|
|
|
|
|
Magnate 101 Straight Router Bit - 1/8" Cutting Diameter; 1/2" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
A single flute bit has a faster cut speed than a multiple flute bit and should be used where cut speed is more important than cut finish. Though a single flute bit has a rougher cut than a multiple flute bit, it allows for faster chip clearance and maximum stock removal. Single flute bits are typically more suitable for being used on a lower horsepower router.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 102 Straight Router Bit - 3/16" Cutting Diameter; 1/2" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
A single flute bit has a faster cut speed than a multiple flute bit and should be used where cut speed is more important than cut finish. Though a single flute bit has a rougher cut than a multiple flute bit, it allows for faster chip clearance and maximum stock removal. Single flute bits are typically more suitable for being used on a lower horsepower router.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 103 Straight Router Bit - 1/4" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
A single flute bit has a faster cut speed than a multiple flute bit and should be used where cut speed is more important than cut finish. Though a single flute bit has a rougher cut than a multiple flute bit, it allows for faster chip clearance and maximum stock removal. Single flute bits are typically more suitable for being used on a lower horsepower router.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 104 Straight Router Bit - 1/4" Cutting Diameter; 1" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
A single flute bit has a faster cut speed than a multiple flute bit and should be used where cut speed is more important than cut finish. Though a single flute bit has a rougher cut than a multiple flute bit, it allows for faster chip clearance and maximum stock removal. Single flute bits are typically more suitable for being used on a lower horsepower router.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 201U Straight 1/4" Shank Diameter Router Bit - 7/32" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 123 Straight Router Bit - 1/4" Cutting Diameter; 3/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
A single flute bit has a faster cut speed than a multiple flute bit and should be used where cut speed is more important than cut finish. Though a single flute bit has a rougher cut than a multiple flute bit, it allows for faster chip clearance and maximum stock removal. Single flute bits are typically more suitable for being used on a lower horsepower router.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 201R Straight 1/4" Shank Diameter Router Bit - 15/64" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 201 Straight 1/4" Shank Diameter Router Bit - 1/4" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 124 Straight Router Bit - 5/16" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
A single flute bit has a faster cut speed than a multiple flute bit and should be used where cut speed is more important than cut finish. Though a single flute bit has a rougher cut than a multiple flute bit, it allows for faster chip clearance and maximum stock removal. Single flute bits are typically more suitable for being used on a lower horsepower router.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 201L Straight 1/4" Shank Diameter Router Bit - 1/4" Cutting Diameter; 1" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 201D Straight 1/4" Shank Diameter Router Bit - 9/32" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 202 Straight 1/4" Shank Diameter Router Bit - 5/16" Cutting Diameter; 1" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 203 Straight 1/4" Shank Diameter Router Bit - 3/8" Cutting Diameter; 1" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 204 Straight 1/4" Shank Diameter Router Bit - 7/16" Cutting Diameter; 1" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 231U Straight 1/2" Shank Diameter Router Bit - 7/32" Cutting Diameter; 1/2" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 205U Straight 1/4" Shank Diameter Router Bit - 31/64" Cutting Diameter; 1" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 231 Straight 1/2" Shank Diameter Router Bit - 1/4" Cutting Diameter; 3/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 205 Straight 1/4" Shank Diameter Router Bit - 1/2" Cutting Diameter; 1" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 205D Straight 1/4" Shank Diameter Router Bit - 17/32" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 206 Straight 1/4" Shank Diameter Router Bit - 9/16" Cutting Diameter; 1" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 125 Straight Router Bit - 3/8" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
A single flute bit has a faster cut speed than a multiple flute bit and should be used where cut speed is more important than cut finish. Though a single flute bit has a rougher cut than a multiple flute bit, it allows for faster chip clearance and maximum stock removal. Single flute bits are typically more suitable for being used on a lower horsepower router.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 223 Straight 1/2" Shank Diameter Router Bit - 3/8" Cutting Diameter; 3/4" Cutting Length; 1/2" Shank Diameter; 1-3/4" Shank Length
When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 212 Straight Router Bit - 5/16" Cutting Diameter; 1" Cutting Height; 8mm Shank Diameter; 1-1/4" Shank Length
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 232 Straight 1/2" Shank Diameter Router Bit - 5/16" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 234A Straight 1/2" Shank Diameter Router Bit - 7/16" Cutting Diameter; 3/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 233 Straight 1/2" Shank Diameter Router Bit - 3/8" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 234 Straight 1/2" Shank Diameter Router Bit - 7/16" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 261 Straight Plunge Router Bit - 1/4" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 208R Straight 1/4" Shank Diameter Router Bit - 11/16" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 207 Straight 1/4" Shank Diameter Router Bit - 5/8" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 262 Straight Plunge Router Bit - 5/16" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 126 Straight Router Bit - 1/2" Cutting Diameter; 1-1/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
