" Shank Diameter; 1/4" Radius; 1-1/2" Shank Length
This bit creates a rounded inside edge on a slot that makes drawer opening easy.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 358 Plunge Button Router Bit - 3/8" Cutting Diameter; 1/4" Button Diameter; 1/4" Shank Diameter; 1/8" Radius; 1-3/8" Shank Length
Designed for the Legacy Ornamental Milling machines. Plunge to mill buttons and fine details on flat mouldings and/or around the circumference of a spindle or leg. Adds just the right touch for those details that give style to any project.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3912 Plunge Roundover Router Bit - 1/4" Radius; 1/4" Small Diameter; 1/4" Shank Diameter; 3/8" Cutting Length; 1-1/4" Shank Length
Combination cutters for plunging through boards and for rounding corners as well as edge forming.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3745 Plunge Ogee Router Bit - 3/4" Cutting Diameter; 1/4" Small Diameter; 7/16" Cutting Height; 1/8" Radius; 1-1/2" Shank Length
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 289 Straight Plunge Router Bit - 7/8" Cutting Diameter; 1-1/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3931 Classic Plunge Cutting Router Bit - 3/32" Radius; 1/2" Cutting Diameter; 1/4" Shank Diameter; 3/8" Cutting Height; 1-1/4" Shank Length
For decorative edge grooving on cabinet faces and for picture and mirror frames.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1282 Plunge Flat Roundover Router Bit - 1/8" Radius; 1/2" Small Diameter; 1/2" Shank Diameter; 3/8" Cutting Length; 2" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1292 Classic Plunge Beading Router Bit - 1/4" Radius; 7/8" Cutting Diameter; 7/16" Cutting Height; 1/4" Shank Diameter; 1-1/4" Shank Length
Designed to create a bead-sided groove with flat bottom.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7800 Bowl & Tray Plunge Router Bit - 1/8" Radius; 1/2" Cutting Diameter; 1/2" Cutting Height; 1/4" Shank Diameter; 1-1/4" Shank Length
This bit is designed to create a flat bottom, two square sides and two bottom radii in only one pass. Ideal for making dishes or serving trays.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1293 Classic Plunge Beading Router Bit - 1/4" Radius; 7/8" Cutting Diameter; 7/16" Cutting Height; 1/2" Shank Diameter; 1-1/2" Shank Length
Designed to create a bead-sided groove with flat bottom.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1256 Plunge Flat Roundover Router Bit - 1/4" Radius; 1/8" Small Diameter; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 295 Straight Plunge Router Bit - 5/8" Cutting Diameter; 2" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 290 Straight Plunge Router Bit - 1" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1273 Plunge Flat Roundover Router Bit - 3/16" Radius; 1/4" Small Diameter; 1/2" Shank Diameter; 7/16" Cutting Length; 2" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2523 Plunge Ball End Carbide Tipped Router Bit - 5/8" Cutting Diameter; 5/8" Cutting Length; 1/4" Shank Diameter; 5/16" Radius; 1-1/4" Shank Length
This bit creates a rounded inside edge on a slot that makes drawer opening easy.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1254 Plunge Flat Roundover Router Bit - 1/4" Radius; 1/4" Small Diameter; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1268 Plunge Flat Roundover Router Bit - 1/4" Radius; 1/8" Small Diameter; 1/2" Shank Diameter; 1/2" Cutting Length; 2" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3918 Plunge Roundover Router Bit - 1/4" Radius; 1/4" Small Diameter; 1/2" Shank Diameter; 3/8" Cutting Length; 1-1/2" Shank Length
Combination cutters for plunging through boards and for rounding corners as well as edge forming.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3641 Cove & Bead Plunge Router Bit - 1/8", 1/8" Radius (Bead, Cove); 7/16" Cutting Height; 1" Cutting Diameter
Features an extra 1/2" wide cutter at bottom for fast and clean plunge.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 350 Plunge Button Router Bit - 1/2" Cutting Diameter; 3/8" Button Diameter; 1/2" Shank Diameter; 1/4" Radius; 2" Shank Length
Designed for the Legacy Ornamental Milling machines. Plunge to mill buttons and fine details on flat mouldings and/or around the circumference of a spindle or leg. Adds just the right touch for those details that give style to any project.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7597 Rope Pen Router Bit - 0.65" Radius; 1/2" Cutting Diameter; 1/4" Shank Diameter; 3/8" Cutting Height; 1-1/2" Shank Length
Designed for the Legacy. This bit creates rope pens using a standard 7mm twist pen kit. The above illustration depicts a wood pen milled by the Legacy Ornamental Mill using this bit.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3742 Plunge Ogee Router Bit - 1" Cutting Diameter; 3/8" Small Diameter; 9/16" Cutting Height; 3/16" Radius; 1-1/4" Shank Length
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7591 Rope Pen Router Bit - 0.65" Radius; 1/2" Cutting Diameter; 1/2" Shank Diameter; 3/8" Cutting Height; 2" Shank Length
Designed for the Legacy. This bit creates rope pens using a standard 7mm twist pen kit. The above illustration depicts a wood pen milled by the Legacy Ornamental Mill using this bit.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3913 Plunge Roundover Router Bit - 5/16" Radius; 1/4" Small Diameter; 1/4" Shank Diameter; 7/16" Cutting Length; 1-1/4" Shank Length
Combination cutters for plunging through boards and for rounding corners as well as edge forming.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1255 Plunge Flat Roundover Router Bit - 5/16" Radius; 1/4" Small Diameter; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1274 Plunge Flat Roundover Router Bit - 1/4" Radius; 1/4" Small Diameter; 1/2" Shank Diameter; 1/2" Cutting Length; 2" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7509 Point Cutting Roundover Router Bit - 5/16" Radius; 1/4" Shank Diameter; 9/16" Cutting Length; 1-1/4" Shank Length
These bits can be used with the Legacy Ornamental Mill to create indexed beads and reeds on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2503 Plunge Ball End Carbide Tipped Router Bit - 5/8" Cutting Diameter; 5/8" Cutting Length; 1/2" Shank Diameter; 5/16" Radius; 1-1/2" Shank Length
This bit creates a rounded inside edge on a slot that makes drawer opening easy.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7513 Point Cutting Roundover Router Bit - 5/16" Radius; 1/2" Shank Diameter; 9/16" Cutting Length; 2" Shank Length
These bits can be used with the Legacy Ornamental Mill to create indexed beads and reeds on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1625 Plunge Roman Ogee Router Bit - 1" Cutting Diameter; 9/32" Small Diameter; 21/32" Cutting Height; 5/32" Radius
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3932 Classic Plunge Cutting Router Bit - 5/32" Radius; 3/4" Cutting Diameter; 1/4" Shank Diameter; 1/2" Cutting Height; 1-1/4" Shank Length
For decorative edge grooving on cabinet faces and for picture and mirror frames.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3933 Classic Plunge Cutting Router Bit - 5/32" Radius; 3/4" Cutting Diameter; 1/2" Shank Diameter; 1/2" Cutting Height; 1-1/2" Shank Length
For decorative edge grooving on cabinet faces and for picture and mirror frames.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3642 Cove & Bead Plunge Router Bit - 3/16", 3/16" Radius (Bead, Cove); 9/16" Cutting Height; 1-1/4" Cutting Diameter
Features an extra 1/2" wide cutter at bottom for fast and clean plunge.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1265 Plunge Flat Roundover Router Bit - 5/16" Radius; 1/2" Small Diameter; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3746 Plunge Ogee Router Bit - 1" Cutting Diameter; 3/8" Small Diameter; 9/16" Cutting Height; 3/16" Radius; 1-1/2" Shank Length
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3919 Plunge Roundover Router Bit - 5/16" Radius; 1/4" Small Diameter; 1/2" Shank Diameter; 7/16" Cutting Length; 1-1/2" Shank Length
Combination cutters for plunging through boards and for rounding corners as well as edge forming.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 351 Plunge Button Router Bit - 5/8" Cutting Diameter; 5/16" Button Diameter; 1/2" Shank Diameter; 3/16" Radius; 2" Shank Length
Designed for the Legacy Ornamental Milling machines. Plunge to mill buttons and fine details on flat mouldings and/or around the circumference of a spindle or leg. Adds just the right touch for those details that give style to any project.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3851 Raised Panel Groove, 25 Degree Face-Cut Router Bit - 1" Overall Diameter; 0.146" Profile Height; 3/8" Small Diameter; 0.4" Cutting Height; 1/4" Shank Diameter
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7506 Point Cutting Roundover Router Bit - 3/8" Radius; 1/4" Shank Diameter; 5/8" Cutting Length; 1-1/4" Shank Length
These bits can be used with the Legacy Ornamental Mill to create indexed beads and reeds on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1257 Plunge Flat Roundover Router Bit - 11/32" Radius; 3/16" Small Diameter; 1/4" Shank Diameter; 9/16" Cutting Length; 1-1/4" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7801 Bowl & Tray Plunge Router Bit - 1/4" Radius; 3/4" Cutting Diameter; 5/8" Cutting Height; 1/4" Shank Diameter; 1-1/4" Shank Length
This bit is designed to create a flat bottom, two square sides and two bottom radii in only one pass. Ideal for making dishes or serving trays.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7502 Point Cutting Roundover Router Bit - 3/8" Radius; 1/2" Shank Diameter; 5/8" Cutting Length; 2" Shank Length