A single flute bit has a faster cut speed than a multiple flute bit and should be used where cut speed is more important than cut finish. Though a single flute bit has a rougher cut than a multiple flute bit, it allows for faster chip clearance and maximum stock removal. Single flute bits are typically more suitable for being used on a lower horsepower router.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 234D Straight 1/2" Shank Diameter Router Bit - 15/32" Cutting Diameter; 1-1/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 263 Straight Plunge Router Bit - 3/8" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 281 Straight Plunge Router Bit - 1/4" Cutting Diameter; 3/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 208 Straight 1/4" Shank Diameter Router Bit - 3/4" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 235 Straight 1/2" Shank Diameter Router Bit - 1/2" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 265 Straight Plunge Router Bit - 1/2" Cutting Diameter; 1" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 282 Straight Plunge Router Bit - 5/16" Cutting Diameter; 3/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 208U Straight 1/4" Shank Diameter Router Bit - 23/32" Cutting Diameter; 1" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 267 Straight Plunge Router Bit - 5/8" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 245 Straight 1/2" Shank Diameter Router Bit - 13/32" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 253 Straight Plunge Left-Hand Router Bit - 3/8" Cutting Diameter; 1" Cutting Height; 1/2" Shank Diameter; 2-5/8" Overall Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 283 Straight Plunge Router Bit - 3/8" Cutting Diameter; 1-1/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 235U Straight 1/2" Shank Diameter Router Bit - 31/64" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 236 Straight 1/2" Shank Diameter Router Bit - 9/16" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 284 Straight Plunge Router Bit - 7/16" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 178 Straight 5 Degree Tapered Router Bit - 3/8" Cutting Diameter; 5/16" Cutting Length; 3/8" Shank Diameter; 2-1/2" Overall Length
This bit is designed for the Castle Pocket machine. It comes with 2 flute tapered carbide tipped cutters which can cut high-pressure laminates, MDF, and solid surface materials.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 209R Straight 1/4" Shank Diameter Router Bit - 13/16" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 268 Straight Plunge Router Bit - 3/4" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 237K Straight 1/2" Shank Diameter Router Bit - 5/8" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 127 Straight Router Bit - 1/2" Cutting Diameter; 1-1/2" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
A single flute bit has a faster cut speed than a multiple flute bit and should be used where cut speed is more important than cut finish. Though a single flute bit has a rougher cut than a multiple flute bit, it allows for faster chip clearance and maximum stock removal. Single flute bits are typically more suitable for being used on a lower horsepower router.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 235A Straight 1/2" Shank Diameter Router Bit - 1/2" Cutting Diameter; 1-1/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 236U Straight 1/2" Shank Diameter Router Bit - 17/32" Cutting Diameter; 1-1/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 209 Straight 1/4" Shank Diameter Router Bit - 7/8" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 284D Straight Plunge Router Bit - 15/32" Cutting Diameter; 1-1/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 285 Straight Plunge Router Bit - 1/2" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 233L Straight 1/2" Shank Diameter Router Bit - 3/8" Cutting Diameter; 1-1/2" Cutting Length; 1/2" Shank Diameter; 2" Shank Length
When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 287K Straight Plunge Router Bit - 5/8" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 237U Straight 1/2" Shank Diameter Router Bit - 19/32" Cutting Diameter; 1-1/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 210 Straight 1/4" Shank Diameter Router Bit - 1" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 235L Straight 1/2" Shank Diameter Router Bit - 1/2" Cutting Diameter; 1-1/2" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 237D Straight 1/2" Shank Diameter Router Bit - 21/32" Cutting Diameter; 1-1/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 237 Straight 1/2" Shank Diameter Router Bit - 5/8" Cutting Diameter; 1-1/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 128 Straight Router Bit - 1/2" Cutting Diameter; 2" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
A single flute bit has a faster cut speed than a multiple flute bit and should be used where cut speed is more important than cut finish. Though a single flute bit has a rougher cut than a multiple flute bit, it allows for faster chip clearance and maximum stock removal. Single flute bits are typically more suitable for being used on a lower horsepower router.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 238R Straight 1/2" Shank Diameter Router Bit - 11/16" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 269 Straight Plunge Router Bit - 7/8" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 237A Straight 1/2" Shank Diameter Router Bit - 5/8" Cutting Diameter; 1-1/2" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 238U Straight 1/2" Shank Diameter Router Bit - 23/32" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 285L Straight Plunge Router Bit - 1/2" Cutting Diameter; 1-1/2" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 238 Straight 1/2" Shank Diameter Router Bit - 3/4" Cutting Diameter; 1-1/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 270 Straight Plunge Router Bit - 1" Cutting Diameter; 3/4" Cutting Length; 1/4" Shank Diameter; 1-1/4" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 288U Straight Plunge Router Bit - 23/32" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 238D Straight 1/2" Shank Diameter Router Bit - 25/32" Cutting Diameter; 1-1/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 235B Straight 1/2" Shank Diameter Router Bit - 1/2" Cutting Diameter; 2" Cutting Length; 1/2" Shank Diameter; 2" Shank Length
When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 239R Straight 1/2" Shank Diameter Router Bit - 13/16" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 288 Straight Plunge Router Bit - 3/4" Cutting Diameter; 1-1/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 285B Straight Plunge Router Bit - 1/2" Cutting Diameter; 2" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 2700 Surface Planing ( Bottom Cleaning ) Router Bit - 3/4" Cutting Diameter; 1/4" Shank Diameter; 3/8" Cutting Length; 1-1/4" Shank Length
Good for cleaning out dadoes and cutting wide square grooves. Leaves a smooth clean finished surface. Also perfect for milling round, square, or flat stock on the Legacy Ornamental Mill.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 239A Straight 1/2" Shank Diameter Router Bit - 27/32" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 237L Straight 1/2" Shank Diameter Router Bit - 5/8" Cutting Diameter; 2" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 239 Straight 1/2" Shank Diameter Router Bit - 7/8" Cutting Diameter; 1-1/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 2701 Surface Planing ( Bottom Cleaning ) Router Bit - 3/4" Cutting Diameter; 1/2" Shank Diameter; 15/32" Cutting Length; 2" Shank Length
Good for cleaning out dadoes and cutting wide square grooves. Leaves a smooth clean finished surface. Also perfect for milling round, square, or flat stock on the Legacy Ornamental Mill.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 238B Straight 1/2" Shank Diameter Router Bit - 3/4" Cutting Diameter; 2" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 240 Straight 1/2" Shank Diameter Router Bit - 1" Cutting Diameter; 1-1/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 289 Straight Plunge Router Bit - 7/8" Cutting Diameter; 1-1/4" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 151 Straight 3/4" Shank Diameter Router Bit - Right Hand Rotation; 3/4" Cutting Diameter; 1-1/4" Cutting Length; 3-1/4" Overall Length; 3/4" Shank Diameter
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 235C Straight 1/2" Shank Diameter Router Bit - 1/2" Cutting Diameter; 2-1/2" Cutting Length; 1/2" Shank Diameter; 2" Shank Length
When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 2712 Surface Planing ( Bottom Cleaning ) Router Bit - 7/8" Cutting Diameter; 1/4" Shank Diameter; 3/8" Cutting Length; 1-1/2" Shank Length
Good for cleaning out dadoes and cutting wide square grooves. Leaves a smooth clean finished surface. Also perfect for milling round, square, or flat stock on the Legacy Ornamental Mill.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 2702 Surface Planing ( Bottom Cleaning ) Router Bit - 7/8" Cutting Diameter; 1/2" Shank Diameter; 15/32" Cutting Length; 2" Shank Length
Good for cleaning out dadoes and cutting wide square grooves. Leaves a smooth clean finished surface. Also perfect for milling round, square, or flat stock on the Legacy Ornamental Mill.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 295 Straight Plunge Router Bit - 5/8" Cutting Diameter; 2" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 290 Straight Plunge Router Bit - 1" Cutting Diameter; 1" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
This 2-flute plunge straight bit feature an extra carbide cutter at bottom for faster and cleaner plunging and mortising.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 241 Straight 1/2" Shank Diameter Router Bit - 1" Cutting Diameter; 2" Cutting Length; 1/2" Shank Diameter; 2" Shank Length
When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 242 Straight 1/2" Shank Diameter Router Bit - 1-1/4" Cutting Diameter; 1-1/2" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 2713 Surface Planing ( Bottom Cleaning ) Router Bit - 1" Cutting Diameter; 1/4" Shank Diameter; 3/8" Cutting Length; 1-1/2" Shank Length
Good for cleaning out dadoes and cutting wide square grooves. Leaves a smooth clean finished surface. Also perfect for milling round, square, or flat stock on the Legacy Ornamental Mill.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 244 Straight 1/2" Shank Diameter Router Bit - 1-1/8" Cutting Diameter; 1-1/2" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 2703 Surface Planing ( Bottom Cleaning ) Router Bit - 1" Cutting Diameter; 1/2" Shank Diameter; 15/32" Cutting Length; 2" Shank Length
Good for cleaning out dadoes and cutting wide square grooves. Leaves a smooth clean finished surface. Also perfect for milling round, square, or flat stock on the Legacy Ornamental Mill.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 152 Straight 3/4" Shank Diameter Router Bit - Right Hand Rotation; 3/4" Cutting Diameter; 2" Cutting Length; 4" Overall Length; 3/4" Shank Diameter
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 243 Straight 1/2" Shank Diameter Router Bit - 1-1/2" Cutting Diameter; 1-1/2" Cutting Length; 1/2" Shank Diameter; 1-1/2" Shank Length
When used on the Legacy Ornamental Mill these bits can mill grooves and mortises, or mill contoured profiles when following a template; simulating a copy lathe.
|
|
|
|
Qty
|
Add
|
|
|
|
|
|
|
|
Magnate 2723 Surface Planing ( Bottom Cleaning ) Router Bit - 1-3/16" Cutting Diameter; 1/2" Shank Diameter; 15/32" Cutting Length; 2" Shank Length
Good for cleaning out dadoes and cutting wide square grooves. Leaves a smooth clean finished surface. Also perfect for milling round, square, or flat stock on the Legacy Ornamental Mill.
|
|
|
|
Qty
|
Add
|
|
|
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>
|