These bits can be used with the Legacy Ornamental Mill to create indexed beads and reeds on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate S7801 Bowl & Tray Plunge Router Bit - 1/4" Radius; 3/4" Cutting Diameter; 5/8" Cutting Height; 1/2" Shank Diameter; 1-1/2" Shank Length
This bit is designed to create a flat bottom, two square sides and two bottom radii in only one pass. Ideal for making dishes or serving trays.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1284 Plunge Flat Roundover Router Bit - 1/4" Radius; 7/16" Small Diameter; 1/2" Shank Diameter; 1/2" Cutting Length; 2" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1285 Plunge Flat Roundover Router Bit - 5/16" Radius; 1/2" Small Diameter; 1/2" Shank Diameter; 1/2" Cutting Length; 2" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1275 Plunge Flat Roundover Router Bit - 5/16" Radius; 1/4" Small Diameter; 1/2" Shank Diameter; 9/16" Cutting Length; 2" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3914 Plunge Roundover Router Bit - 3/8" Radius; 1/4" Small Diameter; 1/4" Shank Diameter; 1/2" Cutting Length; 1-1/4" Shank Length
Combination cutters for plunging through boards and for rounding corners as well as edge forming.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 2504 Plunge Ball End Carbide Tipped Router Bit - 3/4" Cutting Diameter; 3/4" Cutting Length; 1/2" Shank Diameter; 3/8" Radius; 1-1/2" Shank Length
This bit creates a rounded inside edge on a slot that makes drawer opening easy.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7802 Bowl & Tray Plunge Router Bit - 1/4" Radius; 1" Cutting Diameter; 5/8" Cutting Height; 1/4" Shank Diameter; 1-1/4" Shank Length
This bit is designed to create a flat bottom, two square sides and two bottom radii in only one pass. Ideal for making dishes or serving trays.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 293 Straight Plunge Router Bit - 1-1/2" Cutting Diameter; 1-1/2" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7505 Point Cutting Roundover Router Bit - 1/2" Radius; 1/4" Shank Diameter; 3/4" Cutting Length; 1-1/4" Shank Length
These bits can be used with the Legacy Ornamental Mill to create indexed beads and reeds on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1269 Plunge Flat Roundover Router Bit - 11/32" Radius; 3/16" Small Diameter; 1/2" Shank Diameter; 9/16" Cutting Length; 2" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate S7802 Bowl & Tray Plunge Router Bit - 1/4" Radius; 1" Cutting Diameter; 5/8" Cutting Height; 1/2" Shank Diameter; 1-1/2" Shank Length
This bit is designed to create a flat bottom, two square sides and two bottom radii in only one pass. Ideal for making dishes or serving trays.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 353 Plunge Button Router Bit - 5/8" Cutting Diameter; 1/2" Button Diameter; 1/2" Shank Diameter; 3/10" Radius; 2" Shank Length
Designed for the Legacy Ornamental Milling machines. Plunge to mill buttons and fine details on flat mouldings and/or around the circumference of a spindle or leg. Adds just the right touch for those details that give style to any project.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3743 Plunge Ogee Router Bit - 1-1/4" Cutting Diameter; 1/2" Small Diameter; 5/8" Cutting Height; 3/16" Radius; 1-1/4" Shank Length
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3920 Plunge Roundover Router Bit - 3/8" Radius; 1/4" Small Diameter; 1/2" Shank Diameter; 1/2" Cutting Length; 1-1/2" Shank Length
Combination cutters for plunging through boards and for rounding corners as well as edge forming.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 7514 Point Cutting Roundover Router Bit - 7/16" Radius; 1/2" Shank Diameter; 11/16" Cutting Length; 2" Shank Length
These bits can be used with the Legacy Ornamental Mill to create indexed beads and reeds on flat or spindle stock.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 3747 Plunge Ogee Router Bit - 1-3/16" Cutting Diameter; 1/2" Small Diameter; 5/8" Cutting Height; 1/4" Radius; 1-1/2" Shank Length
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 5876 Hand Grip Plunge Router Bit - 1-5/8" Cutting Height; 1/4" Cutting Depth; 1-1/8" Cutting Diameter; 2" Shank Length; 1/2" Radius
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
|
Magnate 1276 Plunge Flat Roundover Router Bit - 3/8" Radius; 1/4" Small Diameter; 1/2" Shank Diameter; 5/8" Cutting Length; 2" Shank Length
When used with the Legacy ornamental machines, these bits make transitions from flat surfaces to beads on round or flat stock, i.e. astragal on columns or table legs.
|
|
|
|
Qty
|
Add
|
|
|
|
|
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>
|
